Owners of modern household appliances are often faced with a dilemma: is it really necessary to interfere with the operation of smart systems, or does automation do it on its own? Double-chamber refrigerators Beko are famous for their reliability and well-thought-out cooling system, however, even the most advanced models require periodic attention from the user. Many people mistakenly believe that the presence of a system No Frost completely eliminates the need to defrost the unit, but this is not entirely true.
The accumulation of condensation, the formation of an ice crust on the back wall of the freezer, or the appearance of an unpleasant odor are signals that cannot be ignored. If you notice that products they have begun to freeze to each other, and the door no longer fits tightly, then it is time for maintenance. In this article we will look in detail at how to perform this procedure safely, quickly and without the risk of damaging compressor or evaporator.
The correct approach to defrosting will extend the life of your refrigerator Beko for years. It is important to understand that the process differs depending on the type of cooling system: drip or air. Ignoring simple care rules can lead to increased energy consumption and decreased efficiency. frost. Let's look at all the nuances so that your equipment works like new.
Is it necessary to defrost Beko with the No Frost system
The question of the need to defrost refrigerators Bekoequipped with the system No Frostis surrounded by many myths. Technically, in such models, moisture does not turn into ice on products or shelves, but evaporates due to constant air circulation and the operation of a special one. However, this does not mean that the device is completely autonomous in terms of maintenance. Heating element. However, this does not mean that the device is completely autonomous in terms of maintenance.
Once a year, and in some cases more often, it is recommended to carry out a complete defrost even for systems No Frost. This is necessary for hygienic cleaning and removal of dust that accumulates in hard-to-reach places where it cannot reach. In addition, a biofilm may form in the drainage channels over time, which cannot be removed without completely shutting down and flushing the system. fan. In addition, biofilm can form in the drainage channels over time, which cannot be removed without completely shutting down and flushing the system.
⚠️ Attention: Ignoring the annual maintenance of refrigerators No Frost can lead to clogging of the drainage hole, which will cause water leakage on kitchen floor.
If you live in a region with hard water or high humidity, the frequency of procedures should be increased. Under such conditions scale ice can form faster, disrupting the operation of temperature sensors. Regular maintenance allows the system cooling to work in optimal mode without overloading the engine.
Preparation for the defrosting procedure
Before starting active action, it is necessary to properly prepare the workspace and the unit itself. This will take no more than 15 minutes, but will save your floors from flooding and your food from spoilage. First, empty the refrigerator compartments Beko of all supplies.
Place food in bowls with ice or in thermal bags to maintain temperature conditions. If you have a neighbor or relative with an empty refrigerator, you can ask for help. After this, remove all removable elements: shelves, drawers, egg trays and containers on the door. It is better to wash them separately with warm water and a mild detergent.
- 🧊 Prepare several large towels or rags to absorb moisture.
- 🧹 Find a flat tray or baking sheet that can be placed under the drain.
- 🧤 Wear rubber gloves if you plan to use cleaning products.
- 🔌 Determine in advance the place where you can move the refrigerator to access the back wall.
It is important to move the refrigerator from the wall to a distance sufficient for a person to walk through. This will provide ventilation and convenient access to compressor and the rear panel. Don't forget to check if the water supply hose is kinked if your model Beko has a water supply system in the door.
☑️ Ready for defrosting
Step-by-step instructions for defrosting
The most important stage is the thawing process itself. Many people make the mistake of trying to speed it up with a hairdryer or hot water. For technology Beko such methods can be fatal. A sharp temperature change causes deformation of plastic parts and can damage pipeline the refrigerant.
Disconnect the refrigerator from the power supply. Simply unplug the cord from the outlet. Set the temperature control to the "0" or "Off" position if the model allows this without shutting down. Leave cell doors open. So that they do not interfere with the passage and do not slam, you can fix them in the open position with a belt or ask someone to hold them, although it is better to just leave them open.
The time of natural defrosting depends on the amount of frozen ice and the temperature in the room. This process usually takes from 4 to 10 hours. If the ice crust is very thick, the process may take longer. At this time, moisture will flow into a special groove at the bottom of the refrigerator compartment and then into the drainage hole.
⚠️ Attention: It is strictly forbidden to use sharp objects (knives, screwdrivers) to chip ice. One careless movement will break through the thin wall evaporator, and the refrigerator will stop freezing forever.
During the melting process, periodically check the condensate tray (if your model has one Beko) and pour out the water. If water begins to leak onto the floor, immediately add additional rags. Make sure the drainage hole is not clogged with crumbs or pieces of ice.
What to do if the ice is not melting?
If 6 hours have passed and the ice block in the freezer is not even moving, the room may be too cold. Try increasing the overall temperature in the room or carefully direct a flow of warm (not hot!) air from the heater towards the open door, maintaining a distance of at least 50 cm. Do not use a hair dryer!
Cleaning and disinfecting internal chambers
After all the ice has melted and the internal surfaces have dried, the cleaning stage begins. Even if there is no visible contamination, bacteria may have grown inside, causing mold and an unpleasant odor. For plastic surfaces of refrigerators Beko soft, non-abrasive products are best suited.
Make a solution of warm water and a small amount of baking soda or a special refrigerator cleaner. Thoroughly wipe all interior walls, door seals, and chamber corners. Pay special attention to the area around the drainage hole - this is where mucus most often accumulates.
| Cleaning area | Recommended product | Tools |
|---|---|---|
| Plastic shelves | Soda solution (1 tsp per liter) | Soft sponge |
| Door seals | Soap solution | Cotton swab |
| Metal back walls | Water with vinegar | Microfiber cloth |
| Drainage hole | Warm water | Cotton stick or syringe |
After wet cleaning, be sure to wipe all surfaces dry with a clean cloth. Remaining moisture may turn back into ice the first time you turn it on. Let the refrigerator Beko "ventilate" for another 20-30 minutes with the doors open so that the smell of detergents completely disappears.
Be sure to wash and dry all removed shelves and drawers before installing them back. Cold glass placed in warm air can crack, and wet plastic will become a source of moisture.
Starting the refrigerator after defrosting
When the unit is completely cleaned and dry, it can be assembled. Replace all shelves, containers and drawers. Make sure they fit snugly and correctly according to the guides. Now is the time to turn on the refrigerator.
After turning on, do not rush to load the food. Let the equipment Beko run idle. The compressor needs time to reach operating mode and cool the chambers to the set temperatures. This usually takes from 2 to 4 hours, but for complete stabilization temperature conditions it is better to wait 6-8 hours.
If your model is equipped with electronic control, make sure that the error indicators do not light up on the display. After the first cooling cycle, you can gradually add food. You shouldn’t overcrowd the refrigerator right away - this will create an extra load on the cooling system cooling system.
Typical mistakes when defrosting
Even knowing the instructions, people often make mistakes that can cost expensive repairs. The most common one is using a hair dryer to speed up the process. Hot air unevenly heats plastic and metal tubes, which leads to microcracks. In the long term, this destroys the structure of the materials.
The second mistake is leaving the refrigerator on while defrosting. Some users simply open the doors and wait for the ice to melt, hoping that the compressor will cope with the heat influx. This causes wear and tear on the engine and can cause it to overheat or break relay.
- ❌ Using knives and scrapers to remove ice.
- ❌ Pouring boiling water directly onto the ice block.
- ❌ Turning on the unit before all surfaces are dry.
- ❌ Ignoring cleaning the drainage system.
It is also dangerous to use aggressive chemicals containing chlorine or strong acids. They can corrode the plastic and damage the rubber seals, which over time will become hard and no longer hold the cold. For equipment Beko use only gentle products.
⚠️ Attention: If after defrosting the refrigerator hums louder than usual or extraneous sounds appear, immediately turn it off and contact service. It is possible that during the melting process, water got onto the electrical contacts.
Frequently asked questions (FAQ)
How often do you need to defrost the Beko No Frost refrigerator?
Models with the system No Frost do not require frequent defrosting to remove ice, since they do this automatically. However, for hygienic purposes and odor prevention, it is recommended to completely defrost and wash it once a year. If you notice a decrease in operating efficiency, the procedure can be carried out earlier.
Is it possible to defrost a refrigerator without unplugging it?
No, this is strictly prohibited. Defrosting should only take place when the power supply is completely disconnected. Operating the compressor with the doors open will lead to its overload and possible failure, as well as the formation of a new ice crust instead of melting the old one.
What to do if the water does not leave the drain hole?
Most likely, the drain tube is clogged with crumbs or ice. Use a long bottle brush or soft wire wrapped in cotton wool and gently clean out the channel. You can also use a syringe with warm water to force the clog out.
Why does the refrigerator take a long time to reach the temperature after defrosting?
This is normal if you have just loaded a large amount of food at room temperature. Also, the temperature rise time depends on the ambient temperature in the room. If the refrigerator is empty and remains warm for more than 10 hours, there may be damage to the system or a freon leak.
Do you need to lubricate the seals after defrosting?
Yes, this is a useful procedure. After washing and drying the rubber seals on the doors Beko it is recommended to wipe them with a special silicone grease or glycerin. This will preserve the elasticity of the rubber, prevent it from drying out and ensure a tight fit of the door.