Cleaning the interior of the Pozis refrigerator is not just putting things in order, but a necessary procedure for maintaining the correct temperature and freshness of food. Owners often encounter difficulties when trying to remove glass shelves or plastic containers, for fear of damaging fragile elements or compromising the integrity of the guides. Understanding the design of your model allows you to avoid awkward situations when the shelf gets stuck halfway or breaks on the door.
Modern models, such as Pozis RK-139 or older series Sviyagamay have different types of fastenings, which requires an individual approach to each detail. Incorrect force may cause the plastic stops to break or the glass to slide off. In this material, we will analyze in detail the algorithm of actions for the safe removal of all types of internal elements.
Before starting the active cleaning phase, it is important to prepare the workspace around the refrigerator. You will need some free space to place the removed shelves and a soft cloth to cover the floor in case a drop of water falls or heavy glass slips. Safety when working with glass surfaces comes first, so do not ignore preparation.
⚠️ Attention: Before you begin For any work to remove internal components, be sure to disconnect the refrigerator from the power supply. This will prevent the compressor or lighting from accidentally turning on while manipulating wiring or sensors if they are affected.
Preparation for dismantling internal elements
The first step is to completely unload the refrigerator compartment. The presence of products, even in small quantities, significantly makes the structure heavier and shifts the center of gravity, which increases the risk of the shelf falling when removed. Empty all drawers and remove products from the upper levels to gain unobstructed access to the fasteners.
Next, you need to assess the type of contamination and the extent to which complete dismantling is necessary. If only surface wiping is required, moving the shelf deeper may be sufficient. However, for high-quality washing using warm water and detergents complete removal is a prerequisite. Warm water should not hit the cold glass abruptly to avoid temperature shock.
- 🧊 Clear the shelf of all products and packaging.
- 🔌 Unplug the appliance for safety.
- 🧼 Prepare a basin with warm water and soft rags.
- 🧤 Wear rubber gloves to protect your hands from cold and chemicals.
☑️ Preparing to wash the refrigerator
Pay attention to the temperature conditions. If the refrigerator has just been running, the glass may be very cold. Sharp contact with warm water can lead to the formation of microcracks. Let the chamber warm up a little while open before you begin to remove the glass elements.
Design of shelves and types of fastenings in Pozis models
Pozis brand refrigerators produced at the Sergo Plant are equipped with different types of shelves depending on the year of manufacture and series. The most common are tempered glass shelves with metal edging and plastic grilles. Understanding what type of mounting your model uses is critical to successful disassembly.
Most modern models use shelves supported by plastic stops or metal rails built into the back wall. Some models, for example, series Sviyaga, may have shelves that are simply inserted into grooves without additional clamps, but have special protrusionsthat cling to the side.
| Type shelves | Fixing mechanism | Difficulty of removal |
|---|---|---|
| Tempered glass | Support on plastic stops | Low |
| Metal grille | Inlay in the grooves of the body | Medium |
| Door balcony | Plastic latches | High |
| Box for vegetables | Guide rails | Low |
⚠️ Attention: The design of plastic stops may vary depending on the specific modification. Do not use excessive force if the element cannot be easily moved.
Features of older models
In Pozis refrigerators produced before 2010, shelves without metal edging could be used. They are more fragile and require special care when tilting to remove them through a doorway.
Also worth mentioning are the shelves in the door. They are often attached with latches or holders that need to be carefully folded back. Metal grilles sometimes have special hooksthat need to be lifted up before sliding out.
Step-by-step instructions: how to remove a glass shelf
The process of removing a glass shelf requires coordination and adherence to a certain sequence of actions. First, grab the front edge of the shelf with both hands. Gently lift the front up a few millimeters to lift the glass away from the support pads.
Once the front edge is released, do not immediately pull the shelf towards you. You need to check that the rear end is not catching on any interior trim or sensors. Smoothly push the shelf forward, controlling its horizontal position.
- 👐 Take the shelf by the front corners on both sides.
- ⬆️ Lift the front edge 2-3 cm up.
- ⏩ Pull the shelf towards you until it stops against the stops doors.
- ↗️ Tilt the front part up and remove through the opening.
The critical moment comes when the shelf is level with the doorway. The width of the opening is often less than the depth of the shelf, so it must be tilted. The glass is tempered, but its edges are sensitive to impacts with the metal bodyso proceed slowly.
If your model has a shelf divided into two parts or has a folding design, first unfold it completely. Folding mechanisms may have locking latches that must be unlocked before lifting.
Removing plastic boxes and containers
Plastic vegetable and fruit boxes, located at the bottom of the refrigerator compartment, are usually the easiest to remove. However, there are some nuances here too. In some Pozis models, drawers have wheels or slides that can get stuck if pieces of food or ice get in there.
To remove the drawer, grab its top edge or special handle. Pull it all the way towards you. If the drawer is equipped with a full extensionsystem, it can come out together with the guides. In this case, you need to find the latch, usually located on the side of the guide, and press it.
Often owners forget about the lid of the box for the fresh zone. It needs to be removed separately; usually it just lies on top or is attached with light latches. Remove the cover to make it easier to access the box itself.
- 📦 Pull out the drawer until it clicks or stops.
- 🔍 Inspect the guides for debris.
- 🆙 Lift the front of the drawer to remove it from grooves.
- 🧹 Wipe the free space inside the chamber.
If the box is jammed, the reason may be that the plastic is deformed from the cold or overloaded with products. In this case, empty the drawer from the contents inside the refrigerator, if possible, and try to rock it from side to side.
Removing the shelves from the refrigerator door
Door shelves (balconies) in Pozis refrigerators are often subject to the greatest load and contamination. Their design involves fastening to the inner door panel using plastic latches or grooves. They need to be removed especially carefully, since the plastic on the doors is more fragile due to temperature changes when opening.
Usually the shelf is held on by two or four latches. Look for them, they may be located on the sides or bottom of the shelf. On some models, you need to press the latch and at the same time pull the shelf up or towards you.
Do not try to remove the shelf if there are heavy bottles in it. This creates an uneven load on the fasteners and can lead to breakage of the plastic. Always completely empty the door shelf before dismantling.
⚠️ Attention: The plastic on the refrigerator door becomes more brittle over time. When removing shelves from older models, be prepared for the fact that the latch may crack if pressed hard.
If the shelf is removable but cannot be removed, check whether it is part of the integral door structure. In some budget models, the shelves are not intended to be removed by the user and serve as a decorative element or a load-bearing part of the door.
Cleaning, drying and reinstallation
After successful removal of all elements, the cleaning stage begins. Glass shelves can be washed under running water using a mild detergent. Avoid using abrasive sponges, which can leave scratches that reduce the strength of the glass.
Plastic elements require more delicate handling. Hot water should not be used as the plastic may become deformed. After washing, be sure to dry all parts thoroughly. Moisture that gets back into the refrigerator can lead to the formation of ice or mold.
Installation is performed in reverse order. Make sure the shelves fit snugly and levelly into place. Check if they are loose. If the shelf is crooked, the food may roll down, and the shelf itself may burst under the weight.
- 🚿 Wash the glass with water at room temperature.
- 🌬️ Carefully wipe all parts dry.
- ✅ Check the stability of the installed shelves.
- ❄️ Turn on the refrigerator only after complete assembly.
Pay special attention to the cleanliness of the guides inside the chamber. Wipe them with a dry cloth to remove any crumbs or sticky residue. Clean guides ensure quiet operation and ease of installation of shelves.
Can refrigerator shelves be washed in the dishwasher?
Glass shelves with metal edging can usually be washed in the dishwasher on a gentle cycle. However, it is better to wash plastic elements and shelves with stickers or drawings by hand, since aggressive chemicals and high temperatures can damage their structure or appearance.
What to do if the glass shelf is cracked?
Using a cracked shelf is strictly prohibited. Under load, it can collapse completely, crumbling into small fragments among the products. Replace the damaged element with a new one by ordering an original spare part from the manufacturer or selecting an analogue in size.
How often do you need to completely defrost and wash it?
It is recommended to carry out a general cleaning of the refrigerator by removing all shelves at least once every 3-4 months. This will help avoid the appearance of unpleasant odors and the growth of bacteria. If you spill something sticky or strongly smelling, you need to clean it up immediately.
What is the best way to wipe glass shelves?
For glass, products without aggressive acids and alkalis are ideal. You can use regular soap solution, soda solution, or specialized glass cleaners. The main thing is to thoroughly rinse off the chemical with clean water so that its residue does not get on the food.