Searching for identification data of household appliances often becomes necessary at the most inopportune moment, for example, when filling out a warranty card or calling a technician. For owners of products from the Belarusian plant Atlant this process is not always obvious, since the location of the plates may vary depending on the year of manufacture and model of the unit. Serial number is a unique identifier of your device, without which official service is impossible.
Unlike some other manufacturers, who can duplicate information on the internal camera, engineers Minsk Refrigerator Plant most often place the main markings on the outer surfaces of the case. It is important to understand the difference between the model number, which indicates characteristics, and the individual product number, which is assigned to a specific unit on the assembly line. It is the second code that is required to register the warranty and order spare parts.
Sometimes owners are faced with a situation where the sticker is damaged or worn out, which significantly complicates the identification procedure. In such cases, it is necessary to know alternative locations or be able to read information from the technical documentation that came with the kit. Below we will analyze in detail all possible search options and methods for verifying the authenticity of data.
⚠️ Attention: Never try to re-stick the factory identification plate to another place yourself. This action may be regarded by the service center as an attempt to hide the history of the device, which will lead to refusal of warranty repair.
Main locations of the nameplate
The most common place where the manufacturer places the nameplate is the back wall of the refrigerator. It is usually a silver or white sticker with black text containing the brand logo and a set of numbers. In most two-chamber models, this label can be found in the upper or middle part of the rear panel, closer to the compressor.
However, in modern lines, especially built-in appliances or models with a system No Frost, the location can be changed for ease of installation. If there is nothing behind you, carefully inspect the side walls of the case. Sometimes, in order not to disturb the aesthetics of the visible part, engineers move the marking closer to the bottom or hide it behind the protrusions of the case where the compressor unit is mounted.
- 📍 The rear metal wall is a classic location for 90% of all models.
- 📍 The inner wall of the refrigeration chamber is less common, usually to the left or right of shelves.
- 📍 The end of the door or the inside of the door - typical for some compact models.
- 📍 The lower part of the body behind the decorative grille - relevant for built-in appliances.
It is worth noting that on some older models released in the early 2000s, it could do not use a sticker, but a metal plate secured with rivets (rivets). Such signs are more durable, but over time they can oxidize, making the text difficult to read. In this case, it is recommended to use a flashlight and a magnifying glass to read the data.
How to distinguish the serial number from the model
The nameplate contains many numbers and letters that are easy for an untrained user to confuse. Refrigerator model is a code that describes design features: height, type of refrigerant, number of compressors and climate class. The serial number is a unique code for a specific instance that is never repeated.
Usually the model is indicated by an abbreviation starting with letters, for example, MX, KSH or CM. They are followed by a series of numbers separated by a dash. The serial number is most often a long sequence of numbers, sometimes with an alphabetic prefix, which indicates the year or month of production. It is important not to confuse this data when calling support.
⚠️ Attention: When ordering spare parts through online stores, be sure to indicate the serial number, not the model. Parts may vary depending on the date of assembly, even if the refrigerators look identical in appearance.
For accurate identification, you can use the designation correspondence table, which will help you navigate the markings:
| Designation on the plate | What it means | Example value |
|---|---|---|
| Model / Model | Size and equipment | Atlant XM-4008-022 |
| S/N or Ser. No. | Unique product number | 5203456789 |
| Date of Mfg | Date of production | 12.2023 |
| Refrigerant | Refrigerant type | R600a |
Deciphering the Atlant model code
Understanding the structure of the model number allows the owner to learn more about his device than what is written in the instructions. The model code is not random: each number and letter carries specific technical information. This is especially useful when buying used equipment or selecting analogues. Atlant is not accidental: each number and letter carries specific technical information. This is especially useful when purchasing used equipment or selecting analogues.
The first letters indicate the type of refrigerator: M means a household refrigerator with a freezer, MH - freezer, K - refrigeration chamber. The numbers that follow them indicate the useful volume and design features. For example, the number 4 at the beginning of the number series often indicates a two-chamber refrigerator with a bottom freezer.
- 🔢 The first number after the letters is the type of refrigerator (1-single-chamber, 2-two-chamber with top freezer, 3-two-chamber with bottom freezer).
- 🔢 The second and third digits are the conditional volume of the chamber (not the exact liter, but the class).
- 🔢 The fourth digit is the energy consumption class and type controls.
- 🔢 The last numbers are the color and design of the handle.
Knowing these nuances, you can easily determine whether a particular model is suitable for you in terms of size and functionality, simply by looking at its name. This also helps when searching for compatible accessories, such as shelves or drawers, which may be universal for certain series.
What does the letter 'E' at the end of the model mean?
The letter 'E' in the model designation (for example, 4008-022E) often indicates an export version or a modified configuration for these markets. Such models may have differences in the control panel or the color of the plastic.
Search for the number in documents and receipts
If physical access to the back wall of the refrigerator is difficult due to tight installation against the wall or in a niche of the kitchen unit, do not rush to dismantle the furniture. Primary information can be found in the accompanying documents that are issued upon purchase. This is the fastest and safest way.
The serial number must be entered by the seller by hand or printed in a special section. Also, this data is often duplicated on a sales receipt or invoice, especially if the purchase was made at a large electronics chain store. In electronic receipts, information can be found in the store’s personal account. warranty card The serial number must be entered by the seller by hand or printed in a special section. Also, this data is often duplicated on a sales receipt or invoice, especially if the purchase was made at a large electronics chain store. Information on electronic receipts can be found in the store’s personal account.
The technical passport included in the kit also contains unique data, although sometimes it may indicate the batch number and not the specific product. Therefore, priority should be given to the warranty card, where the seller puts a stamp and signature, recording the sale of a specific unit.
⚠️ Attention: Keep receipts and warranty cards for at least 3-5 years. It is recommended to store digital copies of documents in cloud storage in case of loss of paper media.
Features of marking built-in models
For owners of built-in equipment Atlant finding a nameplate can be the most difficult thing. The design of such refrigerators involves installation in a furniture niche, which makes the back wall inaccessible without completely removing the device from the set. Manufacturers took this nuance into account and provided alternative places for marking.
Often the data sticker is placed on the end of the refrigerator door or on the inside surface of the door, closer to the hinges. In some cases, the label can be found on the plinth panel at the bottom of the device, which can be removed without removing the refrigerator itself. This allows identification without disturbing the installation of the kitchen.
☑️ Check before calling the technician
If the refrigerator is already installed, try to look into the gap between the door and the furniture body. Sometimes, to read the information, it is enough to simply open the door slightly and use the smartphone flashlight, directing the light at an angle. The main thing is not to damage the furniture facades when trying to get the unit.
What to do if the plate is lost or unreadable
Situations when the factory sticker fades, wears off or comes off are not uncommon, especially for equipment that is already several years old. In this case, it becomes visually impossible to obtain information about the serial number, but this does not mean that the data is lost forever.
Modern refrigerators Atlant are equipped with electronic control units that store information about the configuration of the device. However, for the average user, access to this data through the display interface is usually closed. The only reliable way is to contact an authorized service center.
During diagnostics, the technician can read data from the control board or determine the model by internal components (compressor, evaporator). Also, if you bought the equipment officially, the serial number data is saved in the store database. It is enough to contact the retailer's support service with the date of purchase and delivery address.
- 📞 Contact the store where the purchase was made, requesting a copy of the receipt with the serial number.
- 🛠 Call a service center specialist to diagnose and identify units.
- 📄 Check your email for receipts or warranty registrations.
- 📸 Remember if you took a photo of the equipment immediately after purchase for reviews or social networks.
Authentication and Warranty
Having a readable serial number is not only a matter of convenience, but also a necessity to ensure warranty eligibility. Official service centers Atlant check each case of contact through a single database, checking the date of sale and model of the device.
If there is no number or it does not match the database (for example, when purchasing second-hand equipment or “gray” imports), repairs under warranty may be refused. Therefore, when purchasing a used refrigerator, always request documents and check the correspondence of the numbers on the case and in the passport.
Mechanical damage, traces of opening or improper operation (which can also be evidenced by indirect signs on the case) are grounds for paid repairs, regardless of the availability of the serial number.
Is it possible to restore the serial number if the sticker has been erased?
It is impossible to restore the number yourself. The only option is to find it in the documents (warranty card, receipt, sales contract). If there are no documents, the exact number can only be determined by a service center technician when opening and checking the markings on internal components, such as the compressor or control board, if it is duplicated there.
Does the absence of a nameplate affect the cost of the refrigerator when selling?
Yes, the absence of a nameplate with the serial number and model significantly reduces the liquidity of the equipment. Buyers of used goods fear that the refrigerator may have been stolen, recovered from a serious accident, or is counterfeit. It is extremely difficult to prove its legality and service history without a number.
Where is the serial number for two-compressor Atlant models?
For two-compressor models, the location of the nameplate is no different from single-compressor models. It is also located on the back wall, the inner wall of the chamber or on the door. The number of compressors does not affect the placement of the marking plate, since it identifies the entire cabinet, and not individual units.
What to do if the numbers in the documents and on the refrigerator are different?
This is a critical situation, indicating a possible replacement of the housing, re-sticking the plate, or a seller’s mistake when issuing documents. For warranty purposes this is a problem. You must immediately contact the store where the purchase was made to clarify the circumstances and make corrections to the warranty card with the organization’s seal.