Adjusting the temperature in a Daewoo refrigerator: a step-by-step guide

Refrigerators Daewoo are known for their reliability and ease of control, but even with them, users have questions about setting temperature conditions. Incorrectly set parameters lead to overfreezing of products, increased energy consumption, or, conversely, insufficient cooling. In this article, we will look at how to correctly set the temperature in the refrigerator Daewoo —from mechanical models with a rotary dial to modern devices with an electronic display.

We will pay special attention to typical mistakes (for example, why ice forms in the freezer, and it is too warm in the main chamber), and we will also give recommendations on optimal modes for different conditions - from hot summer to cold winter. If your refrigerator Daewoo behaves unusually after changing the settings, you will also find ways to diagnose problems here.

Types of temperature control in Daewoo refrigerators

Before setting it up, it is important to determine which control system is used in your model. The algorithm of actions depends on this. Refrigerators Daewoo are divided into three main categories:

• 🔄 Mechanical control —adjustment is carried out by a rotary switch (more often found in models Daewoo FR-094, FR-120 and similar ones).
• 📱 Electronic control with buttons —adjustment via touch or physical buttons on the panel (for example, Daewoo FRS-U20I7).
• 🖥️ Electronic control with display —modern models with digital temperature display (Daewoo FDN-2201, FDN-3001).

You can find out the type of control by the appearance of the panel: if there is a screen, you have the third type, if only buttons without numbers - the second, and if one or two rotary controls - the first. In mechanical models, the temperature is set indirectly (by turning the knob in divisions from 1 to 7), in electronic models - directly (indicating exact degrees).

Optimal temperature conditions for Daewoo

The manufacturer recommends maintaining the following temperature ranges in the refrigerator: Daewoo following temperature ranges:

• ❄️ Freezer compartment: from -18°C to -24°C (optimal -18°C for long-term storage).
• 🥦 Main camera: from +2°C to +6°C (ideal +4°C for most products).
• 🥛 Freshness zone (if available): from 0°C to +2°C (for meat, fish, dairy products).

Important: these values can be adjusted depending on:

• 🌡️ Room temperatures —in hot weather, the refrigerator works more intensely; in winter, you can reduce the power.
• 📦 Chamber loads —a full refrigerator cools more slowly.
• 🔌 Door opening frequencies —frequent openings require a lower temperature.

How to set the temperature in mechanical Daewoo models

Mechanical refrigerators Daewoo (for example, series FR or FRS) are adjusted using a rotary switch, usually located inside the main camera on the top panel or on the side. It has a scale with numbers from 1 to 7 (less often to 5), Where:

• 1 — minimum cooling (highest temperature).
• 7 —maximum cooling (lowest temperature).

Setting algorithm:

1. Determine the current position of the regulator (usually factory setting — 3 or 4).
2. Turn the knob one division in the desired direction:
   • 🔴 If the refrigerator is too warm - increase the value (for example, from 3 to 4).
   • 🔵 If the products freeze slightly —reduce the value (for example, from 5 to 4).

Wait 6–12 hours —during this time the temperature will stabilize.

Check the result with a thermometer (put it in a glass of water on the middle shelf).

Make sure the door is tightly closed|Turn the dial 1 notch|Wait 6-12 hours|Measure the temperature with a thermometer|If necessary, adjust another 1 notch-->

In mechanical Daewoo models, the freezer regulator is often separate! If you have a two-chamber refrigerator, look for a second switch (usually in the freezer or on the same panel, but marked “Freezer”).

⚠️ Attention: In some older models Daewoo (before 2010), the scale the regulator may be reversed - 1 corresponds to maximum cold. Check this in the instructions for your model!

Temperature settings in Daewoo electronic models

Electronic refrigerators Daewoo (for example, FDN-2201, FRS-U20I7) allow you to set the temperature with an accuracy of a degree. The interface may differ, but the general principle is the same:

1. Find the control panel - it is located on the top of the door or inside the chamber.
2. Press the button Temp (or Fridge for the main camera, Freezer for the freezer).
3. Use the buttons +/– or touch arrows to set the desired value.
   • For the main camera: from +2°C to +8°C.
   • For the freezer: from -16°C to -26°C.

Confirm the selection (if required) with the button OK or Set.

Wait for a signal (sound or light) confirming saving settings.

In models with a display, the current temperature is constantly displayed. If the screen does not show degrees, press the button Display or Info to activate the display.

How to reset the temperature settings to factory settings?

In Most electronic models Daewoo to reset, hold down the button Temp (or Set) for 5-10 seconds until a long signal is heard, after which the refrigerator will return to standard values: +4°C in the main chamber and -18°C in the freezer.

Example path in the menu for the model Daewoo FDN-3001:

Settings → Temperature → Main camera → Set +4°C → Save
Settings → Temperature → Freezer → Set -18°C → Save

⚠️ Attention: In refrigerators Daewoo with function No Frost After changing the temperature, enhanced cooling may start for 1-2 hours. This is normal and does not require intervention!

Common mistakes when setting the temperature

Even experienced users sometimes make mistakes that lead to the refrigerator not working properly. Here are the most common of them:

• 🌡️ Ignoring the external temperature - in hot weather the refrigerator needs to be cooled more strongly, and in winter (for example, at the dacha) you can reduce the power.
• 🚪 Frequent opening of doors - every time you open the temperature inside rises by 2–4°C, and the compressor is forced to work longer.
• 🥶 Setting the maximum cold without necessity - this increases energy consumption and can lead to icing of the evaporator.
• 📉 Sudden temperature changes - if you turn the regulator from 2 at 7 at one time, the compressor will receive excessive load.

Another typical problem is uneven cooling. If one corner of the refrigerator Daewoo is too cold and the other is warm, check:

• The location of the food - whether it is blocking the ventilation holes.
• The tightness of the door - possibly a seal worn out.
• Fan operation (in models with No Frost) - if it does not spin, repair is required.

What to do if the temperature does not hold?

If, after setting, the temperature in the refrigerator Daewoo "floats" or does not correspond to the set values, follow these steps:

1. Check the door seal:
   • Close the door and try to insert a sheet of paper between it and the body.
   • If the sheet is easily pulled out, the seal requires replacement.
2. Clean the condenser (grid on the back wall):
   • Disconnect the refrigerator from the power supply.
   • Use a vacuum cleaner or brush to remove dust from the grille.
   • Check if anything is blocking the air circulation around the refrigerator (the distance to the wall should be at least 5 cm).

Diagnose the compressor:

• Normally, it should turn on for 10–20 minutes and turn off for 30–40 minutes.
• If the compressor runs without stopping or, conversely, hardly turns on, service is required.

In models with No Frost the cause of the unstable temperature may be a faulty fan or defrost heater. If after cleaning and checking the seal, the problem remains, contact your service provider. service center Daewoo —self-repair of electronic components can cause damage.

⚠️ Attention: If the refrigerator Daewoo after changing the temperature begins to make unusual sounds (humming, clicking, crackling), immediately return to the previous settings and disconnect it from the network for 1 hour. This may indicate. compressor overload!

Tips for operating Daewoo refrigerators

In order for the refrigerator Daewoo to work efficiently and for a long time, follow these recommendations:

• 🧊 Defrosting:
  • For models with a drip system —defrost 1-2 times per year.
  • For No Frost —it is enough to wipe the walls from condensation once every 6 months.
• 📦 Distribution of food:
  • Do not place hot dishes - let them cool to room temperature temperature.
  • Do not fill the shelves to capacity - leave gaps for air circulation.
• 🔌 Energy saving:
  • Install the refrigerator away from the stove, radiator or direct sunlight.
  • Regularly clean the back dust grill (every 3-6 months).

If your refrigerator Daewoo is equipped with the "Super Cool" or "Super Freeze"function, use it only when necessary (for example, after loading a large amount of food. Constant operation in this mode shortens the service life). compressor.

FAQ: Frequently asked questions about setting the temperature in Daewoo

How to reset the temperature settings if the Daewoo refrigerator began to work incorrectly?

In most electronic models, to reset, hold the button Temp or Set 5-10 seconds until the sound signal. In mechanical models, simply return the regulator to position 3 (medium). If this does not help, unplug the refrigerator for 10-15 minutes, then turn it on again.

Why does too much ice form in the Daewoo freezer, although the temperature is set correctly?

This could be the case. caused by:

1. System malfunction No Frost (if any) - replacement of the defrost heater or sensor is required.
2. Frequent opening of the freezer door - warm air condenses and freezes.
3. Damage to the seal - check its density.

In mechanical models without No Frost ice is normal, regular defrosting is required.

Is it possible to set different temperatures in the upper and lower parts of the main chamber?

In most models Daewoo The temperature in the main chamber is controlled centrally, but there are exceptions:

• In refrigerators with multi-flow system (for example, Daewoo FDN-3001) you can configure zones separately.
• In models with freshness zone it has its own temperature regime (0...+2°C).

If your refrigerator does not support separate adjustment, use the shelves for their intended purpose: the lower ones are for the most perishable products (it’s colder there).

How to check if the thermostat in a Daewoo refrigerator is working correctly?

To diagnose the thermostat:

1. Unplug the refrigerator.
2. Remove all the food and let it stand turned off for 1-2 hours.
3. Turn on the refrigerator at minimum cooling mode (1 or +6°C).
4. Place the thermometer in a glass of water on the middle shelf.
5. After 6-8 hours, check the readings. If the temperature does not correspond to the set temperature (for example, +10°C instead +6°C), the thermostat is faulty.

Do you need to change the temperature settings in winter and summer?

Yes, seasonal adjustment helps save energy and extend the life of the refrigerator:

• Summer (above +25°C in indoors): reduce the temperature by 1–2°C (for example, from +4°C to +2°C).
• Winter (below +16°C indoors): increase the temperature by 1–2°C (for example, from +4°C before +5°C).

No changes can be made in the freezer if it is less than 50% full.