Push Cool in an Indesit refrigerator: why is this function needed and how to use it

You opened the refrigerator Indesitto put in fresh food, and noticed a button or an inscription Push Cool —but don’t know what it means? This function is available in many modern models of the brand, but not all users understand its purpose. Unlike standard cooling modes, Push Cool works on a special principle, helping to quickly reduce the temperature in the chamber if necessary.

In this article we will look in detail at what it is Push Cool, how it affects the operation of the refrigerator, and in what situations it should be used. You will learn how this function differs from Super Cool or Fast Freeze, which models Indesit support it, and how to use it correctly so as not to harm the equipment. We will also answer frequently asked questions, for example, is it possible to leave Push Cool enabled on a permanent basis.

If you have just bought a refrigerator Indesit with this function or have been using it for a long time, but do not fully understand its operation, the material will be useful. We have collected all the relevant information, including technical nuances and practical tips, so that you can use Push Cool with maximum efficiency.

What is Push Cool: a simple explanation

Push Cool is an accelerated cooling mode in the refrigerator compartment, which temporarily reduces the temperature to minimum values (usually +2...+4°C). Its main task is to quickly cool a large number of products, for example, after shopping in a supermarket or preparing dishes.

Unlike the standard mode, where the temperature is maintained at a level +5...+7°C, Push Cool forces the compressor to work harder, but not constantly. Typically, the function automatically turns off after 6–12 hours (depending on the model) so as not to overload the system.

It is important to understand that this is not the same as Super Cool (which is often found in refrigerators Samsung or LG). Push Cool v Indesit softer - it does not freeze products, but simply accelerates their cooling to a safe storage temperature.

• 🔹 Main purpose: rapid cooling of fresh products (meat, fish, dairy products).
• 🔹 Duration of operation: from 6 to 12 hours (automatic shutdown).
• 🔹 Temperature range: +2...+4°C (versus standard +5...+7°C).
• 🔹 Energy consumption: temporary increases by 10–15%.

The function is especially useful in the summer, when food spoils quickly, or if you often load warm dishes into the refrigerator (for example, soup or a pot of compote). However Push Cool is not intended for freezing - there is a separate one for this. mode Fast Freeze in the freezer.

How Push Cool works: technical details

When activated Push Cool in the refrigerator Indesit the following processes occur:

1. Increased operation of the compressor. It starts working with fewer pauses to quickly reduce temperature.
2. Change in air circulation. Fans (if they are in the model) switch to intensive mode, evenly distributing the cold.
3. Temporary disabling of defrosting. System No Frost (if present) pauses automatic defrosting so as not to waste energy on heating.
4. Sensor control. Temperature sensors read indicators more often to avoid overcooling.

Important: Push Cool does not turn on simultaneously with Fast Freeze (if your model has it). The refrigerator prioritizes cooling of the chamber where the mode was last activated.

In models with electronic control (for example, Indesit ITF 118 or Indesit BIAA 13), the function is activated by a button on the panel. In mechanical refrigerators (for example, Indesit TS 116) it may not be available - there the temperature is adjusted manually.

In what cases should you use Push Cool

The function is not intended for permanent use - it temporarily creates extreme conditions for rapid cooling. Here are typical situations when it should be turned on:

• 🛒 After large purchases. If you brought home a lot of perishable products (meat, fish, dairy products), the mode will help quickly reduce their temperature to a safe one.
• ☀️ In hot weather. In summer, the refrigerator works more intensely, and Push Cool will help compensate for the heat load when opening the door frequently.
• 🍲 After preparing dishes. If you put warm soup, compote or a main course in the refrigerator, the mode will speed up their cooling and prevent spoilage.
• 🎉 Before the feast. If you plan to load the refrigerator with a large amount of food (for example, before a holiday), turn on Push Cool in advance.

However, there are cases when the function use not recommended:

• ❄️ If there are already products in the refrigerator compartment that are sensitive to low temperatures (for example, tropical fruits or some vegetables).
• ⚡ In case of power outages - a sudden shutdown during operation Push Cool may cause a failure in the system.
• ⏳ If you do not plan to load new products, constant use of the mode increases wear on the compressor.

What will happen if you leave Push Cool on for a long time?

Long-term operation in this mode (more than 24 hours) can lead to:

- compressor overload and premature wear;

- evaporator freezing (even in models with No Frost);

- increased energy consumption (up to 20% above normal).

In most refrigerators Indesit the function is disabled automatically, but in older models it must be deactivated manually.

How to enable and disable Push Cool in the Indesit refrigerator

The activation process depends on the type of control of your model:

Electronic control (touch panel or). buttons)

In refrigerators with a display (for example, Indesit BIAA 13 or Indesit ITF 118), the function is activated as follows:

1. Find a button with the inscription Push Cool or a snowflake icon with an arrow.
2. Press it once - the indicator will light up on the display (usually blue or green).
3. To turn it off, press the same button again or wait until it turns off automatically (after 6-12 hours).

In some models (for example, Indesit EWT 81052), the function can be activated by holding the button Temp for 3 seconds.

Mechanical control (rotary controls)

In refrigerators with a mechanical thermostat (for example Indesit TS 116) there may not be a separate button. Instead: Push Cool may not be. Instead:

1. Turn the temperature control to the maximum value (usually position 5 or MAX).
2. Wait 1-2 hours - this simulates the effect of accelerated cooling.
3. Return the control to normal position (2–3) after loading food.

Please note: mechanical models do not have an automatic shutdown, so keep an eye on the time yourself.

Make sure the refrigerator door is tightly closed|

Check that there are no foods on the shelves that could freeze (bananas, cucumbers, mayonnaise)|

If Fast Freeze is turned on in the freezer, turn it off - two modes will not work at the same time|

After loading the products, do not open the door unnecessarily for 1-2 hours-->

Push Cool vs Super Cool vs Fast Freeze: what difference

Many people confuse Push Cool with other accelerated cooling modes. Let's look at the key differences:

Super Cool (found in refrigerators Bosch, Samsung) is more aggressive - it can cool up to 0°C, which is suitable for quickly cooling drinks or semi-finished products. Push Cool in Indesit softer and safer for most products.

Fast Freeze is intended exclusively for the freezer. It lowers the temperature to -24...-30°Cto quickly freeze fresh foods (berries, meat, vegetables) without loss of quality. These two modes (Push Cool and Fast Freeze) can be turned on simultaneously, but the refrigerator will prioritize the one that was activated. later.

Common mistakes when using Push. Cool

Even such a simple function can cause problems if used incorrectly. Here are the most common errors and their consequences:

• ❌ Continuous use of the mode. Some owners turn on Push Cool and forget to turn it off, which leads to:
• —increased energy consumption (up to +20% of normal consumption);
• —freezing of the rear wall (even in models with No Frost);
• —accelerated wear of the compressor.
• ❌ Turning on without need. If there are few products in the refrigerator or they are already cold, the mode will only waste electricity.
• ❌ Ignoring signals. In some models, during prolonged operation Push Cool a sound signal is heard or the indicator flashes - this is a sign that it is time to turn off the function.
• ❌ Simultaneous use with Fast Freeze. The refrigerator cannot effectively cool both chambers - one of the functions will work at half capacity.

⚠️ Attention: If, after turning off Push Cool the refrigerator continues to make a lot of noise or does not cool to normal temperature, this may indicate a malfunction of the thermostat or compressor. In this case, it is recommended to call a specialist.

Another common mistake is placing food too close to the ventilation holes (if the model has them). In Push Cool the flow of cold air increases, and sensitive products (for example, greens or mayonnaise) may freeze.

Indesit models with the Push Cool function: how to find out if it is in your refrigerator

The function Push Cool is not present in all refrigerators IndesitHere's how to check its presence:

1. Look at the control panel. If there is a button with the inscription Push Cool or a snowflake icon with an arrow, the function is supported.
2. Examine instructions. In the "Functions" or "Operating Modes" section there should be a mention Push Cool.
3. Check the model on the Internet. On the website Indesit or in the reviews you can find technical specifications.

Here are several popular models Indesit with this function:

• 🔹 Indesit BIAA 13 —a two-chamber refrigerator with electronic control and No Frost.
• 🔹 Indesit ITF 118 —a model with a display and a freshness zone.
• 🔹 Indesit EWT 81052 —a compact refrigerator with a function Push Cool and Fast Freeze.
• 🔹 Indesit DIA 16 —a model with a system Total No Frost and accelerated cooling.

If your model is not included in this list, this does not mean that the function is not present. For example, in the series Indesit TS (mechanical control), accelerated cooling can be simulated by turning the thermostat to maximum.

⚠️ Attention: In some models Indesit after 2022, the function Push Cool may be called Quick Cool or Turbo Cool. Specify the name in the instructions.

FAQ: Answers to common questions questions about Push Cool

Is it possible to leave Push Cool on all night?

It is not recommended. The maximum duration of the function is 12 hours (in most models it turns off automatically). If you leave it for a longer period, this will lead to increased energy consumption and the risk of freezing of the evaporator. The exception is when you put it in the refrigerator. a large amount of warm food (for example, after cooking for several days).

Why does the refrigerator not cool as usual after Push Cool?

This may be due to:

• — temporary overload of the compressor (wait 1-2 hours, the temperature will normalize);
• — freezing of the evaporator (if the model does not have No Frost, defrosting is required);
• — malfunction of the thermostat or sensor (needs repair).

If the problem does not disappear, check if the door is tightly closed and if there is ice on the back wall.

Is it possible to use Push Cool to cool drinks?

It is possible, but it is ineffective. The mode reduces the temperature to +2...+4°C, which is not enough to quickly cool, for example, beer or soda to an ice-cold state. For this it is better to:

• - use. mode Super Cool (if available in the model);
• — place drinks in the freezer for 15–20 minutes (but don’t forget!);
• — buy a refrigerator with a zone Cool Box (special compartment for quick cooling).

How often can you use Push Cool?

The function can be turned on as needed, but not more than 2-3 times a week. Constant use will increase wear on the compressor and energy consumption. Optimal cases:

• - after large purchases;
• - in hot weather (at room temperature). above +25°C);
• —before the feast (3-4 hours before loading the products).

Is there a Push Cool in the freezer?

No, the freezer uses another function - Fast FreezeIt is designed for quick freezing of food. temperature -24...-30°C. Push Cool works only in the refrigerator compartment.