Have you noticed on the refrigerator control panel Atlant a mysterious button with the inscription “Super” or an icon of a snowflake with a star? This mode raises a lot of questions: why is it needed, how to use it correctly, and whether it will harm the equipment. Unlike standard cooling modes, “Super” activates intensive freezing or cooling —but it is not always clear when this is really necessary.
In this article we will look in detail at what is hidden behind the "Super" button in refrigerators Atlant (including model Atlant XM, Atlant MXM and other series), how it works in the freezer and refrigerator compartments, and why its improper use can lead to icing or overload of the compressor. You will also learn how the “Super-freezing” (Super Freeze) and “Super-cooling” (Super Cool) modes differ, and how to correctly combine them to save energy.
Spoiler: if you have never used this feature, you are missing out on the opportunity to save on electricity and prolong the freshness of your food. But there are also pitfalls - read on about that.
What does the “Super” mode on a refrigerator mean Atlant: decoding the function
The "Super" button on refrigerators Atlant is responsible for forced cooling - but its action depends on in which chamber it is activated:
- 🧊 In the freezer (designation "
Super Freeze" or a snowflake with an asterisk) - starts intensive freezing at temperatures up to-24°C(against standard-18°C). Used for quick freezing of large batches of food (for example, berries or meat). - ❄️ In the refrigerator compartment (designation "
Super Cool" or a snowflake with a wave) - lowers the temperature to+2°C(instead of the usual+4...+5°C). It is used for cooling hot dishes or drinks without the risk of spoiling other products.
Important: on some models Atlant (for example, Atlant XM 4021-000 or Atlant MXM 2835-90) the "Super" button can work simultaneously for both cameras, but more often it is separate. Check this in the instructions for your model - usually the control circuit is printed on a sticker inside the camera or on the top panel.
"Super" mode not intended for constant use - it creates increased load on the compressor. On average, it is recommended to turn it on no longer than 24–48 hours in a row. Next we will tell you why this is critical.
How “Super Freeze” works (Super Freeze): when and how to turn it on
The “Super Freeze” mode in the freezer Atlant is activated for quick freezing of fresh products without losing their structure. For example, if you bought 5 kg of strawberries or brought a catch from fishing, the standard temperature -18°C may not cope - the products will be frozen for too long, which will lead to the formation of large ice crystals and deterioration in taste.
How to properly use:
- Load the products into the freezer, distributing them in one layer (do not stack them!).
- Press the "Super" button (or "
Super Freeze") - the indicator on the panel will light up (usually yellow or red). - Leave the mode on for
12–24 hours—this is enough for complete freezing. - After freezing be sure to turn it off mode, otherwise the compressor will wear out.
⚠️ Attention: If there are already food items in the freezer, turning on “Super Freeze” can lead to them freezing (for example, shrimp will become “rubbery” and greens will lose color). Before activating the mode, check that there are no cold-sensitive products lying there.
On models with the system No Frost (for example, Atlant XM 4625-101) Super Freeze also speeds up the circulation of cold air, preventing frost from forming. However, if there is already ice in the chamber, the mode will not help - you will need defrosting.
Make sure that the products are dry (moisture accelerates the formation of ice)
Place them at a distance of 2-3 cm from each other
Check that the door closes tightly
Do not load the chamber to more than 70% of the volume-->
"Super cooling" (Super Cool) in the refrigerator compartment: nuances of use
In the refrigerator compartment, the "Super" mode (or “Super Cool") lowers the temperature to +2°C, which is useful in three cases:
- 🍲 For rapid cooling of hot foods dishes (soups, roasts) without the risk of spoilage of other products.
- 🥛 For extending freshness perishable foods (milk, cheese, sausages) in the heat.
- 🍷 For cooling drinks (for example, champagne or beer) in 30–60 minutes.
How to turn it on:
- Place the products in the refrigerator compartment, avoiding overloading the shelves.
- Press the “Super” button - indicator on the panel flashes or lights up continuously.
- After
1–2 hourscheck the temperature of the food (for example, with a meat thermometer). - Turn off the mode after achieving the desired result.
Warning: if you leave “Super Cooling” on more than 6 hours, vegetables, fruits and even some sauces may freeze (for example, mayonnaise will separate). The mode also increases energy consumption by 15–20%.
What is the danger of constantly using the “Super” mode
Many refrigerator owners Atlant erroneously believe that the “Super” mode can be kept on constantly for “better food preservation”. This is gross errorwhich leads to the following problems:
| Problem | Consequences | How to avoid |
|---|---|---|
| Overload compressor | Reduced service life by 30–40%, risk of breakdown | Use the mode for no longer than 24 hours |
| Icing of the evaporator | Deterioration of cooling, increased energy consumption | Defrost the refrigerator regularly |
| Food spoilage | Freezing or drying (for example, bread becomes “stone”) | Control the time the mode is turned on |
| Increased noise | The compressor operates at maximum power, which can interfere at night | Do not turn on the mode at night |
It is especially dangerous to leave “Super” turned on in refrigerators Atlant s drip defrosting system (for example, Atlant MX 2842). In such models, intensive cooling leads to ice formation on the rear wallwhich subsequently requires manual defrosting.
⚠️ Attention: On some models Atlant (for example, series New Wave), the “Super” mode is automatically disabled after 8–12 hours. However, in old refrigerators (manufactured before 2018) this protection may not be present - keep track of the time manually!
Why the “Super” button does not work: possible reasons and solutions
If after pressing the “Super” button nothing happens (the indicator does not light up, the temperature does not change), check the following points:
- 🔌 No power — make sure that the refrigerator is connected to the network and other indicators are lit on the panel.
- 🛠️ Broken button —if when there is no click when pressed, perhaps the contacts have oxidized or the microcircuit is broken (needs repair).
- ❄️ Evaporator frozen —if there is severe icing, the sensors can block the inclusion of the “Super” mode. Defrost refrigerator.
- 📡 Electronic unit failure —if the indicators blink chaotically, try unplugging the refrigerator from the outlet for 10 minutes (reset settings).
On models with electronic control (for example, Atlant XM 6025-031) the reason may be firmware failure. In this case, contacting a service center will help Atlant to reflash the unit.
What to do if “Super” turns on spontaneously?
If the mode is activated without your participation, this is a sign of a malfunction of the thermostat or electronic module. Required:
1. Unplug the refrigerator for 15–20 minutes.
2. Check whether the button shorts (for example, due to moisture).
3. If the problem repeats, call a technician to diagnose the thermostat or control board.
How to save energy with the “Super” mode
Despite the increased energy consumption, the “Super” mode can be used economicalif you follow these tips:
- ⏱️ Turn on 1–2 hours before loading the products —this way the chamber will have time to cool down, and the compressor will spend less energy on freezing.
- 🌡️ Combine with the correct load —do not put hot foods in the refrigerator (even in the “Super” cooling mode). Cool them to room temperature.
- 🔄 Use the “Super” mode only when necessary —for example, once a week to freeze berries, not daily.
- 💡 Keep an eye on the door seal —if it is worn out, the cold will go away and the compressor will work longer, wasting excess energy.
Comparison of energy consumption (for example Atlant XM 4426-000):
| Mode | Energy consumption (kWh in day) | Note |
|---|---|---|
| Standard | 0.8–1.2 | At a temperature of +5°C in the refrigerator compartment |
| "Super cooling" | 1.5–1.8 | When reduced to +2°C |
| "Super freezing" | 1.8–2.2 | At a temperature of -24°C in the freezer |
Conclusion: if you use the "Super" mode short intervals (no longer than 6-8 hours), the excess energy consumption will be minimal. But constant. turning on can increase electricity bills by 25–30%.
What to do if the refrigerator is in “Super” mode. iced up
If you left “Super Freeze” or “Super Cooling” on for too long, ice may have formed on the walls of the chamber. In this case:
- Unplug the refrigerator.
- Take out all the food and put it in a cooler bag or wrap with a cloth.
- Leave the door open for
4–6 hours(to speed up, you can put a container of warm water inside). - After defrosting, wipe the chamber with a dry cloth and turn on the refrigerator in normal mode.
On models with No Frost (for example, Atlant XM 6321-100) icing is unlikely, but if it occurs, this is a sign malfunctions of the defrosting system. In this case, defrosting will help temporarily, but diagnostics at the service center will be required.
⚠️ Attention: Never use a hair dryer or sharp objects (knives, forks) to speed up defrosting - this can damage the seal or puncture the evaporator!
FAQ: Frequently asked questions about the “Super” mode on refrigerators Atlant
Is it possible to turn on “Super Freezing” at night?
It is not recommended. The compressor runs almost non-stop in this mode, which can cause overheating and increased noise. It is better to turn on the mode during the day and turn it off before going to bed.
Why do products after “Super Cooling” do they freeze?
This happens if the mode is turned on for too long (more than 4-6 hours) or the products are located close to the back wall, where the temperature is lower. To avoid freezing, use the mode in short intervals and distribute the products evenly.
How to disable the “Super” mode if the button does not work?
If the button jammed, unplug the refrigerator for 10-15 minutes - this will reset the settings. If the problem persists, the control panel will need to be repaired.
Is the “Super” mode harmful for the refrigerator?
No, if you use it according to the instructions (no longer than 24 hours), however, constant activation reduces the life of the compressor and increases the risk of breakdown.
Is there a “Super” mode on older models? Atlant (before 2010)?
Most older models (for example Atlant MXM 1705) do not have this function. Instead, a mechanical thermostat with manual temperature control is used.