Where to buy a relay for the Stinol refrigerator: official suppliers and proven methods

When a refrigerator Stinol stops turning on or makes suspicious clicks, in 80% of cases the start-up relay is to blame. This small part is responsible for starting the compressor, and its failure paralyzes the operation of the entire unit. But where to buy an original relay for refrigerators Stinol models 100, 101, 103 or 107, so as not to run into a Chinese counterfeit or a used spare part with a dubious history? In this article, we will look at all legal methods of purchase - from official dealers to trusted online sites, and also tell you how to distinguish a high-quality relay from a counterfeit one.

It is important to understand: relays for Stinol are different from analogues for Atlanta or Indesita not only externally, but also internally. For example, models RTK-X and RTP-1 are visually similar, but have different current characteristics. Installing the wrong relay can lead to overheating of the compressor or complete failure. Therefore, buying the “first thing you come across” on the market is a risky decision.

We analyzed reviews from repairmen, studied market offers and compiled a rating of reliable purchasing methods. We have also prepared a checklist that will help you avoid mistakes when choosing.

1. Official Stinol dealers: where to find and how to order

The most reliable, but not always the fastest way is purchasing from an official supplier. The company Stinol (now part of the group Indesit Company) has a network of authorized service centers and distributors where they sell original spare parts. However, there are nuances here:

  • 📍 Geography: In small towns there may not be official dealers - you will have to order with delivery.
  • Terms: Delivery takes from 3 to 14 days (depending on stock availability).
  • 💰 Price: The original relay will cost 1,200–2,500 rubles (depending on the model).

To find the nearest dealer:

  1. Go to the website Indesit Company (section “Service and support”)
  2. Enter the refrigerator model in the search (for example, Stinol 107).
  3. Select the "Spare parts" or "Service centers" tab.
⚠️ Attention: Not all dealers may be listed on the site. If there are no official points in your region, try calling the service center on the hotline - sometimes they sell spare parts directly.

The advantage of buying from a dealer is a warranty on the part (usually 6-12 months) and the ability to return a defective relay. But be prepared to present the passport of the refrigerator or its serial number - without this they may refuse to sell.

2 Online spare parts stores: TOP 5 verified ones. sites

If you don’t have time to wait for delivery from the dealer, you can order a relay in specialized online stores. We have selected 5 sites with a good reputation and real reviews:

Store Average price of a relay Delivery time Pros Cons
Spare parts-MSK 900–1 800 ₽ 2–5 days Wide range, there are rare models Expensive delivery to the regions
220 Volt 1 100–2 200 ₽ 3–7 days Official partner Indesit, 1 year warranty Prices above average
Cold 800–1 600 ₽ 1–3 days (Moscow time) Fast delivery, pickup Small assortment for old models
RemBytTech 700–1 500 ₽ 2–10 days Low prices, frequent discounts No online consultant
Zap-Online 950–1 900 ₽ 3–14 days There are spare parts for Stinol 90s Long order processing

Before purchasing, be sure to check:

  • 🔍 Relay article number (for example, RTP-1-15 or RTK-X-13).
  • 📦 Complete package —some stores sell relays without mounts.
  • 🔄 Return conditions —if the part does not fit, can it be exchanged.
📊 Where do you usually buy spare parts for equipment?
In the official service
In online stores
On the market/in retail stores
From familiar craftsmen

3. Marketplaces: AliExpress, Wildberries and Ozon - is it worth the risk?

On sites like AliExpress, Wildberries or Ozon relays for Stinol can be found cheaper - from 400 to 1,200 rubles. But here there is a high risk of running into:

  • 🔄 Fakes branded Stinol (they often sell universal relays with sticker).
  • Used spare partspassed off as new.
  • 📦 Model mismatch (in the description Stinol 107, but the part comes from Atlanta).

If you still decide to buy on the marketplace, follow the rules:

Study reviews (especially with photos)

Check the seller's rating (not lower 4.7)

Ask the seller for a certificate for the product

Compare the photo with the original relay (see below)

Pay only after checking the parcel-->

Original relay Stinol has:

  • 🏷️ Sticker with logo Indesit Company (not just “Stinol").
  • 🔢 Serial number that matches the article in the catalog.
  • 🔧 Metal case (fakes often have plastic).
⚠️ Attention: On AliExpress they often sell “universal” relays like WJ118-1A or 3TS-15, which are “suitable for all refrigerators.” This is a deception - such parts are not designed for use. current loads of compressors Stinol and will burn out in 1-2 months.

4. Markets and stores of radio components: where to look offline

If you need a relay urgently and don’t have time to wait for delivery, you can try to find it in offline stores. Where to look:

  • 🏢 Stores of spare parts for refrigerators: In large cities there are specialized points (for example, "Holod-Service" in Moscow or "TechnoZapchast" in St. Petersburg).
  • 🛒 Radio components markets: On "Mitinsky" (Moscow) or "Sennom" (St. Petersburg) often sells used and new relays.
  • 🔧 Refrigerator repair shops: Some craftsmen sell spare parts from the warehouse.

Advantages offline purchases:

  • ✅ You can immediately check the part (inspect, “call” with a tester).
  • ✅ There is no risk of losing the package.
  • ✅ Sometimes you can bargain (especially in the markets).

But there are also underwater stones:

  • 🚫 Prices may be inflated (in offline stores there is a 20-30 markup).
  • 🔍 It is difficult to find relays for older models (for example, Stinol 100 1990s).
  • 📄 Often there is no receipt or guarantee.

5. How to distinguish an original relay from a fake: 5 signs

Fake relays are almost indistinguishable from the original ones in appearance, but have critical flaws: weak contacts, poor-quality insulation and incorrect current characteristics. Here's how to recognize them:

  1. Weight: The original relay weighs 150-200 g (for fakes - 80-120 g due to thin metal).
  2. Marking: The original has an article number engraved on it (for example, RTK-X-13A), and the piece of paper is not pasted.
  3. Case: The branded relays have a cast body, without gaps. Counterfeits are often assembled from two halves glued together inaccurately.
  4. Contacts: The original uses copper contacts, while the counterfeits use steel or tinned contacts.
  5. Packaging: Stinol/Indesit pack the relay in cardboard boxes with logo. Counterfeits are often sold in plastic bags.

A critical sign of a counterfeit: if the relay says “Made in China” without indicating the manufacturer, it is 100% counterfeit. Original relays for Stinol are produced in Russia or Italy.

Check the relay with a tester before installation:

  1. Put the multimeter in the "test" mode.
  2. Touch the contacts with the probes 1–2 (normal resistance: 20–50 Ohms).
  3. Check the contacts 3–4 —the resistance should be infinite (open circuit).
What will happen if you install a fake relay?

Fake relays often cannot withstand compressor starting currents Stinol (up to 10–12 A). This leads to:

- Overheating and sintering of contacts (the relay “sticks” in the “on” position).

- Overload of the compressor and its failure (repair cost - from 5,000 ₽).

- Fire hazardous situation (in rare cases, the relay may smoke).

6. How much does a relay cost for Stinol: price comparison and where is it cheaper

The cost of a relay depends on the model of the refrigerator, the type of relay and the place of purchase. Below is a comparative table of prices for popular models:

Relay model Suitable for refrigerators Price from the dealer (₽) Price in the online store (₽) Price on the marketplace (₽)
RTK-X-13 Stinol 101, 103 1 800–2 200 1 200–1 600 600–1 100
RTP-1-15 Stinol 107, 110 2 000–2 500 1 400–1 800 700–1 300
RTK-H-1 Stinol 100 (old models) 2 500–3 000 1 800–2 200 900–1 500
RTK-X-13A Stinol 101K, 103K 1 900–2 300 1 300–1 700 650–1 200

Saving tips:

  • 🛒 Buy in online stores during sales (for example, on 220 Volt there are discounts of up to 30%).
  • 🔄 Look for a used relay in good condition (on Avito or in repairmen groups VKontakte).
  • 📦 Order together with other spare parts (for example, a thermostat) to save on delivery.
⚠️ Attention: A cheap relay can be more expensive. For example, if a compressor burns out due to a fake, replacing it will cost 5-7 thousand rubles - this is 3-4 times more expensive than the original relay.

7. Where you should not buy a relay for Stinol: black list

There are places where buying a relay is a lottery with a high risk of losing. Avoid:

  • 🚫 Social networks (VK, Telegram, Odnoklassniki): They often sell used parts without a guarantee. relay - 70%.
  • 🚫 Ads "from hand" (Avito, Yula): Sellers may not know the real state of the relay (for example, if it was removed from a non-working refrigerator).
  • 🚫 Unverified Chinese sites (besides AliExpress): On sites like DHgate or Banggood almost 100% are fakes.
  • 🚫 Home supplies stores (Leroy Merlin, OBI): They sell universal relays that are not suitable for Stinol.

If you still decide to buy second-hand, follow the rules:

  1. Ask the seller to take a video of the relay working (a click should be heard when turned on).
  2. Specify from which refrigerator part has been removed (if it is Atlant or Biryusa, it will not fit).
  3. Make an appointment at the service center - there you can check the relay before purchase.

FAQ: Frequently asked questions about purchasing a relay for Stinol

Is it possible to replace a Stinol relay with an analogue from another one? brand?

Theoretically, it is possible, but only if the analogs have identical technical characteristics (operation current, voltage, type of fastening). For example, a relay from Atlanta RTK-X-13 looks similar to RTK-X-13 for Stinol, but has a different shutdown current. Installing such an analogue will lead to overheating of the compressor. It is better to look for an original or a certified substitute (for example, Danfoss 103N0240).

How to find out the relay model for your refrigerator Stinol?

There are 3 ways:

  1. Look at the sticker on the relay itself (usually the article number is indicated there, for example RTK-X-13A).
  2. Find the nameplate on the back wall of the refrigerator - the model is indicated there (for example, Stinol 107), according to which you can select a relay in catalog.
  3. Remove the relay and compare it with a photo on the Internet (on sites like Spare parts-MSK there are catalogs with images).

If you are not sure, take a photo of the relay and show it to the technician - he will select the exact one analogue.

How long does it take to deliver a relay from an online store?

Times depend on the region and delivery method:

  • 📦 Across Moscow and St. Petersburg: 1–3 days (if in stock).
  • 🚚 To the regions: 3–10 days (Russian Post or transport companies).
  • ✈️ Express delivery: 1–2 days (Business lines, SDEK), but 300–500 ₽ more expensive.

If you need a relay urgently, check with the seller about the possibility of self-pickup or courier delivery on the day of the order.

What to do if you bought a relay, but it does not fit?

Action algorithm:

  1. Check if you have made a mistake with the model (compare the article number on relay and in the documentation of the refrigerator).
  2. If the relay really does not fit, contact the seller and demand an exchange or return (according to the law “On the Protection of Consumer Rights” you have the right to this within 14 days).
  3. If the seller refuses, write a claim (a sample can be downloaded on the Rospotrebnadzor website) and send a registered letter.

As a last resort, leave a negative review on the site - this often encourages the seller to solve the problem.

Is it possible to repair a relay instead of buying a new one?

In 90% of cases, the relay cannot be repaired, since its body is sealed, and the internal parts (bimetallic plate, contacts) wear out irreversibly. However, sometimes it helps:

  • 🔧 Cleaning the contacts: If the relay clicks, but the compressor does not start, you can carefully clean the contacts with sandpaper (1000–1200 grit).
  • 🔥 Replacing the spring: In models RTK-X sometimes the trigger spring breaks - it can be replaced with a similar one.

But remember: even after “repair” the relay will not last long (1-3 months) For reliable operation, it is better to buy a new one.