Have you noticed a mysterious asterisk (*) on the refrigerator control panel Atlant and not do you know what it means? This symbol often raises questions among owners of Belarusian brand equipment - especially if the instructions are lost or written in complex language. In fact, the asterisk performs an important function related to temperature control i energy saving, but its purpose depends on the refrigerator model and year of manufacture.
In this article we will analyze in detail what is hidden behind this symbol: from basic operating modes to configuration nuances in modern and outdated models Atlant. You will learn how to properly use the star for optimal food storage, what mistakes users most often make, and what to do if the symbol blinks or does not respond to touches. And also, let’s debunk the myths about the “secret functions” that are sometimes attributed to this button.
What does the asterisk on the refrigerator mean Atlant: basic functions
The asterisk (*) on the control panel refrigerators Atlant is universal symbol for activating special modes. Its meaning may differ depending on the series of equipment, but most often it is responsible for:
- 🔹 Economic mode (reduced energy consumption)
- ❄️ Accelerated freezing (in freezers)
- 🌡️ Temperature adjustment (additional cooling)
- ⚙️ Reset settings (in some models with electronic control)
In most cases, the asterisk works like switch between standard and enhanced modes. For example, in refrigerators Atlant series XM (2018–2023), pressing * turns on the function Super Freeze —intensive freezing, useful when loading a large amount of food. In older models (before 2015), this symbol could indicate Eco Mode a low-power mode, which slightly increases the temperature in the chambers to save energy.
To accurately determine the function of the star in your model, pay attention to combination with other indicators. For example, if after pressing * the snowflake ❄️ lights up, it is Super Freeze, and if all the lights go out, it is most likely activated Eco Mode. In refrigerators with a display (series New Wave), the asterisk can provide access to hidden settings, for example, adjusting the temperature in the freshness zone.
How to use the asterisk: step-by-step instructions
The algorithm for using the asterisk depends on the type of control of your refrigerator. Below are universal instructions suitable for most models Atlant (exceptions are refrigerators with a touch screen, for them see the next section).
1. Make sure that the refrigerator is connected to the network
2. Find the star (*) button on the control panel
3. Press once and wait 2-3 seconds
4. Pay attention to the indicators (lighted/extinguished/flashed)
5. If necessary, press again to cancel the mode-->
If nothing happens after pressing the star:
- 🔌 Check whether the refrigerator is plugged in (sometimes a reboot is required after a power outage).
- 🕒 Wait 5-10 minutes - in some models the mode change occurs with a delay.
- 📖 Check the instructions: in refrigerators Atlant series MHM the star can only work when the freezer door is closed cameras.
In models with mechanical control (rotary controls), the asterisk is usually located next to the thermostat. Here she plays the role of child lock or reset settings. To activate the function, you need to press and hold the button for 3-5 seconds until a sound signal.
Star on refrigerators Atlant with an electronic display
In modern models Atlant (series New Wave, Style, Integra) asterisk () is often used to access hidden settings or service menu. For example, in refrigerators with a display ATLANT XM 6025-031 the combination + "Frost" button opens the temperature calibration menu.
Deciphering the symbols on the display after pressing the asterisk:
| Symbol | Value | Action |
|---|---|---|
| ❄️ + * | Accelerated freezing (Super Freeze) |
Activated for 24 hours, then turns off automatically |
| * + 🌡️ | Manual temperature adjustment | Allows you to set the value in 0.5°C steps |
| Flashing * | Sensor error or compressor | Diagnostics required (see section "Faults") |
| * + ⚙️ | Reset settings to factory settings | Hold 10 seconds to confirm |
In refrigerators with touch controls (for example ATLANT XM 4426-080) the star can be hidden behind a long press on the display. To activate it:
- Touch and hold the upper right corner of the screen for 5 seconds.
- After the beep, it will appear. menu with the * symbol.
- Select the desired mode (usually available
Eco,PartyorHoliday).
What to do if the display does not respond to the asterisk?
If after pressing * the screen does not change, try:
1. Disable refrigerator from the mains for 1 minute, then turn it on again.
2. Check if the panel is locked (in some models, the lock is removed by holding the * + "Light" button).
3. Contact the service center - the control board may be faulty.
The difference between an asterisk and a snowflake: do not confuse it. modes
Many users confuse the asterisk (*) with snowflake (❄️), which is also found on the control panel Atlant. The difference between them is fundamental:
- ❄️ Snowflake is the main cooling mode. It shows the current temperature in the freezer and allows you to adjust it (usually from –16°C to –24°C).
- * Star is additional function, which modifies the operation of the snowflake. For example, when the snowflake is activated at -18°C, the star can temporarily lower the temperature to -26°C for fast freezing.
In refrigerators Atlant with system No Frost star and snowflake work together: the snowflake sets the base temperature, and the star turns on intensive air circulation for even cooling. In models with a drip system (for example, ATLANT MXM 2835-080), the asterisk can disable automatic defrosting, which is useful for long-term storage of food without opening the door.
Important! Simultaneously pressing a snowflake and an asterisk in some models leads to emergency shutdown of the compressor. This is done to protect equipment from overloads. If the refrigerator suddenly stops working after such a combination, do not panic: wait 10 minutes and turn it on again.
Common mistakes when using the sprocket and how to avoid them
Incorrect use asterisks can lead to overconsumption of electricity, spoilage of food or even breakage of the refrigerator. Here are the most common errors:
⚠️ Attention! If the asterisk blinks yellow or red for more than 30 minutes, this is a sign malfunction of the temperature sensor. Do not try to reset the error by pressing it multiple times: this may damage the control board. It’s better to disconnect the refrigerator from the network and call a technician.
- ❌ Continuous use of the mode
Super Freeze(asterisk + snowflake). This mode is intended for short-term freezing (maximum 24 hours). Long-term operation in this mode increases the load on the compressor and energy consumption by 30–40%. - ❌ Ignoring error signals. If, after pressing the asterisk, a beep is heard or the indicator flashes, this is not a “glitch”, but a warning about a problem (for example, an open door or a camera overload).
- ❌ DIY Repair. Attempt to fix a malfunctioning star button by disassembling the control panel often leads to loss of warranty. In 80% of cases, the problem is solved by a simple reset (unplugging for 10 minutes) or firmware update (for models with displays).
To avoid problems:
- Always read the instructions to a specific model - the functions of the asterisk may differ even within the same series.
- Do not press the asterisk during defrosting - this may disrupt the defrosting programs.
- If the refrigerator makes unusual sounds after activating the asterisk (for example, long humming of the compressor), immediately turn off the mode and check the ventilation.
The asterisk is blinking or not works: possible malfunctions
If the star on your refrigerator Atlant blinks, does not respond to pressing or behaves unusually, this may be a sign of both simple user errorand serious breakdown. Let's look at the main reasons:
| Symptom | Possible cause | Solution |
|---|---|---|
| The asterisk is blinking yellow | The freezer door is not closed tightly | Check the seal, restart the refrigerator |
| The asterisk is blinking red | Overheating of the compressor or malfunction of the sensor | Turn off the power for 1 hour, if this does not help, call a technician |
| The sprocket does not respond to pressing | Sticking of the button or oxidation of the contacts | Wipe panel with alcohol, if that doesn’t help, replace the button |
| The asterisk is constantly on | The mode is activated Holiday (vacation) |
Press * again or hold 5 seconds to cancel |
B refrigerators Atlant with electronic control (series Integra, Style), the blinking of the asterisk may indicate need to update the firmware. To do this:
- Disconnect the refrigerator from the network.
- Hold the * button and the
Lightbutton at the same time. - Connect the power - the message will appear on the display
UPDATE. - Follow the instructions on the screen (a USB drive with the firmware file may be required).
⚠️ Attention! If after updating the firmware the refrigerator stops turning on, this is a sign incompatibility of the software version. Do not try to repeat the procedure: contact the service center indicating the model and firmware version (it is indicated on the sticker inside the chamber).
In Atlant refrigerators produced in 2019–2022, the blinking green star may indicate activating Eco+ mode, which automatically lowers the temperature at night to save energy. This mode cannot be disabled through the control panel - only through the service menu (combination * + ⚙️, hold for 10 seconds).
Tips for optimal use of the star to save energy
The star on the refrigerator Atlant can become your assistant reducing electricity costsif used correctly. Here are some proven recommendations:
- 💡 Mode
Eco(star + snowflake): turn it on at night or when the refrigerator is less than 50% loaded. This reduces energy consumption by 15-20% without the risk of food spoilage. - ⏳ Mode
Holiday(star + "Light" button): activate it if you are leaving for 1-2 weeks. The refrigerator will maintain a minimum temperature (+10°C) sufficient to prevent mold. - ❄️🔥 Combination of star and sun (🌞): in some models (ATLANT XM 4021-000) this includes the "Winter Holiday" mode, which protects equipment from freezing at low indoor temperatures.
For maximum savings:
- Use star for short periods of intensive cooling (for example, after loading products), and then return to standard mode.
- Do not place the refrigerator next to heat sources (radiators, stove) - this causes the compressor to wear out, negating the effect of economical modes.
- Regularly defrost the refrigerator (even with the system
No Frost) - ice on the walls increases energy consumption by 25–30%.
In refrigerators Atlant with an inverter compressor (series Integra), the asterisk can activate adaptive mode, which automatically adjusts the cooling power to the load in the chambers. This allows you to save up to 30% of electricity per year, but requires correct initial setup (see the instructions for the model).
FAQ: Frequently asked questions about the star on the refrigerator Atlant
🔹 Why do you need an asterisk if there is a temperature regulator?
The asterisk does not replace the regulator, but supplements it. It allows you to temporarily change the operating mode of the refrigerator without resetting the main settings. For example, if you need to quickly freeze food, but don’t want to manually return the temperature back after a few hours, the asterisk will do this automatically (in the mode Super Freeze).
🔹 Why did the refrigerator become louder after pressing the asterisk?
This is normal: the asterisk activates increased operation of the compressor (for example, in Super Freezemode). The noise should decrease after 1-2 hours, when the temperature in the chamber stabilizes. If loud operation continues for more than 6 hours, check whether the freezer is overloaded (free space should be at least 20%).
🔹 Is it possible to turn off the blinking star?
Yes, but the method depends on the reason for the blinking:
- If it blinks yellow - close the door more tightly or check the seal.
- If flashing green this is an indication of the "Eco+" mode (can be turned off by holding the star for 5 seconds).
- If flashing red —diagnostics required (possible sensor or board malfunction).
In models with a display, blinking can be turned off in the menu Settings → Display → Off.
🔹 What to do if the star is stuck and cannot be pressed?
Try the following steps:
- Wipe the button with a cotton swab dipped in alcohol.
- Press the adjacent buttons - sometimes this “unlocks” stuck.
- Disconnect the refrigerator from the network for 10 minutes - this will reset the mechanical lock.
If this does not help, you need to replace the button or the entire control panel (at the service center).
🔹 Is there a difference between the asterisk on new and old models Atlant?
Yes, and it is significant:
- Old models (before 2015): the asterisk is usually responsible for
Eco Modeor child lock. - Modern models (after 2018): the asterisk controls
Super Freeze,Holidayor hidden settings. - Premium series (Integra, Style): the asterisk provides access to the service menu and sensor calibration.
To find out exactly function, check the instructions or find the model on the website Atlant by serial number (it is indicated on the sticker inside the chamber).