Modern Belarusian-made refrigerators Atlant equipped with many useful options that make life in the kitchen much easier. One of the most popular functions is super freezing, which allows you to quickly cool a large amount of fresh food. This mode is especially relevant after going to the store or harvesting, when you need to preserve the vitamins and structure of food.
Many equipment owners do not fully understand the difference between regular freezing and an accelerated cycle, which can lead to inefficient use of resources. In this article, we will analyze in detail how exactly this option works in different models, how much time it consumes and whether it is worth leaving it on all the time. The super freeze function activates the compressor at maximum power, ignoring standard rest cycles, which allows you to lower the temperature in the freezer to -24°C and below.
Understanding the principles of operation of your equipment is the first step towards her long service. We will look at technical nuances that will help you operate the device correctly and avoid common mistakes when storing supplies.
The principle of operation of the intensive cooling mode
Function Super Freeze (or “Super Freeze”) in refrigerators Atlant designed for emergency temperature reduction in freezer compartment. During normal operation, the compressor turns on and off based on signals from the thermostat, maintaining the specified temperature range. When the super-freeze mode is activated, the control system blocks the compressor from turning off, forcing it to work continuously.
This is necessary so that the heat brought by warm products does not have time to heat already frozen reserves. If you put a large amount of fresh food into a regular chamber, the temperature inside will rise, and nearby food may partially defrost, losing its properties. The intensive mode prevents this process by creating a powerful cold flow.
It is important to note that in models with the system No Frost this process is accompanied by increased operation of fans that provide air circulation. In devices with a drip system (“crying wall”), cooling occurs through the walls of the chamber, so the time to reach the target temperature may be slightly higher.
- ❄️ Continuous operation: The compressor does not go into standby mode while the option is activated.
- 📉 Temperature reduction: Indicators can drop below standard -18°C, reaching -22...-24°C.
- ⏱️ Time limit: In most models, the mode works automatically from 12 to 72 hours, after which it turns off itself.
How to enable and disable the function on different models
Control of the fast freezing mode in refrigerators Atlant depends on the series of the device and the type of control panel. Old mechanical models may have a separate switch on the case, while in modern electronic versions all control is concentrated on a digital display.
To activate the function on models with electronics, you usually need to press the button with the image of a snowflake or the inscription Super Freeze. The display will light up to confirm that the process has started. In some cases, you may need to hold the button for 3 seconds to enter the settings menu.
⚠️ Attention: Do not leave Super Freeze mode on longer than necessary. Long-term operation of the compressor without interruption leads to increased energy consumption and accelerated wear of the motor.
The mode can also be turned off by pressing the same button. If your model has an automatic cancellation after 24 or 48 hours, the light will turn off on its own. In manual models, the user must monitor the operating time of the function.
☑️ Check before turning on the mode
Comparison of modes: regular freezing versus super freezing
Users often wonder whether it makes sense to overpay for electricity when using an accelerated cycle. The main difference lies in the speed at which ice crystals pass through the cellular structure of the products. With slow cooling, large crystals are formed that destroy cell walls, which leads to loss of juice during defrosting.
Super Freeze allows you to create many small crystals that do not damage the structure of meat, fish or vegetables. This preserves the taste, color and usefulness of the product. The normal mode is good for maintaining the temperature, but not for the initial cooling of a large volume.
Below is a table showing the key differences between the two modes of operation of the refrigerator Atlant.
| Parameter | Normal mode | Super freezing |
|---|---|---|
| Compressor operation | Cyclic (on/off) | Continuous |
| Target temperature | -18°C | up to -24°C and below |
| Energy consumption | Standard | Increased |
| Operating time | Continuous (as needed) | Limited (usually up to 48 hours) |
Influence on the structure of meat
During rapid freezing, the water inside the meat cells does not have time to collect into large blocks of ice. This means that after defrosting, the steak or fish will remain juicy and will not turn into a dry mass.
Influence on food and preservation of vitamins
The main purpose of using the mode intensive cooling is to preserve the quality of products. When you place warm or room temperature foods in the freezer, they become a source of heat. Without turning on super freezing, neighboring frozen stocks may begin to thaw, which will trigger the process of bacterial growth.
Rapid freezing is especially important for berries, mushrooms and minced meat. These products have a delicate structure and high moisture content. If you freeze them slowly, they will lose their shape and taste. The mode Super Freeze “seals” the benefits inside.
In addition, this mode is useful if you plan to store products for a very long time. A lower temperature suppresses the activity of enzymes and microorganisms more effectively than the standard -18 degrees.
- 🍓 Berries and fruits: Retain their shape and do not turn into porridge.
- 🥩 Meat and fish: Remain juicy, the loss of “meat juice” is minimized.
- 🥬 Vegetables: Retain crunch and color after defrosting.
Energy consumption and load on equipment
Using the function superfreezing inevitably leads to an increase in electricity consumption. The compressor, working non-stop, consumes the maximum current for which it is designed. In modern models Atlant with energy efficiency class A+ or A++ this growth is less noticeable, but it is there.
Long-term operation in this mode creates an increased thermal load on the motor windings and compression unit. That is why manufacturers limit the operating time of the function or make it automatic. This is protection against overheating and premature failure.
No need to worry about the equipment if you use the function according to the instructions. Refrigerators Atlant are designed taking into account such loads. Problems can only arise if the thermostat or heat removal system is faulty.
⚠️ Attention: If you notice that the refrigerator is humming louder than usual or the case is getting very hot in the compressor area during super freezing, check that the door is tightly closed and that the condenser is not clogged with dust.
Frequent errors during operation
Despite the simplicity of control, users often make mistakes that reduce the effectiveness of the function to zero. The most common of them is turning on the “just in case” mode and forgetting about it. This leads to excessive energy consumption and excessive freezing of products that do not require it.
Another mistake is loading products without prior packaging. In the intensive blowing mode (in systems No Frost), unpacked food will quickly become airy and covered with an ice crust (“frost burn”). This degrades the taste and texture.
Also, many people ignore the need to leave gaps between foods. For effective circulation of cold air, the space should be filled no more than 70-80% when the mode is turned on.
What to do if the super freeze indicator does not light up?
If you pressed the button, but the indication did not appear, check whether the control panel is locked (Child Lock function). Also make sure that the refrigerator is connected to the mains and is in normal operation mode, and not in defrosting mode.
Is it possible to turn on super freezing to cool drinks?
Technically it is possible, but not advisable. To cool bottles, it is better to use a separate shelf in the refrigerator compartment or the “Quick Cool” function (if available), since the freezer is designed for temperatures below zero, and the glass can burst from a sudden change.
How long does a full cycle take?
In most models Atlant the automatic cycle lasts about 24 hours. After this, the refrigerator will automatically return to the standard temperature maintenance mode.
Is this harmful for the compressor?
Short-term operation in super-freezing mode (up to 48 hours) is absolutely safe for a working compressor. The service life of the equipment is designed for such periodic peak loads.
Why don’t food freeze even with super freezing turned on?
Perhaps the freezer door does not fit tightly, or you loaded too many warm products at the same time. Also, the cause may be a malfunction of the thermostat or a refrigerant leak.