Where to look at the Atlant refrigerator model: instructions with photos and secrets of the manufacturer

You bought a used refrigerator Atlant without documents or lost the warranty card, and now you can’t find the model to order spare parts or check the characteristics? Or maybe you need to check the year of manufacture before selling? This problem is familiar to many owners of Belarusian equipment - especially if the refrigerator has been moved or inherited. Fortunately, the manufacturer has provided several places where the factory markings are duplicated, and we have collected them all in one guide.

In this article you will find not only standard places (such as a sticker on the back wall), but also hidden dotswhich are not written about in the instructions. For example, where to look for the model on refrigerators Atlant over 10 years old or how to decipher the code if the label has been erased. And also proven ways to identify a model by serial number through official databases and what to do if there is no marking at all.

For convenience, we have added photos of real refrigerators with examples of the location of nameplates and a table of decoding of designations. If you're in a hurry, use the table of contents to jump straight to the section you need. And don’t forget to check list of typical errors when reading the model at the end of the article: this will save you hours of searching for spare parts using the wrong code.

1. Standard places on the refrigerator body

The manufacturer Atlant places a nameplate (nameplate) with the model in several fixed points. Their location depends on series and year of manufacture equipment. Let's start with the most obvious ones - those that 90% of the brand's refrigerators have.

Where to look first:

• 🔹 Back wall - the classic place. The label is affixed to a metal panel near the compressor (usually at the bottom left or right). Label size is approximately 5x7 cm, white or silver.
• 🔹 Inner wall of the chamber (right or left, upper corner). Relevant for models Atlant after 2015. The sticker is small (3x4 cm), can be transparent.
• 🔹 Refrigerator door —on the inside, on a plastic box. More often found on two-chamber models of the series MHM.
• 🔹 Top cover (if the refrigerator is free-standing, not built-in). The plate can be hidden under a plastic cover.

On the plate you will see several lines of text. The model is designated as Model, Model or simply by an abbreviation MHM/HM (for freezers). For example:

Atlant MXM 1708-100
Serial number: 1234567890
Production date: 05.2022

⚠️ Attention: On refrigerators Atlant older than 2010, the marking can be stamped directly on the metal of the back wall (without a sticker). Look for the engraving next to the compressor - it is often painted over with white paint.

2. Hidden places: where to look for a model if there is no label

If the standard labels are missing (torn off, erased or painted over during repair), do not despair. The manufacturer duplicates information in less obvious places. Here's where else you can find the model:

• 🔧 Under the plastic panel of the compressor. Unscrew 2-3 screws on the back wall (usually with a Phillips screwdriver) and remove the protective cover. A second label is often hidden under it.
• 📄 At the bottom of the refrigerator compartment. Take out all the shelves and drawers, shine a flashlight deep into them - sometimes the model is stamped on a plastic tray.
• 🔌 On the control unit (for models with an electronic display). Remove the top cover of the refrigerator: the model may be indicated on the board or next to the connectors.
• 🧊 In the freezer compartment —on the inner wall under the top shelf. Relevant for models of the series HM (freezers).

On refrigerators Atlant Soviet model (before 2000) the model was sometimes indicated on metal plate, bolted to the rear wall. If you find such a plate, but the numbers are not readable, try to photograph it at close range and enlarge the photo on the computer - sometimes this helps.

What to do if the model is partially erased?

If only the beginning of the code is visible (for example, "MHM 170..."), try to find the full version in the database service centers. To do this, it is enough to know the series (the first 3-4 characters) and the approximate year of manufacture. A photo of the label will also help - some workshops decipher the model by font and text location.

⚠️ Attention: On some models Atlant (for example, MXM 2832-080), the serial number and model are indicated on one line through a slash. Don't confuse them! The model always begins with the letters MHM, HM or MX.

3. How to identify a model by serial number

If you only found the serial number (usually 10-12 digits), it can be used to search for the model through official sources. Here's how to do it:

1. Write down the serial number completely. Example: ATL2205123456.
2. The first 2-4 digits are often designated year and month of production. For example, 2205 — May 2022.
3. Go to the website Atlant (section "Service" → "Warranty check") or use the feedback form. Indicate the serial number - you will receive a model and production date in response.

An alternative way is to contact service center with a photo of the plate (even if the model is not visible). Masters can determine it by:

• 🔍 Configuration of shelves and drawers (take a photo of the interior space).
• 📏 Dimensions of the refrigerator (measure the height, width and depth).
• 🎨 The color and design of the door (for example, models Atlant series New Wave have a characteristic pattern).

⚠️ Attention: Some sellers on the secondary market indicate in advertisements a “suitable” model, based only on external similarity. Always check the serial number - this will save you from buying non-original spare parts.

4. Documents and packaging: where else can the model be

If the refrigerator was purchased new, the model must be indicated in the accompanying documents. Check:

If the documents are lost, but the refrigerator was purchased in a large chain (for example, M.Video, Eldorado), try to recover the receipt using your loyalty card or order number. The model must be indicated in the electronic receipt.

Tip: Take a photo of all the documents found and save the photo in the cloud (for example, Google Drive). This will save you from problems during future repairs or sales of equipment.

5. Online services for checking the model

If the physical inspection does not help, use online tools. We tested 3 reliable methods:

1. Official website Atlant:
   • Go to the section "Service".
   • Select "Warranty check" or "Selection of spare parts."
   • Enter the serial number - the system will show the model and production date.
2. Database All-ZIP (for spare parts):
   • Upload a photo of the plate or enter visible characters.
   • The service will compare them with the database and will offer possible model options.

Forums of masters (for example, MasterGrad or Remont-Holoda):

• Upload a photo of the refrigerator (exterior + internal structure).
• Experienced repairmen will help identify the model by design features.

⚠️ Attention: On aggregator sites (such as Yandex Market), models may be indicated inaccurately. Always check the data with official sources or photos of the real label.

Serial number (in full)

Photo of plate (if any)

Year of purchase (approximately)

Refrigerator type (single/double chamber)-->

6. models: what the letters and numbers mean

The model range Atlant has a clear designation structure. Having understood it, you can even determine the main characteristics of the refrigerator from a partially erased label. Here's how to decipher the code:

Symbols	Meaning	Example
MHM	Freezing and refrigeration plant (two-chamber)	MHM 1708-100
HM	Refrigerator freezer (single-chamber)	XM 4021-000
First 2 digits after letters	Total volume in liters (rounded)	17 v MHM 1708 = ~170 l
Last 3 digits	Modification (color, control type, complete set)	-100 —basic version, -101 —with display

For example, model Atlant MXM 2832-080 is deciphered as follows:

• MHM — two-chamber refrigerator;
• 28 — total volume ~280 liters;
• 32 — series code (in this case New Volna);
• -080 - modification with mechanical control and white color.

Knowing this logic, you can “restore” the model even if only part of the code is visible. For example, if the label reads MHM 17..., then this is definitely a refrigerator with a volume of ~170 liters.

7. Typical errors when determining the model.

Even experienced users sometimes confuse the model with the serial number or other codes. Here are the most common mistakes and how to avoid them:

• ❌ The model is mixed up with the spare part number. Stickers with part codes (for example, 600001234) are often located next to the main plate, but are not related to the refrigerator model.
• ❌ They took incomplete code. The model always consists of letters and numbers (for example, MHM 1708-100). data-i="234">MXM 1708-100 1708, this is incomplete information.
• ❌ Ignored the hyphen and numbers after it. In the model MXM 2832-080 part -080 indicates a modification - without it you will receive incorrect spare parts.
• ❌ Trust the seller's word. On the secondary market they often indicate a “similar” model. Always ask for a photo of the plate!

⚠️ Attention: On some models Atlant (for example, MHM 1840-60) after the main code there is an additional index (for example, /TO or /WITHIt indicates the color (K - cream, C - silver) and must be taken into account when ordering doors or panels.

If you doubt the correctness of a certain model, check its characteristics with the actual parameters of your refrigerator (volume, number of chambers, type of control). For example, the model MHM 1708 cannot be volume). 300 liters is an obvious mistake.

8. What to do if the model cannot be determined

In rare cases (for example, after a makeshift repair or a fire), all labels and documents may be missing: Here's what to do in such a situation:

1. Take a photo of the refrigerator from all sides, including the internal structure of the cameras. Please pay attention:
   • The location of the shelves and drawers;
   • The type of compressor (the brand is indicated on it);
   • Color and door design.

Measure the dimensions (height × width × depth) and the volume of the chambers. This will help narrow the range of possible models.

Contact the service center Atlant with a photo and description. Attach a photo of the compressor - according to its model (for example, Danfoss NL10) you can determine compatible refrigerators.

Use groups on social networks (for example, "Repair of Atlant refrigerators" on VKontakte). possible options.

⚠️ Attention: If you plan to buy spare parts by eye, be prepared for the fact that they may not fit. For example, externally identical door seals for models MHM 2832 and MHM 2835 have different lengths.

As a last resort, you can order departure of a technician for identificationThis will cost 500–1000 rubles, but will save time and money on unsuitable parts.

FAQ: Frequently asked questions about Atlant refrigerator models

Is it possible to identify the model from a photo? refrigerator?

Yes, but only if the photo shows a label with markings or unique design features (for example, the location of the shelves in the freezer) For accurate identification, it is better to photograph:

• The back wall (with the compressor);
• The internal space of both. cameras;
• Control panel (if there is a display).

Upload the photo to the service center Atlant or to specialized forums - they will help with decoding.

What to do if the model on the label does not match the documents?

This happens if the refrigerator was repainted or the plate was changed (for example, after repair). In this case:

1. Check the serial number - it must match in the documents and on the case.
2. Compare the characteristics (volume, number of chambers) with the passport.
3. If the discrepancies are significant, contact the service center with a photo of both sources.

Sometimes differences in the model are explained restyling —for example, MHM 1708-100 and MHM 1708-101 may differ only in the color of the panel.

How to find out the year of manufacture of the Atlant refrigerator?

The year of manufacture is encrypted in the serial number. Usually these are the first 2–4 digits:

• 2205... — May 2022;
• 1812... —December 2018;
• 9... — 2009 (for older models).

Also, the year can be determined by design:

• Before 2010 - metal handles, rounded;
• 2010–2015 - plastic handles with chrome inserts;
• After 2015 - integrated (hidden) handles.

Where to look for a model on Atlant built-in refrigerators?

For built-in models (series MHM-V) the plate is located:

• On top cover (under the decorative panel);
• On side wall (visible when the refrigerator is pulled out);
• On bottom (you need to remove the bottom panel).

Also, the model is duplicated on mounting frame (metal frame for embedding).

Is it possible to find out from the model which refrigerant is used?

Yes. All refrigerators Atlant after 2015 operate on isobutane (R600a). In models before 2010, it could be used R134a or R12 (in very old ones). To find out exactly:

1. Look at the plate - there may be an indication there Refrigerant: R600a.
2. Check the year of manufacture (see previous question).
3. Contact the service - the technicians will determine the type of refrigerant according compressor.

⚠️ Important: Refrigerant R600a flammable! Repairs require special equipment.