Weight of a two-meter refrigerator: from 90 to 200 kg depending on the model

When it comes to buying or moving with a two-meter refrigerator, the first question is occurs: how much it weighs? This parameter is critical not only for choosing a suitable model, but also for logistics - from the lifting capacity of the elevator to the number of loaders. Two-meter refrigerators (usually high 170–210 cm) belong to the class Side-by-Side or French Door, and their weight can vary from 90 kg for compact models up to 200+ kg for premium options with an ice maker and inverter compressors.

In this article we will figure out what weight depends on, provide accurate data on popular brands (Samsung, LG, Bosch, Indesit), and also give practical advice on transportation and installation. If you are planning a purchase or are already faced with the need to move large equipment, here you will find answers to all key questions.

Why is the weight of a two-meter refrigerator so important?

The weight of the refrigerator affects several critical aspects:

• 🏠 Floor strength: Standard floor slabs can withstand 150–200 kg/m², but the point load from the legs of the refrigerator may exceed permissible standards, especially in old houses.
• 🚪 Elevator lifting capacity: In apartment buildings, elevators are often designed for 300–400 kg, but taking into account the weight of the loaders and the trolley, there is not much “reserve” left.
• 🚛 Delivery cost: Courier services charge an additional fee for equipment weighing over 80 kg, and for models >150 kg, special transport may be required.
• 🔧 Installation complexity: Refrigerators weighing >120 kg are almost impossible to move alone - you will need at least 2-3 people or professional movers.

In addition, the weight indirectly indicates assembly quality and packaging. For example, models with double walls, metal shelves and additional thermal insulation will be heavier than their “lightweight” counterparts, but will also last longer. We will talk about this in more detail in the next section.

What determines the weight of a two-meter refrigerator?

The mass of a refrigerator is formed from several key components. Let's consider them in descending order of influence:

1. Compressor type: Inverter models (for example, in Samsung RB7300) weigh 10–15 kg more than linear ones due to the massive motor and cooling system.
2. Case material: Refrigerators with stainless steel (premium segment) are heavier than plastic ones by 15–25 kg.
3. Number of chambers: Side-by-Side with 4–5 cooling zones (for example, LG GC-B247JLVL) will be heavier than classic two-chamber ones by 20–30 kg.
4. Additional functions: The ice maker adds 5–8 kg, the system No Frost - more 3–5 kg due to the fans.
5. Thermal insulation thickness: In models with energy consumption class A+++ the insulation layer is thicker, which increases the weight by 5–10 kg.

It is interesting that refrigerator volume (for example, 500 l vs 600 l) affects weight much less than it seems. The difference between models of the same brand with similar capacity rarely exceeds 10–15 kg. Much more important design features for example, refrigerators with French door (French Door) are usually heavier Side-by-Side of the same height due to the more massive upper section.

Why are refrigerators with No Frost heavier?

The No Frost system assumes the presence of fans, evaporators and additional air ducts, which increase the overall weight. In addition, to maintain uniform air circulation, a more powerful compressor is required, which also adds weight.

Weight of two-meter refrigerators by brand: comparison table

Below is an updated table of the weight of popular models with a height 170–210 cm. Data is based on official manufacturer specifications (as of last catalog update). Please note that the weight may vary slightly depending on the configuration (for example, the presence of a water dispenser).

As can be seen from the table, even among refrigerators of similar height, the weight variation reaches 50 kg. For example, Indesit BIAA 24 weighs only 90 kg, while Haier HRF-628IG7 - already weighs 140 kg. This is due to a different approach to design: Indesit saves on materials (plastic shelves, thin insulation), and Haier focuses on premium functions.

⚠️ Attention: The weight in the table is for empty refrigerator. When filling with food (especially if you store heavy cans in the lower drawers), the total weight may increase by 20–40 kg. Take this into account when calculating the load on the floor!

How to properly weigh a refrigerator without scales?

If you need to know the exact weight of your model, but there are no industrial scales at hand, you can use one of the proven methods:

• 📏 Calculation by dimensions: Multiply the length, width and height of the refrigerator (in meters), then multiply by 500–700 kg/m³ (average density of household appliances). For example, for the model 1.8 × 0.9 × 0.7 m: 1.8 × 0.9 × 0.7 × 600 ≈ 680 kg/m³ → 68 × 1.8 ≈ 122 kg.
• 🚗 Automotive scales: Place the refrigerator on a trailer or in the trunk of a car, then weigh the car before and after loading (the difference will be the weight of the equipment).
• 🏋️ Comparison with a known load: If the refrigerator can be slightly raised, compare it with bags of cement (50 kg), weights or other standards.
• 📄 Documentation: Weight is always indicated in product passport or on the sticker on the back (look for the inscriptions "Net Weight" or "Net weight").

For maximum accuracy, we recommend combining methods. For example, first calculate the weight based on the dimensions, then check the documentation. If the data differs greatly (by more than 10–15 kg), this may indicate assembly defect (for example, extra metal parts inside) or model modification (some manufacturers update the package without changing the name).

Moving a two-meter refrigerator: instructions and errors

Moving a refrigerator with weight 100+ kg is a task that requires preparation. Here is a step-by-step algorithm that will help avoid damage to equipment and injuries:

Unplug the refrigerator 12 hours before moving|Remove all food and shelves (the weight of an empty refrigerator is easier to control)|Secure the doors with tape or straps|Prepare a cart or sled for moving|Check the route for narrow areas openings and turns -->

The most common mistakes during transportation:

1. Transportation lying on its side: This disrupts the operation of the compressor and can lead to freon leakage. The refrigerator must be transported strictly vertically (permissible tilt angle - no more than 40°).
2. Ignoring the weight: If the elevator is designed for 300 kgand the refrigerator weighs 150 kg, do not forget to add the weight of the movers (70–90 kg per person) and the cart (10–15 kg).
3. Sharp ones. movement: When moving up stairs, do not pull the refrigerator by the door - this may damage the hinges. Use carrying straps or special grips.
4. Failure to comply with the temperature regime: If the refrigerator is transported in winter, before turning it on you need to keep it in a warm room 4–6 hours (to equalize the pressure in the system).

For models weighing >150 kg we recommend ordering professional delivery. The cost of the service starts from 3,000 rubles (depending on the floor and the availability of an elevator), but this guarantees the safety of the equipment. If you decide to do it yourself, be sure to use special carrying tapes (you can buy them at hardware stores) and protective covers to prevent scratches.

⚠️ Attention: When transporting refrigerators with ice maker or water dispenser it is necessary to drain all liquid from the system and turn off the water supply (if the connection is stationary). Otherwise, tilting may occur. data-i="226">ice maker short circuit!

How to reduce the weight of the refrigerator before moving?

If your refrigerator weighs 180+ kgand this creates problems with transportation, you can temporarily reduce its weight by 10–20 kg. To do this:

• 🧊 Remove all removable elements: shelves, drawers, door compartments (they can be transported separately). by 1.5–2.5 kg each.
• ❄️ Defrost the freezer compartment: Ice and frost can add up to 5–10 kg extra weight. Use a hair dryer or special scrapers. to speed up the process.
• 🔧 Remove the back cover: In some models, heavy metal parts are hidden under it (for example, counterweights for doors). Attention: this is only permissible if you do not damage the system cooling!
• 💧 Drain the water from the drain systems: Up to 1–2 l liquid may accumulate in the pan and tubes (≈1 kg).

Do not attempt to dismantle the compressor or other critical parts - this may lead to loss of warranty i breakdownIf weight is still a problem, consider. option lift rental (cost - from 5,000 rubles depending on the region).

What to do if the refrigerator is too heavy for your floor?

B in old houses (especially with wooden floors) or in apartments with laminate on a weak screed the weight of the refrigerator can become a serious problem. Here are some solutions: Laminate on a weak screed: Place wide metal plates under the legs of the refrigerator (for example, this). will increase the support area and reduce the pressure on the floor.

1. Distribute the load: Place wide metal plates (such as 30×30 cm). This will increase the support area and reduce pressure on the floor.
2. Strengthen the floor: In the place where the refrigerator is installed, you can lay an additional layer of plywood (18–22 mm) or OSB board, securing it with screws to base.
3. Move the refrigerator closer to the load-bearing wall: The load on the floor will be distributed more evenly.
4. Choose a model with less weight: For example, instead LG GC-B247JLVL (135 kg) consider Bosch KAN92VI30R (98 kg) - the difference in 37 kg can be critical.

If you live in a private house, check the condition of the foundation under the kitchen. In some cases, it may be necessary to strengthen the supports or even pour an additional slab. To accurately assess the risks, we recommend consulting with an engineer.

⚠️ Attention: In apartment buildings with problematic floors (cracks, deflections), installation of a refrigerator weighing >150 kg may be prohibited by the management company. Check this in advance to avoid fines!

FAQ: Frequently asked questions about the weight of two-meter refrigerators

Is it possible to transport a refrigerator in a horizontal position?

No, this is strictly not recommended. The refrigerator compressor is mounted on springs, and when transported lying down, oil can leak out of it. get into the cooling circuit, which will lead to breakage. data-i="299">special fastenings after switching on. The permissible tilt angle is up to 40°. If you need to transport the refrigerator in a car with a low ceiling, use special fasteningsto hold it vertically.

Which refrigerator is heavier: Side-by-Side or French Door?

As a rule, models French Door heavier Side-by-Side of the same height by 10–20 kg. This is due to a more massive upper section (two doors instead of one) and additional mechanisms for synchronous opening. For example, Samsung RF23A9671SG (French Door, 145 kg) vs Samsung RS62R5001M9 (Side-by-Side, 120 kg).

How many people needed to carry a refrigerator weighing 150 kg?

To safely carry a refrigerator weighing 150 kg you will need 3 people (one on each side and one for insurance). If the stairs are narrow or there are turns, it is better to order professional loaders with a winch trolley. unevenly: for example, for models with an ice maker, the center of gravity is shifted towards the freezer compartment.

Does the weight of the refrigerator affect its energy consumption?

Indirectly - yes. usually have thick thermal insulation and powerful compressors, which can both reduce and increase energy consumption. For example, LG GC-B247JLVL (135 kg) belongs to the class A+++ and consumes 350 kWh/year, while lightweight Indesit BIAA 24 (90 kg) has a class B and consumes 420 kWh/year.

Is it possible to install a refrigerator weighing 200 kg on the second floor of a wooden house?

Theoretically, yes, but with reservations. Wooden floors must be reinforced additional beams or supports under the installation site. We recommend:

1. Consult with an engineer to calculate the load.
2. Place the refrigerator as close as possible to the load-bearing wall.
3. Use vibration-isolating pads under the legs to reduce dynamic load.

If the house is older 30 years, it is better to choose a lighter model or install a refrigerator on the ground floor.