Finding suitable containers for freezing food in the refrigerator Atlant often turns into a real quest for the owner of the equipment. Unlike Western brands, where trays are sold as separate items in each service, the Belarusian manufacturer rarely supplies them as a separate product unit to the retail network. This creates a situation where, if a transparent box breaks or is lost, the user is faced with the need to look for alternative ways to solve the problem. Original containers This is not just plastic, but a part designed taking into account the dimensions of a specific shelf and air circulation system.
The situation is complicated by the fact that over many years of production the company has produced hundreds of modifications of refrigerators, and freezer chamber design they could differ significantly. In some places, deep drawers were used, and in others, simple plastic trays on guides were used. It is important to understand that there are practically no universal solutions here, and an attempt to push in an element of the wrong size can break the seal of the chamber or damage the door seal.
In this article we will analyze all possible acquisition channels, from official services to self-production, and will also pay attention to the nuances of sizing. You won't have to guess whether the tray you find will fit if you know the exact parameters of your model. We will consider options when purchasing a new part is not economically feasible, and we will offer practical alternatives.
Official channels and service centers
The most reliable, but not always the fastest way to get an original part is to contact the authorized service centers (ASC) of the brand Atlant. It is there that batches of spare parts arrive from manufacturing plants. However, it is worth considering that service centers they are primarily focused on the repair of complex electronics and compressors, and not on the sale of small plastic. Therefore, the availability of the required tray in the warehouse of a particular point cannot be guaranteed with one hundred percent probability.
The search process through officials requires preparation. You need to know not just the brand of the refrigerator, but its complete one, which is indicated on the nameplate inside the chamber or on the back wall. Without this code, the manager may make a mistake, since visually similar boxes from different series may have different runner geometries. It often happens that there is no part in one city, but it is listed in a warehouse in Minsk or another regional center. catalog number, which is indicated on the label inside the camera or on the rear wall. Without this code, the manager may make a mistake, since visually similar boxes from different series may have different runner geometries. It often happens that there is no part in one city, but it is listed in a warehouse in Minsk or another regional center.
⚠️ Attention: When ordering through an official service center, check the delivery cost. Often the price of the container itself is 500-800 rubles, but delivery from another city can double this amount, which makes the purchase economically unprofitable.
If there is no representative office in your city, try contacting the central office or large equipment distributors Atlant. They can place an order directly from the manufacturer. This is a slow process, taking from two weeks to a month, but it ensures that you receive a product that will not crack at extremely low temperatures. Cheap analogues often break after the first defrosting. food grade plastic, which will not crack at extremely low temperatures. Cheap analogues often break after the first defrosting.
Specialized spare parts stores
In large cities there are stores specializing exclusively in components for household appliances. The assortment here is much wider than in ordinary electronics hypermarkets. At such points you can often find not only original parts, but also high-quality ones, which are produced by third-party factories with or without a license. The main advantage of such stores is the opportunity to visually evaluate the product before purchasing. analogs, which are produced by third-party factories with or without license. The main advantage of such stores is the ability to visually evaluate the product before purchasing.
When visiting the store, be sure to take an old, damaged container with you for comparison. Even if it is cracked, its overall geometry will help determine whether a new one will fit. Pay attention to the fastening system: in some models Atlant the drawers are simply inserted into a niche, while in others they have special guide runners latches. A discrepancy of even a few millimeters can cause the box to get stuck or warp.
The price range in such stores varies. Original plastic will cost more, but its service life is much longer. Sales consultants at specialized outlets often have compatibility databases and can use the catalog number of the refrigerator to find a suitable drawer from another, newer or older model that is structurally identical to yours.
☑️ What to take with you to the spare parts store
Search on online sites and marketplaces
With the development of e-commerce, the search for rare spare parts has shifted to the Internet. On large marketplaces and specialized online spare parts stores you can find trays for freezers Atlant various series. The key advantage here is the ability to filter by parameters and read reviews of other customers who have already encountered the selection problem.
When searching, use not only the brand name, but also specific series, for example, KSh-262, XM 4008 or Atlant 6221. Sellers often indicate compatible models in the product name. Study the photographs carefully: the shape of the front wall, the depth and location of the handles may differ. Universal containers rarely found, most often original used ones or new remnants from production are sold.
Particular attention should be paid to advertisements for the sale of used equipment with disassembly. People often sell refrigerators with the compressor not working, but with the plastic intact. Buying such a refrigerator for pennies for the sake of whole drawers is an excellent strategy. In this case, you get not only trays, but also spare shelves, seals and other little things that may be useful in the future.
How to check the seller on the marketplace?
Pay attention to the seller’s rating and the number of completed orders. If this is an individual selling the "original", ask for additional photos of the plastic seam and markings. Factory-made plastic is always marked PP (polypropylene) and the manufacturer's logo on the bottom or side wall.
Don't forget about bulletin boards. There you can often find people selling leftovers from dismantled refrigerators. The price there may be symbolic, but you will have to spend time searching and negotiating. When ordering delivery, be sure to require high-quality packaging, since during transportation, plastic that is fragile in the cold can easily crack.
Compatibility and size chart
Understanding what sizes of containers are used in different series greatly simplifies the search. Although model range wide, manufacturers often standardize drawer sizes for entire lines of refrigerators. Below is a reference table that will help you navigate the dimensions.
| Atlant refrigerator series | Freezer type | Approximate drawer size (WxDxH), mm | Mounting features |
|---|---|---|---|
| KSh-255, KSh-256 | Drawers | 320 x 400 x 130 | Guide runners |
| XM 4008, XM 4009 | Plastic trays | 310 x 380 x 120 | Inserts, without runners |
| Atlant 6221, 6222 | Deep containers | 325 x 410 x 150 | Reinforced sides |
| No Frost series | Specific trays | Individually | Depends on the blowing system |
Manufacturing tolerances plastics can be several millimeters in any direction. Therefore, before purchasing, it is always recommended to take independent measurements of the internal niche of the freezer. Measure not only the width and depth, but also the height of the free space so that the top drawer does not rest against the shelf or chamber lid.
⚠️ Attention: Specifications and equipment of models may vary depending on the year of manufacture. The factory may make design changes without notice. Always check the dimensions with the (physical object) or check with the seller about the possibility of a return if the part does not fit.
Alternative solutions and universal containers
If you cannot find the original box, or its cost seems excessive to you, you can consider the option with universal containers. Hardware stores and kitchenware departments sell a variety of plastic containers that could theoretically be the right size. The main requirement for them is frost resistance. Ordinary household plastic at temperatures of -18°C and below becomes brittle and can burst from the slightest impact.
Look for containers marked snowflake (snowflake) or indicating the temperature range down to -40°C. Such containers are often used for storing frozen semi-finished products in supermarkets. They may not have the ideal geometry for your niche, but if they fit freely into the chamber and do not block the door from closing, they can be used.
Another option is to use flexible silicone molds for freezing. They take up less space, are easy to clean and do not break. However, their disadvantage is the absence of a rigid structure: you cannot form them into a “pyramid” or use them as a support for other products, as is possible with rigid trays Atlant.
Independent production and 3D printing
In the era of additive technologies, the solution to the problem can be printed on a 3D printer. It may seem complicated, but many cities have 3D printing services that are willing to customize your design based on your drawings or even a photo of an entire box. The key point here is the choice of material. Regular PLA plastic will not work, as it deforms in the cold.
For printing you need frost-resistant plastic, for example, PETG, ABS or specialized Flex. These materials retain elasticity and strength at low temperatures. The cost of such a service may be higher than the factory part, but you will receive a product that perfectly follows the geometry of your camera, perhaps even with improved characteristics, for example, higher sides.
If you have access to a 3D printer and modeling skills, you can create a digital copy of the broken box. To do this, it is enough to scan the surviving fragments or take measurements from the niche. This is a path for enthusiasts, but it allows you to get a unique part that is not on sale.
Frequently asked questions (FAQ)
Can containers from other Atlant refrigerators be used?
Yes, boxes from different models are often interchangeable, especially if the refrigerators belong to the same series or have a similar internal volume (for example, 2-chamber models with a height of 150-170 cm). However, it is critically important to check the dimensions: the width and depth must match within 2-3 mm, otherwise the box may jam or not fit.
How to replace the tray if the original is nowhere to be found?
The best replacement is a frost-resistant food container of a suitable size from a hardware store. Make sure there is a snowflake mark on the bottom. You can also use wicker baskets or boxes, but they are less washable and can absorb odors, so their use in the freezer is not recommended for long-term storage.
Why does plastic crack in the freezer?
Plastic cracks due to loss of elasticity at low temperatures (material aging) or mechanical shock. Food-grade polypropylene becomes fragile over time. The reason may also be a sharp temperature change, for example, if you put a hot product in the tray or washed it with boiling water before installing it in the chamber.
How much does the original container cost on average?
The price depends on the region and the seller's markup. On average, the cost of one freezer drawer Atlant varies from 600 to 1500 rubles. The upper, smaller trays are usually cheaper, while the lower, deeper trays are more expensive. Delivery can significantly affect the final amount.
Is it possible to glue a cracked container?
You can glue it, but the result will be temporary. Most adhesives do not withstand frost and become glassy, falling off in pieces. In addition, the glue can be toxic. If you decide to glue, use a special glue for plastic (for example, based on dichloroethane for ABS) and be sure to thoroughly rinse the product before use so that any remaining solvent does not get into the products.