Owners of German equipment are often faced with the need to accurately identify their equipment when ordering spare parts, searching for instructions or contacting a service center. The brand Liebherr is famous for its reliability, but the variety of series and modifications requires a careful approach to labeling. To make a mistake in one digit of the article means to receive an unsuitable filter or seal, which will lead to unnecessary waste of time and money.
Finding the identification number is not always obvious, since manufacturers place information plates in different places depending on the year of manufacture and type of unit design. In this article, we will analyze in detail all the possible locations where it may be data shieldand learn how to correctly decipher complex alphanumeric codes.
Understanding the marking system Liebherr allows you not only to quickly find the necessary components, but also determine the year of manufacture of the device, which is critical when purchasing used equipment or checking the warranty. Let's look at the main places where you should look first.
Main information sticker inside the chamber
The most common place for placing the nameplate on most models of refrigerators and freezers Liebherr is the inner wall of the refrigerator compartment. Usually it is located on the left side wall, closer to the top, or on the central partition if we are talking about two-chamber models. The sticker is made of durable material that is resistant to moisture and temperature changes, so it rarely comes off on its own.
This is where the full technical data sheet device is contained, including the type of refrigerant, chamber volume, climate class and, most importantly, the article number (Type) and product number (No.). If you plan to order original parts such as shelves or trays, this is the part number you will need. In some older models, the sticker may have been silver with black text, while in modern versions it is often white or light gray with blue logo elements.
Carefully inspect the surface of the sticker: sometimes an additional sticker from the distributor or store may be pasted on top of the main information, hiding part of the data. Carefully check the edges of the main label. It is also worth noting that for built-in models, access to this area may be limited by installed furniture, which requires temporary dismantling of the facade or extension of the unit.
⚠️ Attention: Never use sharp objects (knives, blades) to scrape dirt from the sticker. Damage to the top layer may make the barcode unreadable for service center scanners.
Location of the nameplate on the body and door
If the sticker could not be found inside the camera, the next step is to inspect the outer perimeter of the device. For many models Liebherr, especially those released in the last 10-15 years, duplicate information or the main nameplate is placed on the end of the door. To see it, you need to fully open the refrigerator door and look at the vertical end facing the hinges or, conversely, the handle.
There are also placement options on the back wall of the case, although this is less convenient for the user. This approach is typical for some industrial series or specific built-in lines, where the side walls are hidden by a niche. In this case, to access the data, you will have to move the refrigerator away from the wall, which requires compliance with safety rules when moving heavy equipment.
Sometimes, especially in models with the system NoFrost, the sticker may be partially hidden by structural elements, for example, drawer slides or decorative strips. Carefully inspect all accessible surfaces. If the sticker is erased or damaged, look for an engraving on the metal, which is sometimes applied next to the main nameplate to back up key data.
Documentation and warranty card
When physical access to the stickers is difficult or they are damaged, the documentation supplied with the device comes to the rescue. The warranty card or product passport always contains the exact model and serial number of the unit you purchased. These documents are legal confirmation of the purchase and are often required by service engineers even more than a sticker on the case.
Also pay attention to the sales receipt or invoice if the purchase was made recently. In large electronics chains, receipts often indicate the full item number of the product, including color code and regional specification. This is especially useful if you are ordering a door or control panel where color and texture are important.
If paper versions of documents are lost, check your email. When purchasing online, the order confirmation with the full model name remains indefinitely archived. A digital trail often turns out to be more reliable than a paper one, which can get lost among other papers over the years of use.
| Document type | Where to look for the model | Data reliability |
|---|---|---|
| Warranty card | First page, column "Model" | High |
| Instructions (Manual) | Last page or insert | Medium (indicates the series) |
| Sales receipt | Item description | High |
| Packaging box | Side edge, barcode | High (if preserved) |
Decoding of the article and number products
Having found the sticker, you will see several lines of numbers and letters. The most important of them is Type (Type) or Art.Nr. (Article). U Liebherr this code usually consists of 9-11 characters and begins with numbers, followed by letters indicating the color and type of control. For example, the code CBNes 4856 will tell an experienced technician about the type of compressor, cooling system and handle design.
The second key line is No. (Product number) or Fert.-Nr. (Production number). This is the unique serial number for your specific copy. It is needed to track the repair history, check the warranty status and order customized parts that could change in different production batches of the same model.
The sticker also indicates Prod.-Jahr or simply the year of manufacture. Knowing the year can help you determine whether your refrigerator is an old or new line, which is important when searching for compatible water filters or SmartDeviceBox systems. Sometimes the year is encoded in the first digits of the serial number, and a special calculator is required to decipher it.
The secret of the year encoding
In early Liebherr models, the year of manufacture could often be determined from the first two digits after the letter prefix in the serial number, however in modern series (after 2010) a separate field or a more complex algorithm is used, depending on manufacturer (Germany, Austria, Malaysia).
Specifics of built-in and wine cabinets
Search for markings in built-in equipment Liebherr has its own characteristics, dictated by aesthetics and design. Since the side walls of such models are often hidden by the kitchen unit, and the internal space is optimized, manufacturers place the nameplate in hard-to-reach but standardized places. Often the sticker is located on the inner end of the door, but sometimes it is hidden under a removable decorative panel of the base.
For wine cabinets WK i WT series it is typical to place the label on the inside of the door, often in its lower part, so as not to disturb the visual overview of the wine collection. In some professional series, the sign may be placed on the back wall, and to access it you need to remove the rear protective grille, which is best left to a specialist.
If you encounter difficulty accessing the sticker in a built-in model, do not try to dismantle the facade yourself without studying the fastening diagram. Improper door removal may result in damage to the hinges or façade. In such cases, it is better to use the application Liebherr HomeConnectif the model supports this function: the digital profile of the device in the application often contains complete information about the model.
⚠️ Attention: When looking for a sticker in a built-in refrigerator, make sure that the unit is securely fixed. Shifting the body when trying to look behind it can disrupt the installation geometry and damage the kitchen furniture.
What to do if the sticker is lost or unreadable
The situation when the nameplate is hopelessly damaged, worn out or torn off by the previous owners is not as rare as we would like. In this case, direct identification by number becomes impossible, and you have to resort to indirect methods. First of all, evaluate the appearance and functionality: the presence of a display, the type of handle, the location of control buttons and the internal configuration of the shelves.
Take high-quality photographs of the refrigerator from the front, inside the chambers, control panel and compressor compartment (bottom rear). These images can be sent to the official support service Liebherr or specialized forums. Experts can often identify a model by characteristic design details that vary from series to series.
You can also try to find a model through compressor. If you get to the compressor (usually at the bottom at the back), it also has a sticker with a number on it. Although this will not give the exact model of the refrigerator, it will narrow the search to a few possible options, since one type of compressor is rarely installed on dozens of different models.
☑️ Algorithm of actions in case of a lost sticker
Frequent errors when identification
Users often confuse the refrigerator model with the spare part number or color code. There may be many numbers on the sticker, and an inexperienced person may write down the wrong row. For example, the code EAN (barcode for sale in a store) differs from the factory one Type. Ordering by EAN code may result in you finding the product in an online store, but technically it will not be compatible with your device revision.
Another common mistake is ignoring letter suffixes at the end of the article. Models ...-20 and ...-21 may look identical, but differ in the type of refrigerant or compressor voltage. For Liebherrwhere engineering precision is high, such differences are critical when ordering electronics.
You should not rely only on memory or a name that you came up with yourself, for example, “Liebherr with display on the door.” In catalogs, such equipment may appear completely differently. Always double-check the data with several sources if the sticker is in doubt.
Use of digital services for search
Modern technologies make it possible to simplify the search process. The official website Liebherr has a support section, where by partially entering the number you can find the full specification. In addition, there are databases of spare parts that, based on photographs of the internal layout, can suggest suitable models.
Mobile application Liebherr HomeConnect (for supported models) automatically reads the data the first time you connect to Wi-Fi. If your refrigerator is “smart,” simply connect it to the network, and the device profile on your smartphone will display the exact model name and all technical specifications. This is the fastest way and does not require physical inspection of hard-to-reach places.
If you use voice assistants or smart home systems, check the history of adding devices. Often the full identifier that was used when initially setting up the gadget is stored there.
How to distinguish an original sticker from a fake one?
Original stickers Liebherr have clear printing, smooth edges and often contain security elements (microtext or hologram on new models). Counterfeit labels may be crooked, have blurry font, or have a different background color. However, the main difference is the correspondence of the data: if the sticker looks new on an old refrigerator, this is a reason to check.
Is it possible to restore a worn-out sticker?
It is impossible to physically restore the factory sticker, but you can request a duplicate of the data from the service center, providing them with a photo of the compressor and the approximate date of purchase. Some owners print out a copy of the found data and laminate it, placing it next to the original for convenience in the future.
Does the sales region affect the model?
Yes, Liebherr it produces equipment with different articles for different markets (Europe, Asia, CIS). Differences may be in the menu language, delivery package, and even thermostat settings. Therefore, when searching for spare parts, it is important to consider for which region the refrigerator was originally intended.
Where to find instructions if only the series is known?
If you only know the series (for example, BNes), you can download the general instructions for this series from the official website. Basic control principles, error codes and temperature settings are usually the same for all models within the same series.
Why do you need a chassis number?
The chassis number (if specified separately) is important for large household appliances in logistics, but for the user it is the Type i No. products. However, when ordering large-sized replacement units, such as the entire refrigeration unit assembly, additional data about the chassis may be requested.