Where is the drainage hole in a Samsung No Frost two-chamber refrigerator: search and cleaning

Two-chamber refrigerators Samsung No Frost famous for their automatic defrosting system, but even they are not immune to condensation accumulation. The drainage hole is a small but critical element that is responsible for draining melt water from the chamber. If it becomes clogged, moisture begins to accumulate at the bottom of the refrigerator, causing an unpleasant odor, mold or even leaks.

Many users face the problem: where exactly is this hole located in models with technology No Frost? Unlike drip refrigerators, where drainage is visible to the naked eye, in systems No Frost it is often hidden behind panels or in non-obvious places. In this article, we will analyze the location of the drainage hole in popular two-chamber models Samsung, and also give step-by-step instructions for cleaning it.

⚠️ Attention: The design of the drainage system may vary slightly depending on the year of manufacture and the specific model of the refrigerator. For accurate information, check the instructions for your appliance.

Why is it important to know the location of the drainage hole

The drainage hole is the “drain” of the refrigerator, which removes condensate formed during operation of the system. No Frost. If it becomes clogged, water cannot go into the pan and begins to accumulate:

• 💧 Puddles under the vegetable drawers - the first sign of a blockage. Water overflows over the edge and flows onto the lower shelf.
• 🍄 Mold and odor. Stagnant moisture creates an ideal environment for bacteria.
• ❄️ Ice on the back wall. In some models, clogged drainage leads to improper air circulation and freezing.
• 🔊 Unusual sounds. Gurgling or gurgling noises may indicate that water is having difficulty passing through a clogged hole.

Regular drain cleaning prevents these problems. But first you need to find it - and this is not always easy. In refrigerators Samsung No Frost the hole is often hidden behind decorative panels or built into the ventilation system.

Important: If you notice water under the refrigerator (not inside the chamber!), the problem may not be in the drainage hole, but in condensation tray or the tube leading to it. This requires separate diagnostics.

Where to look for the drainage hole in Samsung No Frost refrigerators

In two-chamber models Samsung s No Frost The drainage hole is usually located in freezer compartmentrather than in the refrigerator compartment. This is due to the peculiarities of the defrosting system: condensate flows down the back wall of the freezer and is discharged through the drain into the tray located at the back of the refrigerator.

To find it:

1. Unplug the refrigerator and empty the freezer compartment of food.
2. Remove all shelves and drawers - they may block access to the back wall.
3. Inspect the back panel of the freezer. In most models Samsung (for example, RL38, RB37, RS55**), the drainage hole is located:
   • 🔍 Under the evaporator (metal grille in the upper part of the rear wall).
   • 🔍 At the bottom of the rear panel, closer to the center or to the right (covered by a small plastic plug).

If the back panel is removable (attached with latches or screws), carefully remove it - the hole may be hidden under it.

In models with a system Twin Cooling Plus (two independent cooling systems), the drainage holes can be as in both the freezer and the refrigerator compartment. In this case, look for them symmetrically - under the back panels of both chambers.

What the drainage hole looks like: photos and diagrams

Externally, the drainage hole in refrigerators Samsung No Frost is:

• 🕳️ Small round hole with a diameter of 5–8 mm, often with plastic side.
• 🔗 Pipeleading from the hole down (can be visible when the back panel is removed).
• 🛡️ Plug or mesh —in some models the hole is covered with a fine grille to protect against debris.

Below is a table describing the location of the drainage in popular series Samsung:

If your model is not listed in the table, be guided by the general principle: drainage is always located. on the back wall of the freezer compartment, often near the fan or evaporator. In the refrigerator compartment, the hole is found only in models with Twin Cooling Plus.

How to distinguish Twin Cooling Plus from regular No Frost?

In refrigerators with Twin Cooling Plus there are two independent compressors (or one with two circuits), which allows you to separately regulate the temperature in the freezer and refrigerator. On the front panel of such models there are usually two buttons or displays for setting each zone. In the usual No Frost there is one. compressor and one air circulation system.

Step-by-step instructions for cleaning the drainage hole

If you find a hole, but the water still does not drain, most likely it is clogged. Cleaning takes 10-15 minutes and does not require special tools. You will need:

• 🧻 Cotton. sticks or toothpicks
• 💦 Warm water and soap
• 🧴 Hydrogen peroxide or vinegar (for disinfection)
• 🔧 Screwdriver (if you need to remove the panel)

Step 1. Preparation

Unplug the refrigerator and wait until it is completely defrosted (if there is ice). Remove all food and shelves that may interfere with access to the back wall.

Step 2. Access to the hole

If the drainage is hidden by a panel, carefully remove it. attached to plastic latches (press them with a screwdriver) or screws. In models RS55 and RS62 you may need to remove the inner back wall of the freezer.

Step 3. Cleaning

1. Rinse the hole. warm soapy water to remove grease and dirt.
2. Use a cotton swab or toothpick to clean the hole to a depth of 2-3 cm. Do not use metal objects —they can damage the plastic tube.
3. Pour into the hole 10-20 ml of hydrogen peroxide or vinegar to kill bacteria. Leave for 5 minutes, then rinse with water.

Step 4. Check

After cleaning, pour a little water into the drainage hole. If it flows freely, the blockage is eliminated. If the water is standing, repeat the procedure or check. data-i="143">for kinks. drainage tube for kinks.

Unplug the refrigerator|Empty the freezer|Remove the back panel (if necessary)|Clean the hole with a cotton swab|Wash with soapy water|Check the drain with water-->

⚠️ Attention: If after cleaning the drainage hole water continues to accumulate, the problem may be in frozen drain tube (it goes from the hole to the tray at the back of the refrigerator). In this case, defrosting the refrigerator for 12-24 hours or professional repair is required.

What to do if the drainage hole is not found

If you examined the back wall of the freezer, but did not find a hole, the following options are possible:

1. The hole is hidden under the removable panel. In models Samsung RS62A** and similar ones, the back wall of the freezer can be entirely removable. Carefully pry it up with a screwdriver (start from the top corner) and remove it.
2. Drainage is integrated into the ventilation system. In some refrigerators, condensate flows through special channels inside the walls, and the hole is located below, under compressor. In this case, cleaning requires disassembling the case. No Frost the condensate flows through special channels inside the walls, and the hole is located below, under the compressor. In this case, cleaning requires disassembling the case.
3. Your model does not have a traditional drainage. In rare cases (for example, in some Side-by-Side), condensate evaporates directly through the ventilation grilles without draining into the pan.

If you are not sure, refer to operating instructions (section "Defrosting system" or "Maintenance"). It can be found in electronic form on the website Samsung by model number (indicated on the sticker inside the refrigerator compartment).

An alternative search method: Pour some colored water (for example, with food coloring) on ​​the back wall of the freezer. Watch where it drains - this will help you locate the drainage hole.

Prevention of blockages: how to avoid problems with drainage

To prevent the drainage hole from becoming clogged, follow these simple rules:

• 🧼 Regular cleaning. Once every 2-3 months, wipe the back wall of the freezer with a soapy solution. This will prevent dirt from accumulating around the hole.
• 🥩 Proper storage of food. Pack meat, fish and other foods with strong odors in airtight containers. This will reduce the amount of fat and bacteria entering the drainage.
• ❄️ Defrost control. If a lot of ice forms in the freezer, defrost the refrigerator every 6-12 months (even if you have No Frost).
• 🌡️ Maintaining the temperature. Do not place the refrigerator in rooms with temperatures below +10°C or above +30°C - this disrupts the operation of the system No Frost and can lead to icing of the drain.

If you often encounter blockages, install protective mesh on the drainage hole (sold in home appliance parts stores). It will prevent large particles of debris from entering.

⚠️ Attention: Do not use aggressive chemicals (for example, chlorine or acetone) to clean the drainage. They can damage plastic parts and tubes, which will lead to leaks.

When to call a professional: signs of serious malfunctions

Not all problems with the drainage system can be solved on your own. Contact the service center if:

• 🚫 Water continues to accumulate even after cleaning the drain — this may indicate damage to the drainage tube or pan.
• ❄️ The drainage hole is frozen over and is not cleaned manually. The reason is a malfunction of the defrost system (defroster).
• 🔥 The refrigerator is overheating or it turns on/off frequently. This may be due to with a blockage in the system No Frostrequiring professional diagnostics.
• 💡 The display shows an error (for example, dH, dE or 22 in models with a display These codes often indicate drainage problems). or ventilation.

The cost of repairing the drainage system in service centers Samsung varies from 1,500 to 4,000 rubles (depending on the complexity) In most cases, the technicians:

• Clean. drain tube with a special tool.
• Replace the damaged condensate pan.
• Diagnose the operation of the system No Frost (fan, defrost heater, sensors).

Do not delay repairs! Prolonged drainage blockage can lead to to:

• Short circuit (if water gets on electrical components).
• Compressor breakdown due to increased load.
• Irreversible damage to the thermal insulation of the refrigerator.

FAQ: Frequently asked questions about the drainage hole in Samsung No Frost

Is it possible to clean the drainage hole without defrosting the refrigerator?

Technically yes, but it is less effective. Without defrosting, you will not be able to remove ice, which can block the hole. In addition, when the refrigerator is running, condensation will continue to accumulate, interfering with cleaning.

What to do if a piece of food gets into the drainage hole?

Carefully try to remove it with tweezers or with a toothpick. If debris has pushed deep into the tube, rinse the hole with warm water under pressure (for example, using a syringe without a needle. If this does not help, disassemble the back panel to access the drainage tube.

Why does the water still not go out after cleaning the drain?

Probable reasons:

• Clog in drain tube (goes from the hole to the pan).
• Kink or crack in the tube.
• Freezing of condensate in the tube (requires defrosting the refrigerator for 24 hours).
• Malfunction condensate pan (crack or displacement).

If the problem cannot be solved, call a technician.

How often should you clean the drainage hole?

Recommended frequency:

• 1 time in 3 months — if the refrigerator is used intensively (large family, frequent opening of doors).
• 1 time in 6 months —at standard load.
• once a year —if the refrigerator is new or rarely used.

Signs that cleaning is needed urgently: water at the bottom of the chamber, unpleasant odor, gurgling during operation.

Is it possible to use wire for cleaning drainage?

It is better to avoid metal objects - they can scratch the plastic tube or plug, which will lead to leaks. The best option: plastic toothpick, cotton. stick or soft silicone tube.