When the refrigerator Ariston temperature begins to deteriorate, and ice appears on the walls, the first thing you should pay attention to is the condition of the door seal. It is this seemingly simple part that is responsible for the tightness of the chamber, preventing warm air from penetrating inside and cool air from escaping outside. Owners often wonder where to buy a rubber seal for an Ariston refrigerator, since finding an original spare part is not as easy as we would like.
Ignoring the problem of a loose door fit can lead to serious consequences for the compressor. The engine will work in increased mode, trying to compensate for the loss of cold, which will significantly shorten its service life. Circuit tightness is the foundation for the proper operation of any refrigeration equipment, and you cannot skimp on the quality of this part.
In this article we will look in detail at how to determine the exact model of your unit, what part numbers exist for different series Hotpoint-Ariston, and where is the best place to purchase consumables. You will learn how original spare parts differ from high-quality analogues, and receive step-by-step installation instructions.
How to determine the exact model and article number of the seal
The first thing you need to do before purchasing is to identify your equipment. The brand Ariston has been part of the concern for many years Indesit Company (now Whirlpool Corporation), so many spare parts are unified. However universal rubber bands does not exist: the profile may differ even within the same series, released in different years.
The most reliable way is to find the technical data sheet of the device or a sticker with the serial number. It is usually located inside the refrigerator compartment on the side wall or on the plinth panel at the front. You need a code that starts with a letter or combination of letters, such as B 18 F or RM 1750.
⚠️ Attention: Don't rely solely on visual profile similarity. A difference in millimeters in the mounting location or the bend of the corner can make installation impossible without complex adjustments that will break the seal.
If the sticker has worn off, you can try to find the marking on the seal itself. Often on the inside of the elastic band, at the bottom, it is knocked out catalog number. It may look like a long number combination. By writing down this code, you will significantly simplify your search in catalogs of spare parts suppliers.
Where to buy original and compatible ones seals
The market for spare parts for household appliances today offers several main sales channels. For refrigerators Ariston the situation is as follows: you can find the part in official service centers, specialized online spare parts stores and large marketplaces.
Official service centers are the most reliable, but often the most expensive option. Here you are guaranteed to receive original spare parts, which will fit perfectly into place. Managers will select an article from the database using the serial number of your device. This is an ideal option for new models or complex door configurations.
Specialized online spare parts stores offer a wider selection, including high-quality analogues. Such catalogs often contain cross-codes (analogs), which allows you to find a replacement if the original is discontinued. When purchasing here, it is important to carefully read the description, paying attention to compatibility with your series Hotpoint-Ariston.
Large marketplaces also have sections with spare parts, but here the risk of running into a low-quality product is higher. The profile may be stiffer than the original, and the material may lose elasticity faster. If you choose this path, be sure to study customer reviews, especially those where there is a photo of the installed rubber band.
Table of popular models and articles of seals
To simplify the search, we have compiled a table with the most common models of refrigerators Ariston and their corresponding article numbers of seals. Please note that one article may be suitable for several modifications, since the door design often remains unchanged within the line.
| Series / Refrigerator model | Seal type | Approximate article (OEM) | Features |
|---|---|---|---|
| Ariston B 18 F / B 18 A | Magnetic, 4 sides | 433118 (set) | Classic profile, easy to install |
| Ariston RM 1750 / RM 1850 | Corner, glued | C00313266 | Requires careful gluing of corners |
| Ariston MB 1800 / MB 2000 | Plug-in (into groove) | 436659 | Rigid profile, inserted into a plastic box |
| Hotpoint-Ariston RS 600 | Magnetic circuit | C00310362 | Universal for many models of the RS series |
The table shows original codes, however, their direct replacements from third-party manufacturers may be available on sale. When ordering, be sure to check with the seller whether the kit includes fasteners or glue, if the design requires it.
If your model is not on the list, do not despair. Use the serial number to search major vendor databases. Often the same seal profile is used on refrigerators of different brands that are part of the same holding, for example Indesit or Stinol.
Original or analogue: what to choose for long service life
This is an eternal question for any equipment owner. Original seals Ariston are made from special rubber or thermoplastic elastomer, which remains flexible at low temperatures and does not deform over time. They undergo strict quality control and exactly repeat the geometry of the door.
Analogues can cost 2-3 times cheaper, but their quality varies. A good analogue will be soft, elastic and have a powerful magnetic liner around the entire perimeter. Cheap options often have an unpleasant chemical odor, are too hard in the cold and can begin to crumble after six months of use.
⚠️ Attention: If you bought an analogue and smelled a strong plastic smell, let the rubber band rest in a warm room for several days before installation. This will help air out volatile substances and straighten out wrinkles.
When choosing, pay attention to the color. Original rubber bands for refrigerators Ariston usually have a white or light gray tint. If you see clearly yellow or bluish rubber, this may indicate the use of recycled materials, which will affect durability.
The secret of checking the magnet
Put the seal on a flat metal surface (for example, a refrigerator door). It should stick tightly along its entire length. If gaps or swellings form in some places, the magnetic tape inside is glued unevenly or it is weak.
Instructions for self-installation of the seal
Replacing the sealing rubber is a procedure that can be performed independently, without the help of a specialist. The main thing is to act carefully and consistently so as not to damage the new part and install it correctly in the groove.
First you need to remove the old seal. In most models Ariston it is simply inserted into a plastic groove on the inside of the door. You need to pry the edge with a screwdriver (be careful not to scratch the plastic) and pull it towards you. The rubber should come out easily.
Before installing a new part, it is recommended to prepare the surface. The plastic door frame should be wiped with a degreaser or alcohol, removing any remaining old adhesive, dirt and grease. This will provide better fixation if the new rubber requires gluing the corners.
☑️ Preparation for installing the seal
The process of installing a new one sealing collar starts from the top corner. Insert the edge of the elastic into the groove and gradually move down, pressing the profile tightly. Having reached the bottom, cut off the excess (if required by the instructions for a specific article) or connect the ends end-to-end.
An important point: if the elastic band arrived twisted (in vacuum packaging), it needs to be straightened. You can use a household hair dryer for this. Heat the seal with warm (not hot!) air, it will become softer and more elastic, which will make installation and straightening of corners easier.
After installation, close the refrigerator door and wait a few hours. The magnetic tape should “grab” with the body. If you see that in some places the door does not fit tightly, you can gently warm these areas with a hairdryer through the fabric and press with your hand until it cools.
Checking the tightness after replacement
After you have poured the replacement, you need to make sure that your work is effective. There is a simple and effective way to check - a test with a sheet of paper. Take a regular A4 sheet, clamp it with the refrigerator door in different places around the perimeter.
If the seal is installed correctly, the sheet should be pulled out with noticeable force. If the paper slides out freely or falls out on its own, it means in this place the seal is broken. This may be due to an uneven profile, contamination or a weak magnet.
Also, a visual inspection will help identify defects. The door should close tightly, without gaps. Pay attention to the corners: this is where problems with fit most often arise if the elastic was incorrectly stretched or wrinkled during installation.
Regular check of the condition seal (once every 3-6 months) will allow you to notice wear in time and avoid more serious damage. Wipe the rubber with a soft damp cloth, do not use aggressive chemicals that can dry out the material.
Frequently asked questions (FAQ)
Is it possible to restore an old seal if it has simply lost its elasticity?
You can temporarily extend the life of the seal by heating use a hairdryer or treat it with a special rubber conditioner. However, if cracks or tears appear, restoration is impossible - only complete replacement of the part. Why does the new seal smell like rubber and how to get rid of it? replacement part.
Why does the new seal smell like rubber and how to get rid of it?
The smell of new rubber is normal. It will disappear on its own within 1-2 weeks of use. To speed up the process, wipe the gum with a solution of citric acid or soda, but do not use chlorine-containing products.
Is the seal from Indesit suitable for an Ariston refrigerator?
Yes, since both brands belong to the same concern and often use the same platforms. However, checking the article numbers or section profile is mandatory, since there may have been changes in different years of production.
How often do you need to change the sealing gum?
The service life of a high-quality seal is 7-10 years If you notice that the door has begun to close worse, and moisture or ice has begun to accumulate inside the refrigerator, it’s time to think about buying a new part.
Where can I find a door disassembly diagram for my Ariston model?
Disassembly diagrams (exploded view) can often be found in service manuals that are posted online upon request"model + service manual". There are also visual instructions on the channels of household appliance repair specialists.