The appearance of a puddle under the refrigerator or the accumulation of water on the bottom shelf is always an alarming signal that cannot be ignored. Owners of household appliances Beko often encounter this problem when the condensate drainage system stops functioning properly. Most often, the reason lies in a banal blockage of the channel through which moisture should go into a special tray.
In this article we will look in detail at where exactly drainage hole is located in various models of refrigerators Bekoand how to properly maintain it. Understanding the structure of the No Frost system and drip defrosting will help you quickly fix the problem on your own without calling an expensive technician.
Knowing the exact location of the elements of the water drainage system is critical to preventing food spoilage and mold growth. Regular checking of this unit extends the life of the compressor and maintains cooling efficiency.
The principle of operation of the moisture removal system
To understand where to look for the problem, you need to briefly understand the physics of the process. In modern refrigerators Beko, regardless of whether the system No Frost or drip defrosting is used, condensation forms. Moisture appears due to the temperature difference between the cold air inside the chamber and the warm air entering when the door is opened.
In the fridge compartment, water flows down the back wall into a groove, from where it enters the drainage channel. In a freezer with a system No Frost moisture is thawed from the evaporator during defrost cycles and is also discharged outside. If this path is clear, the water evaporates naturally, leaving no traces.
⚠️ Attention: An attempt to clean the channel with sharp metal objects without protection can lead to a puncture of the evaporator tube, which will lead to a freon leak and expensive repairs.
The key element here is namely drain pipe, which connects the internal groove to the external container for evaporation. Its diameter is small, which makes the system vulnerable to blockages.
Localization of the hole in the refrigerator compartment
Finding the water outlet point in the refrigerator compartment usually does not take much time if you know where to look. In most models Beko it is located at the bottom of the rear wall of the camera. This is a small round hole, often hidden behind a decorative plastic plug or located in the recess of the gutter.
Sometimes manufacturers hide the entrance to the drainage system behind removable shelves or vegetable drawers. If you visually do not see the hole, try carefully removing the lower containers. In some modifications Beko access to the drainage area is opened only after dismantling the bottom shelf.
Pay attention to the design of the rear panel. In models with a system Dynamic Air Cooling or similar air distribution technologies, the hole may be shifted to the side, closer to one of the corners, so as not to interfere with the flow of cold air.
- 🔍 Inspect the lower third of the rear wall for a small hole with a diameter of 5-10 mm.
- 🛒 Check whether access to drain a drawer for vegetables or a bottle holder.
- 🧩 Look for a removable plastic cover that can mask the technical unit.
It is also important to consider that in two-chamber models the location may differ from single-chamber ones. In tall refrigerators Beko the drain hole often has an elongated channel that goes deep into the body.
Where to look for the drain in the freezer
In the freezer compartment the situation is more complicated, since access to the internal mechanisms is often limited. In refrigerators Beko with a system No Frost the drain hole is located directly on the evaporator plate, hidden behind the back or side panel.
To get to it, in most cases, partial disassembly will be required. You will need to remove the plastic panel on the back of the freezer. It is under it that there is an evaporator and a chute for collecting melt water, which goes into the drainage tube.
⚠️ Attention: Before removing any panels in the freezer, be sure to disconnect the refrigerator from the power supply for at least 2-3 hours to completely defrost the ice.
Sometimes, depending from a specific series Beko, access to the drainage can be achieved through a technical hole at the bottom of the refrigerator body, from the outside. This is typical for models where the tube is led into a drip tray above the compressor without an internal bend.
Why is there no visible hole in the freezer?
In No Frost systems, water is removed from the evaporator, which is covered with a plastic casing. There should not be a visible hole on the wall of the chamber where you pour water - the channel is inside the technical compartment.
Instructions for clearing a clogged channel
If you find that the water is standing in the groove and does not go away, it means the channel is clogged. It could be a mixture of dust, food particles, mold, or ice blockage. To remove the blockage, you will need a soft wire, a bottle brush or a special cable, and warm water.
The cleaning process should be carried out carefully so as not to damage the inner walls of the tube. First, try rinsing the hole with warm (not hot!) water from a syringe or syringe without a needle. If the water does not drain, use the mechanical method.
☑️ Algorithm for cleaning the drainage
Insert the cleaning tool smoothly, without sudden movements. Scroll it to break the plug. After mechanical cleaning, flood the channel with water again to make sure that it flows freely into the tray at the bottom of the refrigerator (usually located above the compressor at the back).
- 💧 Use only warm water with a temperature of about 40-50 degrees Celsius.
- 🧹 Do not use sharp objects that can pierce the plastic.
- 🌬️ For complex blockages, you can use a rubber bulb to create pressure.
Typical causes of blockages and their prevention
Understanding the causes of problems will help prevent them in the future. In refrigerators Beko, as in any other equipment, blockages are most often organic in nature. Mold and mildew love the moist, dark environment of the drain tube, growing and blocking the flow of water.
Another common cause is small food particles, crumbs or packaging getting into the drain. Even a small piece of foil or polyethylene can become an anchor to which other contaminants stick, forming a dense plug.
| Type of blockage | Symptoms | Removal method |
|---|---|---|
| Ice plug | Water stands and freezes at the inlet | Defrosting the refrigerator (24 hours) |
| Organics (mold) | Unpleasant odor, mucus | Washing with soda solution or special. means |
| Garbage (crumbs) | Water drains slowly or stands still | Mechanical cleaning with a brush |
| Mixed type | Complete drainage blocking | Comprehensive cleaning and flushing with boiling water (carefully) |
For prevention, it is recommended to carry out preventive flushing of the drainage with warm water once every six months. Also monitor the temperature: if the temperature is set too low, the water in the channel may freeze, forming an ice jam.
Errors when servicing the drainage system
When trying to solve a problem on their own, users often make mistakes that aggravate the situation. The most common one is using excessive force when cleaning. Drainage tubes in refrigerators Beko are made of soft plastic, which is easy to damage.
Another mistake is ignoring the need to defrost if there is an ice plug. Mechanical picking of ice can lead to cracks in the plastic of the gutter. In such cases, the only correct solution is to let the unit stand turned off for a day.
Some users try to use chemicals to clean sink pipes. This is absolutely impossible to do. Aggressive substances can damage rubber seals and plastic elements of the system, as well as leave toxic traces near the products.
⚠️ Attention: If after all the procedures water continues to accumulate, the problem may not be a blockage, but a bend in the tube or a malfunction of the defrost heater. In this case, diagnosis by a specialist is required.
When specialist help is needed
Despite the simplicity of the design, there are situations when independent repair is impractical. If you have cleaned the channel, checked the integrity of the pipes, but water still remains inside, the problem may be deeper. The defrost sensor or the evaporator heating element in the models may have failed No Frost.
You also need a technician’s help if you accidentally damaged the system during cleaning. A puncture of the tube or a leak in the connections requires professional intervention and vacuuming of the system.
In cases where the refrigerator Beko is under warranty, any independent disassembly may result in refusal of free service. If you are not confident in your abilities, it is better to immediately contact an authorized service center.
- 🛠️ The tightness of the circuit is broken after your manipulations.
- ❄️ The freezing of the “fur coat” returns immediately after defrosting.
- 🔌 Extraneous sounds of operation are heard compressor or fan.
Is it possible to use boiling water for cleaning?
The use of boiling water is not recommended, since a sharp temperature change can deform the thin plastic tubes of the drainage system Beko. It is better to use hot tap water (about 60-70 degrees), it effectively melts grease and ice, but is safe for plastic.
How often should the drainage hole be cleaned?
Preventive cleaning is recommended every 6 months. However, if you notice that water begins to stagnate in the gutter earlier, the procedure should be performed immediately. The frequency depends on the humidity in the room and the frequency of opening the door.
What to do if water leaks onto the floor?
If there is water on the floor, it means that the drainage tray is full or cracked, or the tube has come off. Check the integrity of the plastic container above the compressor (bottom back). If it is intact, it means that the water does not have time to evaporate due to high humidity or lack of ventilation around the refrigerator.
Why does an unpleasant odor appear in the drainage?
An unpleasant odor indicates the growth of bacteria and mold in stagnant water. This often happens if the canal has not been cleaned for a long time. After mechanical cleaning, be sure to rinse the system with a soda solution or a special antibacterial agent for refrigerators.