Search thermostat for refrigerator brand Stinol often becomes a task of increased complexity, especially when the equipment has been in operation for more than ten years. Owners are faced with a situation where regular hardware stores do not have the required part in stock, and the original spare parts are discontinued (out of production). However, thermostat is a critically important unit, without which normal operation of the unit is impossible: it is it that controls the temperature inside the chambers and gives the command to the compressor to turn on or off.
The situation is aggravated by the fact that factories Stinol have been shut down for a long time, and official service support is limited by the availability of stock balances or analogues from third-party manufacturers. You will have to look for compatible ones analoguesthat are suitable in size, capillary tube length and electrical parameters. In this article, we will look at exactly where it is most advisable to look for this part, how not to make a mistake with the article number and what to pay attention to when purchasing so as not to throw money away.
Before going to the store or placing an order online, you need to accurately identify the model of your refrigerator. Serial number and the exact markings are often found on a plastic sticker inside the camera or on the back of the case. Without this information, the purchase will be a lottery, since many modifications Stinol were produced, and they were equipped with different types of automation.
Identification of the model and compatible thermostat
The first step to a successful purchase is understanding what exactly thermostat was in your refrigerator initially. The line Stinol was based on components of the Italian company Mertik (later Honeywell) and Danish Danfoss. The most common model for single-chamber refrigerators and freezers is K-59, and for two-chamber models with a bottom-mounted freezer it was often used K-50 or K-57. An error in choosing a series will result in the refrigerator either not turning off or not being able to reach the desired temperature.
The critically important parameter is the length capillary tube. This is a thin copper tube that extends from the thermostat housing and is inserted into the evaporator. If you buy a part with a tube length of 0.7 meters instead of the required 1.5 meters, you simply will not have enough length for proper installation, and you will have to invent complex designs or heat the tube, which is dangerous. Also pay attention to the number of contacts: there can be two or three (the third is needed to indicate the operation of the compressor).
⚠️ Attention: When purchasing an analogue, make sure that the thread for the capillary tube and the overall dimensions of the body match the original. In some models Stinol the seat in the control panel is very narrow, and a case from another manufacturer may simply not fit into the allocated slot.
For an accurate selection, use the correspondence table of popular refrigerator models Stinol and types of thermostats. This will help narrow your search and quickly find the right product in supplier catalogs.
| Refrigerator model | Thermostat type (Original/Analog) | Capillary tube length | Number of contacts |
|---|---|---|---|
| Stinol 101, 102, 103 | TAM-133 / K-59 | 1.3 - 1.5 meters | 3 |
| Stinol 104, 110, 116 | TAM-133 / K-59 | 1.3 - 1.5 meters | 3 |
| Stinol 101 L, 102 L | TAM-133 / K-59 | 2.5 meters | 3 |
| Stinol 205, 242 | TAM-133 / K-59 | 1.3 - 1.5 meters | 3 |
| Stinol RF freezers | TAM-133 / K-59 | 0.7 - 0.9 meters | 3 |
How to distinguish K-59 from K-50 visually?
The housings of thermostats of the K-59 and K-50 series are almost identical in appearance, but have a critical difference in the temperature range of operation. K-59 is designed for the refrigerator compartment (shut-off temperature about +3...+5°C), and K-50 for the freezer (shut-off temperature about -18...-24°C). If you confuse these parts, the refrigerator will either turn into a freezer or stop freezing at all.
Specialized online stores of spare parts
The most reliable source where you can buy a thermostatare specialized online stores selling components for household appliances. Unlike general marketplaces, there is a higher chance of finding a part with the correct specification and receiving competent advice. Large market players, such as Zip-M, Partsdirect, Rembitteh or Ice-parthave been supplying specifically for the repair of refrigeration equipment for decades.
The advantage of such stores is the availability of detailed catalogs with photographs, diagrams and instructions compatibility. Often in the product card there is a section “Analogues”, which indicates what can replace the discontinued original. For example, instead of a rare Mertik you will be offered a high-quality analogue from Thermocontrol or Ortalthat fully complies with the technical requirements of Stinol.
- 📦 Availability: In specialized stores, spare parts for Stinol usually in stock, since this is a popular product for old refrigerators.
- 🔧 Expertise: Managers of such sites know the nuances of installation and can tell you whether an additional insulation or adapter is needed.
- 📄 Documentation: You receive a receipt and a guarantee, which is important to confirm the quality of the purchased item automation.
However, it is worth Keep in mind that prices in specialized stores may be higher than those of private traders on bulletin boards. This is a fee for guaranteeing that the part is new, working and meets the stated parameters. When ordering, be sure to check the delivery conditions, as some stores ship goods only through transport companies, which may not be profitable for one small part.
Search on marketplaces and message boards
Large marketplaces (such as Ozon, Wildberries, Yandex Market) and message boards serve as an alternative to specialized stores (for example, Avito). The situation here is twofold: on the one hand, the choice is huge and prices may be lower, on the other hand, there is a high risk of running into low-quality goods or scammers. Marketplaces often sell thermostats K-59 made in China, which are cheap, but their service life may be lower than that of their European counterparts.
When searching on Avito you can find both new spare parts from private owners and used parts from disassembly. Buying a used thermostat is a lottery. The mechanical part (bellows) may be worn out, resulting in unstable operation. However, if you are looking for a rare case or knob (adjustment knob), then disassembly is the only option. Look for sellers with high ratings and real reviews.
⚠️ Attention: On marketplaces there are often product cards with incorrect names. The seller may write “Thermostat for Stinol”, but in the specifications indicate the length of the tube is 0.5 meters, while you need 1.5. Always read the full description and specifications, not just the title.
Another important aspect is checking the seller. There are many resellers on message boards who do not understand technology. Ask direct questions: “Which plant is the manufacturer?”, “Is the part new or refurbished?”, “Are there markings on the body?” If the seller cannot answer these questions, it is better to refrain from purchasing. The risk of getting a non-working mechanism is too great. (Ozon/WB) mechanism too big.
Local service centers and workshops
If you are not confident in your abilities or are afraid of making a mistake with your choice, the best solution would be to contact to your local refrigerator repair shop. From masters specializing in Stinol, Indesit i Ariston, there is almost always a supply of running thermostats K-59 i TAM-133. Purchasing a part from a specialist often includes a guarantee for the spare part itself and, possibly, for the work of installing it, if you decide to entrust it to him.
The price at the service center will be higher than the market value of the part on the Internet, since the master includes his margin and the costs of maintaining the point. However, you get a “turnkey product”: you don’t have to wait for delivery, guess about the length of the tube or resolder the contacts. The technician will select the desired option from those available to him.
- 🛠️ Check: The technician can immediately check the serviceability of your old thermostat and confirm the need for replacement.
- ⚙️ Adaptation: If there is no exact analogue, the technician can remake the existing thermostat (replace the tube, contacts).
- 🤝 Warranty: In the event of a defect, the part will be replaced without any questions or bureaucratic delays.
It is also worth considering the option of calling a technician to your home for diagnostics. Even if you plan to buy the spare part yourself, paid diagnostics will help you accurately identify the problem. Often, users change the thermostat, although the problem lies in start-up protection relay or a freon leak. A professional look will save you money on unnecessary purchases.
☑️ Checking the parts seller
Articles and technical specifications for search
For a successful search on the Internet It is important to know the exact articles. For refrigerators Stinol the following codes and markings are most often used. By entering them into the search, you significantly increase the chances of finding exactly what you need.
The main article to look for: TAM-133 (or its direct analogue K-59 L1134). The numbers at the end can vary (L1134, L1195, L1260), where the last three digits indicate the length of the capillary tube in centimeters. For example, L1134 is 1.34 meters. There are also thermostats TAM-133B (with a defrost button) and TAM-133C.
If you are looking for a part for the freezer, your code is TAM-145 or K-50. Some models may require a thermostat TAM-132 (analog K-57). Always check the markings on the body of your old part. Even if it does not work, the factory inscription (for example, Mertik W14 or Danfoss 077B) will give a clue.
It is important to understand the difference between mechanical and an electronic thermostat. Classic Stinol uses mechanics. An attempt to install an electronic analogue will require a serious modification of the control system, which is practically impossible at home. Therefore, look for mechanical models with a similar shape of the stem and body.
Frequently asked questions when purchasing (FAQ)
Is it possible to install a thermostat with a longer tube than necessary?
Technically it is possible, but not advisable. The excess copper tube will have to be carefully rolled into a ring and placed inside the body of the refrigerator or freezer, making sure that it does not touch the moving parts of the compressor (if it passes there) and does not create interference. The main thing is not to break the tube or break its seal. You cannot shorten the tube at home, as this requires soldering in an inert gas environment and charging with refrigerant.
What is the difference between thermostats K-59 and K-57?
The main difference lies in the response temperature range and the length of the capillary tube. K-59 (analog TAM-133) usually has a longer tube (about 1.3-1.5 m) and is intended for refrigerators. K-57 (analog TAM-132) often has a shorter tube (about 0.7-0.9 m) and can be used in small refrigerators or freezers. Installing the wrong one will result in an incorrect temperature.
Why does the new thermostat click, but the refrigerator does not turn on?
The click means that the mechanical part thermostat works and closes the contacts. If the compressor does not start, the problem may not be with the thermostat, but with start-up relaythe compressor itself or the lack of electricity at the input to the circuit. It is also worth checking whether the wires are tightly seated in the thermostat terminals.
Where can I find the adjustment knob for the Stinol thermostat?
Knobs (knobs) are often sold separately from the thermostat itself, as they may break or get lost. You need to search for them using the query “Stinol thermostat handle” or “K-59 handle”. They come in different types: notched, smooth, with a hole for a rod of a certain diameter. It is better to take the old handle with you for comparison or order a set (thermostat + handle) at once in a specialized store.
How much does a thermostat cost for Stinol in 2026-2026?
The price of an analogue thermostat K-59 / TAM-133 varies in the range from 800 up to 1,500 rubles depending on the store, region and exchange rate. Original remnants can cost significantly more. Chinese non-name analogues can cost from 500 rubles, but their reliability raises questions.