Where to buy a drawer for the freezer compartment of an Indesit refrigerator: official and alternative options

A lost, cracked or deformed drawer in the freezer Indesit is a problem that many owners face. Without this element, it is difficult to organize food storage: frozen vegetables, meat and semi-finished products fall apart throughout the compartment, and the door may not close tightly. But where to find a replacement? Original spare parts from the manufacturer are expensive, and similar options are not always suitable in size or material.

In this article we will analyze 7 proven purchasing methods from official dealers to the secondary market, compare prices and give advice on how to avoid mistakes when choosing. We will pay special attention to part codes (articles), without which it is easy to buy an unsuitable model. You will also learn how to temporarily organize storage without a box and what to do if the original spare part is discontinued.

Important: before purchasing, measure the internal dimensions of the freezer and check the markings on the old box (if it is still there). Even refrigerators Indesit of the same series may have different components!

1. Indesit official online store: pros and cons

The most reliable way to buy original box is to order it directly from the manufacturer. The website Indesit has a section “Spare parts and accessories”, where you can enter the model of the refrigerator and find all the available parts. Advantages:

• 🔹 100% compatibility with your model (if the article number is specified correctly).
• 🔹 Warranty for the part (usually 6-12 months).
• 🔹 Possibility to return or exchange inconsistency.

However, there are pitfalls. Firstly, prices here are higher than those of third-party sellers (sometimes by 30–50%). Secondly, not all spare parts are always in stock - popular models may be in stock, but rare ones will have to wait 2-4 weeks. Thirdly, delivery is paid and depends on the region.

How to find the required part:

1. Go to the official website Indesit to the "Spare parts" section.
2. Enter the model of the refrigerator (located on the sticker inside the chamber or on the back wall).
3. In the list of parts, find “Drawer for freezer” or “Plastic drawer”.
4. Check the article number (for example, C00345678) with the markings on the old one box.

⚠️ Attention: On the website Indesit sometimes they indicate spare parts for the entire line of refrigerators, but they may differ in depth or width. Always check the dimensions!

2. Indesit service centers: where to find and how to save

Authorized service centers (ASC) are another reliable source of original spare parts. They work directly with the manufacturer and often stock popular parts. Advantages:

• 🔧 Consultation with a compatibility specialist.
• 🔧 Possibility to bring an old box for comparison.
• 🔧 Sometimes cheaper than on the official website (due to wholesale purchases).

How to find the nearest one ASC:

1. Call the hotline Indesit (the number is on the website).
2. Use the map of service centers in the "Support" section.
3. Check reviews in Yandex.Maps or 2GIS - some centers work only with warranty repair.

The cost of a box in the ASC may vary. For example, for the model Indesit BIAA 13 the price ranges from 2,500 to 4,000 rubles, depending on the region. Don’t hesitate to call several centers - the difference sometimes reaches 30%!

3. Marketplaces: Wildberries, Ozon, Yandex Market

If the original box is too expensive or is out of stock, you should turn to marketplaces. Here you can find both branded parts and analogues from third-party manufacturers. The main thing is to carefully check:

• 📏 Dimensions (depth × width × height).
• 🔢 Article (must match the original).
• 📦 Material (plastic must be frost-resistant, otherwise it will crack at -18°C).

Examples of search queries:

• "Drawer for freezer Indesit BIAA 13 original"
• «Plastic drawer for Indesit freezer C00345678»
• "Replacement box freezer compartment Indesit 55×40×20 cm"

On Wildberries i Ozon they often sell universal boxes that are suitable for several models. They are cheaper than the original ones (from 1,200 rubles), but may differ in fastenings or height. Always read the reviews - some buyers complain that the plastic is too fragile or cannot withstand low temperatures.

⚠️ Attention: On marketplaces they often sell boxes “under Indesit”, but without indicating the exact model. Such parts may not be suitable in terms of fastenings or shape. Always ask the seller for a photo with dimensions!

4. Specialized stores of spare parts for household appliances

Stores like “220 Volt”, “M.Video”, “Eldorado” or local points selling spare parts are a good alternative to marketplaces. Here you can:

• 🛒 Feel the part before purchasing.
• 📞 Get advice from a sales consultant.
• 🔄 Return or exchange without problems (if it doesn’t fit).

Examples stores:

• 220 Volt —there is a section “Spare parts for refrigerators”, you can order online with pickup.
• All-Zapchasti.ru —specializes in components for household appliances.
• Local stores —search for “spare parts for refrigerators [your city]. For example, a box for

Prices in such stores are usually lower than those of official dealers, but higher than at Avito. For example, a box for Indesit TIA 16 will cost 2,000–3,500 rubles. The main advantage is the ability to bring the old box and compare on the spot.

Compare the sizes of the new and old box|Check the fastenings (grooves, latches)|Make sure that the plastic does not break when pressed|Ask about the possibility of returning if it doesn’t fit -->

5. Buying second hand: Avito, Yula, local message boards

If your budget is limited, you can look for a used box on Avito, Yule or local forums. This is the cheapest option (from 500 rubles), but with risks:

• ⚠️ The part may be cracked or deformed.
• ⚠️ There is no guarantee that the box will fit your model.
• ⚠️ You'll have to go for pickup (delivery is rarely offered).

How to minimize risks:

1. Ask the seller for a photo of the box with a ruler (to check the dimensions).
2. Check which model Indesit the part was removed from.
3. Agree to meet in a crowded place (for example, near the metro).
4. Check the box on the spot: it should not have cracks or severe scratches.

Examples of successful purchases:

• Box for Indesit BI 16 — 800 rubles (Avito, Moscow).
• Set of 2 boxes for Indesit DF 5200 — 1,500 rubles (Yula, St. Petersburg).

⚠️ Attention: On the secondary market they often sell boxes from refrigerators of other brands (for example, Ariston or Hotpoint), claiming that they are suitable for Indesit. This is not always the case - even related brands may have different fastenings!

6. Foreign sites: AliExpress, eBay, Amazon

If the required part is not available in Russia, you can try to order it abroad. On AliExpress, eBay or Amazon sometimes they sell original and universal boxes for Indesit. Pros:

• 🌍 Wide range (including rare models).
• 💰 Sometimes cheaper than in Russian stores.

Cons:

• ⏳ Long delivery (from 2 weeks to 2 months).
• 📦 Risk of receiving a defective or incompatible part.
• 💱 Exchange rates may increase the final price.

Purchasing tips:

1. Look for sellers with a rating above 95% and a large number of reviews.
2. Write a message to the seller asking to confirm compatibility with your model Indesit.
3. Choose delivery with a track number (for example, Cainiao or Yanwen).

Example of a successful purchase: box for Indesit BIA 18 on AliExpress for 1,800 rubles (with delivery). However, be prepared for the fact that the part may come with defects or may not fit - it will be difficult to return it.

What to do if the box does not fit?

If you bought a box on a foreign site and it does not fit, try:

1. Contact the seller with a photo of the discrepancy (sometimes they give a partial refund).

2. Sell the item on Avito or Yula data-i="193">3. Use it as a template for making a new box (for example, from food-grade plastic). as “unsuitable for Indesit».

3. Use it as a template for making a new box (for example, from food-grade plastic).

7. Making a box to order: when it is profitable

If the original box is no longer in production and analogues are not suitable, you can order its production. Indesit (for example, produced before 2010). Options:

• 🔨 Plastic workshop — made according to your drawings from frost-resistant plastic (ABS or polypropylene).
• 🛠️ 3D printing — suitable for complex shapes, but expensive (from 5,000) rubles).
• 📦 Independent production —from food-grade plastic or plexiglass (requires skills in working with tools).

How to order a box:

1. Take the exact dimensions of the old box (or freezer, if there is no box).
2. Find a workshop for the request “manufacture of plastic parts to order [your city].”
3. Provide a sketch or 3D model (can be done in the program SketchUp).
4. Specify what kind of plastic will be used - it must withstand temperatures down to -24°C.

The cost of production depends on the material and complexity. For example, a simple box made of ABS plastic will cost 2,500–4,000 rubles, and 3D printing with reinforcement will cost from 6,000 rubles. This option is justified if the refrigerator is a rare model. or you want a non-standard solution (for example, a drawer with dividers).

FAQ: Frequently asked questions about purchasing Indesit freezer drawers

How to find out the article number of your drawer if it is broken and the markings are not visible?

The article can be found:

1. In the instructions for the refrigerator (section "Spare parts" or "Device diagram").
2. On the website Indesit po refrigerator model (enter it in the search for spare parts).
3. On the forums (for example, Mastergrad or Housing.ru) - look for topics on your model.
4. At the service center - bring a photo of the box, and the technician will help you choose an analogue.

If all else fails, measure the box and look for the size.

Is it possible to use a box from another brand (for example, Ariston or Atlant)?

Theoretically, it is possible, but only if:

• They match dimensions (accurate to the millimeter).
• Suitable fastenings (grooves, latches, guides).
• Material calculated on low temperatures (ordinary plastic will crack).

For example, some boxes from Ariston are suitable for Indesit (since these are related brands), but you need to check the article numbers. Boxes from Atlant or Samsung are almost never compatible.

What to do if the original box is discontinued?

Solution options:

1. Search for an analogue - look by size on marketplaces or in stores spare parts.
2. Custom production —in a plastic workshop or 3D printing.
3. Universal drawers —for example, from IKEA (series 365+), but they rarely fit in depth.
4. Temporary replacement - use food containers or stainless steel baskets (but they can rust).

If the refrigerator is old, think about buying a new one - repairs may cost more.

How to temporarily organize storage without a box?

While you are looking for a replacement, you can:

• Use food containers with lids (for example, from Tupperware).
• Install metal baskets (check that they do not rust).
• Divide the space silicone mats (so that products do not slip).
• Secure plastic trays with double-sided tape (temporary solution).

Do not use cardboard or wood - they absorb moisture and become a source of bacteria.

How much does it cost to deliver a box from abroad and is it worth it?

The cost depends on the weight and country of departure:

• AliExpress (China) - 300-800 rubles, delivery 15-40 days.
• eBay (Europe/USA) - 1,000–3,000 rubles, delivery 10–20 days.
• Amazon —from 1,500 rubles (if the seller ships to Russia).

Is it worth ordering? Only if:

• The box is rare, and it is not available in Russia.
• The price with delivery does not exceed the cost of a new refrigerator.
• You are ready to wait and take risks (defects, duties, delays).