Where is the nameplate on the Atlant refrigerator: search and decoding data

The nameplate on the refrigerator Atlant is a small metal or plastic plate with unique information about the model, serial number and technical characteristics of the device. Without this data, it is impossible to select original spare parts, issue warranty repairs, or even properly dispose of equipment. However, finding a nameplate is not always easy: its location depends on the year of manufacture, modification and even the design of a particular model.

In this article you will find out exactly where the manufacturer Atlant places nameplates on refrigerators of different series - from classic MKhM and MKhK to modern NRM i NRB. We'll look at typical installation locations, provide photos of actual signs, and explain how to decipher key symbols. And if your refrigerator has already served its purpose, you will find instructions on how to remove the nameplate without damage for further use.

We warn you right away: some models (especially those released before 2010) may have a non-standard location of the plate. In such cases, only a visual inspection will help - but we will tell you what to pay attention to.

Why do you need a nameplate on the Atlant refrigerator

A nameplate is not just a sticker with numbers. It performs several critical functions:

• 🔧 Selection of spare parts: by model and serial number, service centers determine the compatibility of compressors, thermostats, seals and other parts. For example, a compressor from Atlant MKhM 1705-80 is not suitable for MKhM 1840-86, although outwardly they may look the same.
• 📄 Warranty service: without a serial number, dealers refuse free repairs. Even if the refrigerator is under warranty, the absence of a nameplate will automatically void it.
• ♻️ Disposal: the label indicates the type of refrigerant (for example, R600a or R134a), which is important for proper recycling of the equipment.
• ⚡ Electrical safety: the nameplate indicates voltage (220-240V), frequency (50 Hz) and power - this data is needed to connect to the network.

Without a nameplate, you risk buying an incompatible part, losing your warranty, or even violating recycling rules (which can result in a fine). For example, if you disable a refrigerator with refrigerant R600a (isobutane) and throw it away as ordinary garbage, this is equivalent to a violation of environmental legislation.

Typical locations of the nameplate on Atlant refrigerators

Manufacturer Atlant adheres to standard installation locations plates, but taking into account the design features of the models. Below are verified locations for 90% of the brand’s refrigerators.

1. Inside the refrigerator compartment (on the wall or ceiling)

The most common place for models MKhM, MKhK, NRM i NRB. The plate is usually located:

• 📍 On left or right side wall (closer to the top corner).
• 📍 On ceiling of the chamber (sometimes covered with a plastic panel).
• 📍 Behind vegetable drawer (less common, but found in older models).

To find the nameplate, just look at the camera in good lighting. If the sign is hidden under the panel, you can carefully pry it off with a plastic card (do not use metal objects - you will damage the coating!).

2. On the back wall of the refrigerator (outside)

Typical for models Atlant with a bottom freezer compartment (for example, MHM 1705, MHM 1840). The plate is attached:

• 📍 On upper part of the rear wall (under the compressor cover).
• 📍 Next to capacitor (grid).
• 📍 On mounting bracket compressor.

To inspect this place, unplug the refrigerator and carefully move it away from the wall. Be careful: the condenser may be hot if the refrigerator has been in operation recently.

3. Under the refrigerator door (on the body)

Found in models with an upper freezer compartment (MHC 2450, MHC 2442). The plate can be:

• 📍 On top bar body (visible when the door is open).
• 📍 On side wall (from the door hinge side).
• 📍 Under decorative overlay (glued or secured with latches).

4. In the freezer

Rarely, but it happens with two-chamber models (NRB 167, NRM 1206). Look for the sign:

• 📍 On internal wall (similar to the refrigerator compartment).
• 📍 Under plastic tray (you need to remove the ice box).

If you have examined all the listed places, but have not found the nameplate, check:

• 🔹 Bottom of the refrigerator (sometimes the plate is glued under the legs).
• 🔹 Packaging (if the refrigerator is new, the data may be duplicated on the box).
• 🔹 Warranty card (the model and serial number are often written there number).

What the Atlant nameplate looks like: photo and description

Name plates Atlant there are three types:

All types of nameplates indicate:

• 🔢 Model (for example, MHM 1705-80).
• 🔢 Serial number (from 8 to 12 characters).
• 🔢 Year of manufacture (sometimes in encrypted form, for example 12/20 —December 2020).
• 🔢 Technical data: voltage, power, type of refrigerant.

On models after 2018, the serial number can be duplicated in the form of a barcode - it can be scanned with a smartphone to quickly find spare parts.

How to decipher the data from the Atlant nameplate

The information on the plate is encrypted according to the manufacturer's standards. Let's look at the key designations using the example of a real nameplate:

MHM 1705-80
SN: X12345678
220-240V ~ 50Hz
R600a / 60g
12/20

• 📌 MHM 1705-80 — model:
  • MHM — series (freezer + refrigerator).
  • 1705 —volume (170 liters) and modification.
  • 80 —climate class (for moderate climates).
• 📌 CH: X12345678 — serial number (needed for warranty and spare parts).
• 📌 220-240V ~ 50Hz — power supply (standard for Russia).
• 📌 R600a / 60g — refrigerant (isobutane, 60 grams).
• 📌 12/20 — issue date (December 2020).

If your nameplate has other designations, for example T (tropical version) or INV (inverter compressor), their explanation can be found in the documentation for models. For convenience, we have collected the main codes in the table:

How to find out the year of manufacture by serial number?

On Atlant models after 2015, the year of manufacture is encrypted in the first digits of the serial number. For example, CH: 51234567 can mean 2026 (5th digit) and 1st week (12). read

What to do if the nameplate is missing or unreadable

If the plate is lost, erased or hidden under a layer of rust, there are several ways to restore the data:

1. 🔍 Check the documents:
   • Warranty card.
   • Receipt or invoice for purchase.
   • Product passport (if preserved).
2. 📷 Take a photo of the insides:
   • Remove the compressor (sometimes there is a duplicate model on it).
   • Check the stickers on the internal parts (for example, on the evaporator).
3. 💻 Contact the service center:
   • Send a photo of the refrigerator (exterior, compressor, freezer).
   • Indicate the approximate year of purchase.

🔧 Compare with analogues:

• Find the refrigerator on the Internet with the same design and characteristics.
• Use photo selection services (for example, Yandex.Collections).

If you plan to sell a refrigerator without a nameplate, honestly indicate this in the ad. Buyers often refuse equipment without documentation, as this complicates repair and maintenance.

How to remove a nameplate from an Atlant refrigerator without damage

If you need to remove the plate (for example, to replace or transfer to a new appliance), follow the instructions:

1. 🛠 Prepare the tools:
   • Plastic spatula or mediator.
   • Hair dryer (to heat the glue).
   • Alcohol or solvent (to remove residual glue).
• ⚠️ Turn off the refrigerator from the mains and wait until it will cool down.
• 🔥 Heat the plate with a plastic spatula with a hairdryer, starting from the corner. the area around the nameplate (if it is on glue). This will soften the adhesive.
• 📛 Carefully pry plate with a plastic spatula, starting from the corner.
• 🧴 Remove any remaining glue alcohol or acetone (do not use abrasives!).

If the nameplate is secured with rivets (typical for metal plates on older models), they can be drilled out with a drill with a thin drill (1.5-2 mm). After removal, the holes can be sealed with silicone.

⚠️ Attention: Do not use a knife or screwdriver to remove the nameplate - you risk scratching the enamel of the refrigerator or damaging the nameplate on the rivets after removal. fasten back without a special tool.

Common mistakes when searching and working with a nameplate

Even experienced users sometimes make mistakes that lead to data loss or damage to equipment. Here's what it is forbidden do:

• 🚫 Ignore the back wall: many look for the plate only inside the camera, although on 30% of models it is located on the back.
• 🚫 Peel off the sticker with your fingernails: this leads to erasing of the numbers. Use alcohol to carefully peel off.
• 🚫 Confuse model and serial number: the model (for example, MHM 1705) indicates the series, and the serial number (for example, X12345678) is unique for each refrigerator.
• 🚫 Throw away the old nameplate when selling equipment: the new owner may require it for warranty repairs.
• 🚫 Restore the serial number yourself: data falsification is equivalent to fraud during warranty service.

If you doubt the correctness of reading the data, take a clear photo of the nameplate and send it to the official service Atlant for verification, contacts can be found on the manufacturer's website.

⚠️ Attention: On some models (eg Atlant NRM 1206), the serial number may be punched on the metal plate of the compressor. If the plate is lost, inspect the compressor - sometimes this saves the situation.

FAQ: Frequently asked questions about nameplates for Atlant refrigerators

Is it possible to order a duplicate nameplate if the original is lost?

Officially, the manufacturer Atlant does not produce duplicate nameplates. However, you can:

1. Contact the service center with photographs of the refrigerator - they can restore the data from the database.
2. Make a sticker with data yourself (but it will not have legal force for warranty).

For warranty repairs, a duplicate is not suitable - an original is required plate.

What to do if the nameplate is painted over or rusted?

Try the following methods:

• 🧴 Wipe the plate white spirit or WD-40 (for rust).
• 📸 Take a photo of the nameplate from different angles with backlight - sometimes the numbers appear in the photo.
• 🔍 Use magnifying glass or a magnifying glass.

If the data is not readable, contact the service with a photo of the compressor and internal stickers - they can help identify the model.

Do I need to keep the nameplate after recycling the refrigerator?

No, after proper disposal (through specialized collection points) a nameplate is not required. However, if you are handing over the refrigerator for spare parts, the sign will help new owners select compatible parts.

In some regions, when recycling, they require you to present a product passport or a nameplate to confirm the type of refrigerant. Check this in advance at the collection point.

Can the refrigerator model be indicated without a nameplate?

Yes, sometimes the model is duplicated:

• On a sticker inside the door (for example, Atlant MHM 1705).
• On compressor (marking may contain the model).
• In electronic control unit (for modern models).

But the serial number is indicated only on the nameplate —it cannot be restored in other ways.

How to check the authenticity of the nameplate?

Fake plates are rare, but if you buy a used refrigerator, pay attention to:

• 🔹 Print quality: original nameplates have clear, not blurry symbols.
• 🔹 Material: metal plates should not bend under light pressure.
• 🔹 Model compliance: check the data with your passport or documentation.

If in doubt, ask the seller for a photo of the compressor - the model on it must match the nameplate.