Did you buy a used refrigerator Bosch, lost documents or simply can’t find the nameplate with the model? Without this number it is impossible to select spare parts, download instructions or clarify specifications. In this article we will show all possible placeswhere the manufacturer indicates the model - from obvious stickers to hidden engravings that only repairmen know about.
The difficulty is that Bosch several standards have changed over the past 20 years markings. For example, refrigerators KIN/KIR series (2010–2015) have a sign inside the chamber, and in new models Serie 8 (2020+) the data was transferred to the back wall. We have collected current information on all generations - taking into account the nuances for embedded, two-chamber and Side-by-Side systems.
If you are in a hurry, use a quick checklist at the end of the article. For difficult cases (erased stickers, missing documents), we have prepared alternative methods identification of the model - from scanning a QR code to contacting a service center.
Standard marking places: where to look in 90% of cases
The manufacturer Bosch adheres to the same rules for placing nameplates, but their location depends on refrigerator type and the year of manufacture. Let's start with the most obvious places that are worth checking first.
On single-chamber and two-chamber refrigerators (series KGN/KGE/KAN) the model plate is usually located:
- 📌 On the inner wall —on the right or left inside the refrigerator compartment, under the shelves. Often covered with an egg tray or container.
- 🔍 On the back wall - in the upper left corner (for models after 2018). May be hidden under a layer of dust.
- 📄 On the sticker under the door —for models with the system NoFrost (for example, Bosch KIN86AF30R).
For built-in refrigerators (Bosch KIV/KUL) look for markings:
- 🔧 On the door frame —top or bottom, under the decorative panel. You will need to carefully pry the plastic with a screwdriver.
- 📦 On the compressor box —if the refrigerator is not yet installed in a niche.
Important: on some models (for example, Bosch KAD90VI20R) there is a sign duplicated two places - inside the camera and on the back wall. If one sticker has worn off, check the second location.
Hidden places: where the manufacturer hides the model in non-obvious refrigerators
Sometimes the marking is located where no one expects to see it. This is typical for:
- 🔄 Models with the system VitaFresh —the plate can be hidden under the drawer for vegetables.
- ❄️ Refrigerators with LowFrost —look for the engraving on the metal plate of the freezer.
- 🔌 Smart refrigerators Bosch Serie 8 —data is duplicated in the electronic menu (more on this in the next section).
It is especially difficult to find a model for embedded systemswhere the manufacturer saves space. For example, in the series Bosch KUL15A50 the sign is located on the inside of the decorative door panel —it is visible only if you remove the facade. To do this:
- Disconnect the refrigerator from the mains.
- Carefully pry up the plastic panel at the top of the door (use a plastic pick so as not to scratch the surface).
- Illuminate it with a flashlight - a 3x5 cm plate is glued to a metal base.
In models Bosch KIN86AF30R and KAN92VI30R additional markings can be applied laser engraving on the compressor. To see it, you will need to:
- Move the refrigerator away from the wall (at least 50 cm).
- Wipe the back wall from dust.
- Put a bright flashlight at an angle - the engraving will become visible on the metal body of the compressor.
What to do if Is the sign erased?
If the inscription is blurred or painted over, try wiping it with a cotton swab dipped in alcohol. To engrave on metal, use chalk or a pencil - run it over the surface and take a photo of the imprint.
Digital methods: how to find out the model through the menu or mobile application
Modern refrigerators Bosch (series Serie 6 i Serie 8released after 2019) support electronic identification. This means that the model can be recognized without searching for plates - through the display or smartphone.
If your refrigerator is equipped with a touch screen (for example, Bosch KAN92VI30R), follow these steps:
- Press and hold the button
Menu(orSettings) for 5 seconds. - Go to the section
Device information(orDevice Info). - Scroll down - the model will be listed in line
Model NumberorType.
For refrigerators with support Bosch Home Connect (for example, Bosch KIN86AF30R):
- 📱 Install the application Home Connect on your smartphone.
- Connect the refrigerator to Wi-Fi (instructions in the section
Settings → Network connection). - The device profile in the application will indicate full model number and the serial number.
Please note: in some models (for example, Bosch KAD90VI20R) the menu may differ. If you do not find a section with information about the device, check:
- Availability of firmware updates (via
Settings → Software update). - Interface language - sometimes the names of menu items are translated incorrect.
Documents and packaging: where else can the model be indicated?
If the search on the case does not produce results, check the accompanying documents. Bosch duplicates information about the model in several places:
| Document | Where to look for the model | Designation example |
|---|---|---|
| Warranty card | Top right, in the "Technical data" section | Model: KIN86AF30R/01 |
| Operating instructions | On the first page or on cover | Type: KAN92VI30 |
| Receipt or delivery note | In the line with the name of the product | Bosch KGN39XL30R refrigerator |
| Refrigerator box | On the side sticker with barcode | Model No.: KUL15A50 |
Important: in the warranty card, the model may be indicated in shortened format (for example, KIN86AF30 instead of the full KIN86AF30R/01). To order spare parts or contact a service center, always use full number, including letters and numbers after the slash.
If the documents are lost, but the refrigerator was purchased in a large store (for example, M.Video, Eldorado), try:
- 🛒 Check your email - checks often come by email when ordering online.
- 📁 Look into your personal account on the store’s website - purchase history can be stored for years.
- 📞 Call the store support service with the order number (if saved).
☑️ Checking documents
How does the model differ from the serial number and why is it important
Many people confuse refrigerator model (for example, Bosch KIN86AF30R) and serial number (for example, FD987654321). The difference is critical:
- 🔖 Model is the type of device by which spare parts, instructions and accessories are selected.
- 🆔 Serial number is a unique identifier of your specific refrigerator, needed for warranty repairs or recall of a batch.
On the plate Bosch this data is usually located like this:
Bosch
Model: KAN92VI30R/01
Serial No.: FD123456789
Made in Germany
Where the serial number may be needed:
- 🔧 For warranty repairs —the service center checks the production date in the database.
- ⚠️ When batch recall —the manufacturer notifies the owners of specific series.
- 🔄 For authenticity check - using the serial number you can make sure that the refrigerator is not "gray".
If you need spare parts (for example, a door seal or a light bulb), the model is enough. For warranty work or database checks a serial number is required.
What to do if the model is not found: 3 alternative methods
If all of the above methods did not work, do not despair. Here three proven methods identify a refrigerator even without visible markings:
1. From the photo in the service center
Take a photo:
- 📸 Appearance —front panel with handles and display.
- 📸 Internal chamber —shelves, drawers, defrosting system.
- 📸 Back wall - compressor, tubes, stickers (if any).
Send a photo to the official service center Bosch (contacts on the website bosch-home.ru) or to an authorized workshop. Experts will determine the model based on its design features.
2. According to the characteristics
If you know main parameters the refrigerator, you can select a model based on:
- 📏 Dimensions (height × width × depth).
- ❄️ Type of defrosting (NoFrost, LowFrost, drip).
- 🔄 Number of chambers and their location (top/bottom, Side-by-Side).
- 🎨 Door color and material (stainless steel, white, black, glass).
Use this data on the sites:
- Official catalog Bosch (bosch-home.ru).
- Characteristics aggregators (for example, Market.Yandex.ru, Onliner.by).
3. By QR code (if saved)
On some models (for example, Bosch Serie 8there is QR codeon the back wall or inside the camera. Scan it with your smartphone - it can lead to a page with complete device data.
Typical mistakes when searching for a model: what to avoid
When searching for a model refrigerator Bosch users often make mistakes that lead to incorrect identification. Here are the most common:
1. They confuse the model with the serial number
For example, they mistake FD123456789 for the model, although it is a serial number. How to distinguish:
- ✅ Model always contains letters and numbers in the format KXX99XX99X (for example, KAN92VI30R).
- ❌ Serial number -only numbers and letters F or D at the beginning.
2. Ignore suffixes
The model may have additional designations after the slash, for example:
- KIN86AF30R/01 —version for Europe.
- KIN86AF30R/02 —version for Russia.
If you do not specify the suffix, the spare parts may not be suitable!
3. The year of manufacture is not taken into account
The same model could be produced in different modifications. For example, Bosch KGN39XL30 2018 and 2020 have different compressors. you can:
- By by the first digits of the serial number (for example, FD20... —2020).
- By sticker on the compressor (production date sometimes indicated there).
Quick checklist: how to find a model in 5 minutes
If you urgently need to find out the model, follow this algorithm:
☑️ Search for the Bosch model
If the refrigerator was purchased recently, start with documents - this is the most quick way. For older models, first inspect internal chamber and back wall.
If the model is still not found, use alternative methods from the section above or contact the service center with photographs.
Frequently asked questions about finding a Bosch refrigerator model
Is it possible to determine the model from a photo of the refrigerator?
Yes, but only if the photo shows unique elements: the location of the shelves, the type of display, the shape of the handles. Send photos to the service center. Bosch or to an authorized workshop. For accurate identification you will need photographs:
- The front panel with handles.
- The internal chamber (shelves, drawers).
- The rear wall (compressor, tubes).
Without a plate or serial number, the technician will only be able to name the model approximately.
What to do if the plate is erased or painted over?
Try the following methods:
- Wipe the plate with a cotton swab moistened in alcohol solution (do not use acetone!).
- Illuminate it with a flashlight at an angle - sometimes the inscription is visible through the light.
- If the sign is metal, apply it on it chalk or pencil, then take a photo - the engraving will appear.
- Check other places (back wall, compressor, documents).
If all else fails, contact the service center with photographs of the refrigerator.
How to find out the model if the refrigerator is built into the kitchen set?
For built-in models (Bosch KIV/KUL) proceed as follows:
- Carefully remove the decorative panel from the door (usually it is secured with latches).
- Check the door frame - the sign may be glued there.
- If the refrigerator is not yet installed in a niche, inspect the box compressor.
- Look at the documents - for built-in models, the model is always indicated in the warranty card.
If access to the refrigerator is limited, take a photo of the visible parts and send to the service center.
Is the model needed to order spare parts?
Yes, required. Without an accurate model, you risk purchasing an incompatible part. For example:
- Sealing rubber bands differ even for refrigerators of the same series (for example, KIN86AF30R and KIN86AF30).
- Compressors may have different connectors for connection.
- Light bulbs differ in base and voltage.
When ordering, always specify:
- Full model (with suffixes after the slash).
- Year of manufacture (if known).
- Serial number (for warranty parts).
Is it possible to find out the model by the serial number?
No, the serial number does not contain information about the modelIt is only needed for:
- Warranty repairs.
- Authenticity checks.
- Batch tracking (in case of recall).
However, by the serial number you can find out year of manufacture (the first numbers after the letters) and the country of origin (by the last characters). data-i="362">indicates that the refrigerator was released in FD201234567 indicates that the refrigerator was released in 2020.