Finding a suitable seal for the Beko refrigerator is a task that requires care, since the energy efficiency of all equipment depends on the quality of this part. If you notice that the door does not fit tightly, ice appears in the chamber, or food begins to deteriorate faster, then it’s time to look where to buy an elastic band for a Veko refrigerator. The spare parts market today is overflowing with offers, but finding an original or high-quality analogue for your model can be difficult.
Equipment owners often encounter confusion in part numbers and sizes, which leads to the purchase of unsuitable parts. An incorrectly selected seal will not provide a tight seal, and the compressor will wear out trying to maintain the set temperature. In this article we will analyze all the nuances of searching, selecting and installing a magnetic seal so that you can fix the problem yourself.
There are several proven channels through which you can purchase the necessary spare part. These can be official service centers, specialized online spare parts stores, or large marketplaces. However, each of these paths has its own characteristics regarding price, delivery time and guarantee of model compliance.
How to accurately determine the Beko refrigerator model
Before you go looking for a store, it is critically important to accurately identify your equipment. Beko refrigerators are available in a huge number of modifications, and even outwardly similar models may have different door geometries. The main identifier is serial numberwhich is usually located on a sticker inside the refrigerator compartment or on the back wall of the case.
On this sticker you will find the model code, which often looks like a combination of letters and numbers, for example RCNE520E23ZXBN or CNE520E23ZX. It is this code that needs to be entered into the search bar on the websites of spare parts sellers. Using only the word “Eyelid” or an approximate description (“two-chamber, white”) is almost guaranteed to lead to an error, since the manufacturer changes the design of the seals from batch to batch.
⚠️ Attention: If the model sticker has worn off or is missing, do not try to guess the size by eye. In this case, it is better to remove the old rubber band, measure the length of the sides and the height of the profile, and then consult with the seller, providing these measurements and photographs of the angles.
It is also worth paying attention to the year of manufacture of the equipment. Older models may have seals that are no longer in production, and you will have to look for them in surplus warehouses or order custom-made ones. Modern models, as a rule, have more affordable consumables on sale.
Original or analogue: what to choose for tightness
When you have decided on the model, you will be faced with a choice between an original spare part from Beko and a universal analogue. Original seals they are made of rubber of a certain composition that does not tan on frost and remains elastic for years. They have a precisely calculated magnetic force and profile geometry that provides ideal clamping.
Universal rubber bands, which can often be found in stock, are cheaper, but require modification. Their magnetic tape may be weaker, and the profile itself may differ in rigidity. This means that after installing a universal seal, you may have to adjust the door hinges or use additional fixation methods to achieve tightness.
Why do cheap analogues quickly fail?
Cheap rubber contains more impurities and less rubber. Under the influence of changes in temperature and humidity, it quickly loses its plasticity, cracks and begins to let air through, negating savings when purchasing.
If you plan to operate the refrigerator for many years without problems with the compressor, it is better to spend money on original article. This is an investment in the reliability of equipment, which will pay off in the absence of unnecessary energy consumption and the safety of products.
Where to look for spare parts: official channels and stores
The most reliable, but not always the fastest way is to contact official service center Beko. There they will select a part for you strictly according to the model code. The advantage of this route is that you get a guarantee of quality and an exact match. However, waiting times can vary from several days to several weeks if the part is not in the local warehouse.
Specialized online stores of spare parts for household appliances offer a wide selection. Here you can often find both originals and high-quality analogues. When ordering online, be sure to check the seller's rating and read reviews about the accuracy of the selection. Large marketplaces also have spare parts sections, but here you need to be extremely attentive to the description of the product.
You should not ignore local radio parts stores and repair shops. They often have catalogs and can order the elastic you need faster than you can find it yourself on the Internet. In addition, you can evaluate the quality of the material live before purchasing.
Article number and dimensions: correspondence table of popular models
To facilitate the search, we have prepared a table with popular series of Beko refrigerators and the corresponding types of seals. Remember that the articles can be updated by the manufacturer, so double-checking the model code is required.
| Beko refrigerator series | Seal type | Approximate article number | Features |
|---|---|---|---|
| RCNE Series (No Frost) | Magnetic, 4 sides | 2156700100 (example) | Requires exact profile matching |
| CNE Series (Combi) | Composite, top/bottom | On request of the model | Often included with the door |
| RD Series (Budget) | Universal edged | Universal | Can be adjusted to size |
| Built-in models | Specific profile | Original only | Complex clamp geometry |
The table shows approximate data, since article is a unique identifier of a specific part. The use of universal solutions for complex series, such as built-in appliances, is highly discouraged, since tolerances there are minimal.
When ordering, pay attention to the package contents. Some seals are sold as a whole for the entire door, while others are sold on individual sides (top, bottom, left, right). For models with a system No Frost the integrity of the contour is especially important.
Instructions: how to properly install a new rubber band
Replacing the seal is a process that you can do yourself if you act carefully. First you need to remove the old rubber band. It can be attached with screws around the perimeter of the door or simply inserted into a special groove. If the fastening is screw, unscrew them after removing the decorative plugs.
It is recommended to warm up the new seal before installation. This can be done by lowering it into warm water (about 50-60 degrees) or simply holding it in a warm room. Warm rubber becomes elastic and easier to take the desired shape, straightening out after packaging.
☑️ Checklist before installation
Insert the seal into the groove, starting from the top corner. Move evenly around the perimeter, without pulling the rubber too hard so as not to deform it. Make sure that the magnetic tape is straight and has not turned out anywhere.
⚠️ Attention: Do not use glue to fix the seal if this is not provided for in the design. The adhesive may destroy the door material or make future replacement impossible. If the rubber band falls out, it means that it was chosen incorrectly or the groove is dirty.
Checking the tightness after replacement
After installing the new part, you need to make sure that the refrigerator is working correctly. The easiest way to check is a test with a sheet of paper. Clamp a regular sheet of paper with the refrigerator door in different places around the perimeter. If the sheet is pulled out with noticeable effort and does not fall on its own, then the pressure is good.
It is also worth visually inspecting the door when closed. There should be no visible gaps or gaps between the housing and the seal. If you notice that in some place the rubber band is bristling or, conversely, is pressed in too tightly, you may need to adjust the door hinges.
In the first days after replacement, observe the operation of the refrigerator. It may work a little longer, getting used to the new tightness, but there should be no extraneous sounds or excessive freezing.
Caring for the seal to extend its service life
For a new rubber band to serve for a long time, it needs to be properly cared for. Wipe the seal regularly with a damp cloth to remove grease and dirt. Food acids and fats can destroy the structure of rubber, making it sticky or, conversely, brittle.
It is recommended to treat rubber once every six months. silicone grease. This prevents drying out and the appearance of microcracks. It is especially important to do this before the start of the heating season, when the air in the room becomes dry.
Avoid use aggressive chemicals, abrasive sponges or sharp objects when cleaning the refrigerator near the seal. Damage to the profile even in a small area can disrupt the tightness of the entire chamber.
Is it possible to use a universal rubber band if the original cannot be found?
Yes, you can, but it will require effort. Universal seals often have a channel along their entire length into which a magnetic cord is inserted. You will have to carefully remove the cord from the old elastic band (if it is intact) or buy a new magnetic cord separately and insert it into the universal profile, cutting the corners at 45 degrees and gluing them with special glue for rubber.
Why may the new elastic band not fit right away?
The new seal has “shape memory” from packaging and transportation (twisted state). He needs time to straighten out. This usually takes from 2 to 24 hours. You can speed up the process by heating the creases with a hairdryer or using warm air.
How to distinguish high-quality rubber from cheap ones?
High-quality rubber is matte, uniform in color, without a strong chemical odor. When compressed, it quickly returns to shape. A cheap one may have a sticky surface, a strong smell and, after compression, slowly straighten out or remain wrinkled.
Do you need to change the seal on the freezer compartment separately?
Yes, if you have a refrigerator with a separate bottom freezer, the seals there may differ in size and profile from the main refrigerator compartment. You need to order two different parts if you change everything at once.