How to correctly set the temperature in the Gorenye refrigerator: step-by-step guide

Refrigerators Gorenje are known for their quality and reliability, but even the most advanced equipment requires correct settings. Optimal temperature is the key to long-term operation of the device and preservation of food. If you have just bought a refrigerator of this brand or have noticed that it has become worse at cooling, our article will help you understand the intricacies of adjustment.

Incorrect settings can lead to food freezing, ice formation on the walls, or, conversely, insufficient cooling. In this article we will look in detail at how to adjust the temperature in a refrigerator Gorenje taking into account the model, type of cooling system and external conditions. You will also learn which modes are suitable for different types of products and how to save energy without compromising the quality of storage.

We will pay special attention to the two most popular series: Gorenje RK (with a system NoFrost) and Gorenje NRK (with a drip defrosting system). Their settings have key differences that are important to consider. If your model is different, don’t worry: the general principles of temperature control are universal for most refrigerators of the brand.

Why is it important to set the temperature correctly

Not only food freshness, but also the service life of the equipment depends on the temperature in the refrigerator. Too low values lead to:

• 🥶 Freezing fruits, vegetables and dairy products (they lose their taste and beneficial properties).
• ❄️ Education ice in models without NoFrost, which worsens heat transfer and increases energy consumption.
• 💰 Increased wear of the compressor, as it works without interruption, trying to maintain the set mode.

Too high a temperature is no less dangerous:

• 🦠 Bacteria multiply faster, especially in meat and fish products.
• 🧀 Cheese, sausage and ready-made meals spoil in 1-2 days instead of the required 5-7.
• 🍎 Fruits and vegetables wither or rot due to lack of cold.

The optimal range for the main chamber is +2°C...+5°C, for the freezer - −18°C...−20°C. These values ​​are recommended by the manufacturer himself Gorenje in the instructions for most models. However, depending on the load on the refrigerator, the room temperature and the type of food, adjustments may be required.

Where is the temperature regulator in Gorenje refrigerators

The location of the controls depends on the model and year of manufacture. In most modern refrigerators Gorenje (series RK, NRK, NRC), the regulators are located:

• 🔄 Inside the main chamber — on the right wall (next to the shelves) or on the top panel under the ceiling.
• ❄️ In the freezer compartment — on the front panel (in models with separate door) or inside, next to the drawers.
• 📱 On the electronic panel - in refrigerators with a display (for example, Gorenje RK 6292 AW or NRK 6191 NHX).

In older models (before 2015 year) regulators are often made in the form of mechanical wheels with numbers from 1 to 5 (or 7). In new ones, these are touch buttons or sliders with an exact indication of the temperature. If you cannot find the regulator, check:

1. Instructions for the model (section "Control" or "Temperature adjustment").
2. Inscriptions Temp, Fridge (for the main chamber) and Freezer (for the freezer).
3. Hidden panel under the decorative cover (relevant for some models Gorenje ORK).

In refrigerators with the system Total NoFrost (for example, Gorenje RK 60359 OR) temperature setting can be combined with ventilation control. In this case, the display shows two parameters: for the refrigerator and freezer compartments separately.

Optimal temperature conditions for Gorenje refrigerators

The manufacturer recommends the following values for different zones:

These values ​​apply to standard conditions: room temperature +20°C...+25°C, normal load (no more than 70% of volume), closed door. If the room is hot (above +30°C), the refrigerator Gorenje may not cope with cooling. In this case:

• 🌡️ Set the regulator to one notch. colder (for example, instead of +4°C, choose +2°C).
• 🚪 Reduce the frequency of opening the door.
• 🔌 Check if the back wall is overheating (should be warm, but not hot).

For freezer mode −24°C (or “Super Freeze”) is needed only for quick freezing of large batches of food (for example, berries or meat). In normal mode, −24°C is enough −18°C.

What to do if the Gorenye refrigerator does not keep the set value. temperature?

If after setting the temperature in the chamber does not correspond to the set one, check:

1. Door seal — it could be deformed or dirty (wipe with a soap solution).

2. Rear wall — if it is covered with ice (in models without NoFrost), defrosting is required.

3. Vacation mode —if it is activated, the refrigerator operates in economy mode (+15°C).

4. Temperature sensor —in rare cases it fails (diagnostics required master).

How to adjust the temperature in Gorenie refrigerators with mechanical control

Mechanical regulators are found in budget and mid-range models, for example, Gorenje NRK 6191 WH or ORK 5291 AW. is a wheel with numbers (usually from 1 to 5 or 7), where:

• 1 —the warmest setting (minimum cooling).
• 5 (or 7) —the coldest (maximum cooling).

To set optimal mode:

1. Find the regulator inside the refrigerator compartment (usually on the right or top).
2. Turn the wheel clockwise to increase the cold, counterclockwise to decrease it.
3. For the freezer (if the regulator is separate) set the value 4–5 (corresponding to −18°C...−20°C).
4. Wait 6–8 hours until the temperature stabilizes, then check with a thermometer.

In models with with one regulator both chambers (for example, Gorenje RK 4181 E), the setting is averaged. To prevent the freezer from freezing and the refrigerator from being too warm, select the value 3.

Make sure that the refrigerator is not overloaded|Turn the wheel to value 3–4|Wait 6–8 hours for stabilization|Measure the temperature with a thermometer|Adjust when necessary -->

If, after setting, ice forms on the walls and the food freezes, reduce the value by 1 division. If, on the contrary, the chamber is too warm, increase it.

⚠️ Attention: In refrigerators Gorenje with mechanical control there is no accurate temperature display. The numbers on the regulator are cooling intensity levels, not degrees. For precise adjustment, use a separate thermometer.

Temperature adjustment in electronically controlled Burning refrigerators

Electronic panels are installed in premium segment models, for example, Gorenje RK 6292 AW, NRK 6191 NHX or NRC 6191 MX. They allow you to set the temperature with an accuracy of 1°C and are often equipped with a display.

Setting algorithm:

1. Press the button Fridge (or refrigerator icon) to select the main chamber.
2. Buttons +/− set the value +4°C.
3. Click Freezer (or the snowflake icon) for the freezer.
4. Set −18°C.
5. Confirm the settings with the button OK (or automatically after 5 seconds).

Some models (for example, Gorenje ORK 2091) have additional modes:

• 🍖 Super Cool —fast cooling to +2°C (for meat, fish).
• ❄️ Super Freeze —intensive freezing to −24°C (for large batches of products).
• 🌴 Holiday — “Vacation” mode (+15°C in the main chamber, energy saving).

To activate the special mode, press the corresponding button on the panel. It will work for 6–24 hours (depending on the model), after which the refrigerator will return to standard settings.

If the display shows an error (for example, E1 or E2), this may indicate a problem with the sensor. In this case:

1. Disconnect the refrigerator from the network for 10 minutes.
2. Turn it on again and check if the error persists.
3. If yes, contact the service center (the sensor may need to be replaced).

Setting features for refrigerators Burning with NoFrost and drip system

Refrigerators Gorenje are equipped with two types of defrosting systems:

1. NoFrost (full or partial) - automatic removal of ice due to air circulation (models RK 60359 OR, NRK 6191 NHX).
2. Drip system - ice melts during shutdown compressor, water flows into the pan (models ORK 5291 AW, NRK 6181 WH).

For NoFrost:

• 🌀 The temperature is distributed evenly thanks to the fans.
• 📉 Recommended temperature in the main chamber: +3°C...+4°C (due to active air circulation, products do not freeze even at +2°C).
• ⚠️ Do not load the chamber more than 80% - this disrupts air exchange.

For drip system:

• 💧 Condensation may form on the back wall - this is normal.
• ❄️ At temperatures below +2°C, ice appears on the walls (defrosting is required 1-2 times a year).
• 🍎 Products on the lower shelves may be colder than on the upper ones (due to natural convection).

In refrigerators with partial NoFrost (only in the freezer) the refrigerator compartment is defrosted by drip method. In this case:

• For the freezer, set −18°C.
• For the refrigerator - +4°C…+5°C (to avoid ice).

⚠️ Attention: In models Gorenje with NoFrost the ventilation cannot be turned off (if there is such an option). This will lead to uneven cooling and ice formation.

How to check if it is configured correctly. temperature

Even if you set the recommended values, the actual temperature may differ. To ensure that the settings are correct:

1. Place household thermometer (with a range from −20°C to +20°C) in the center of the refrigerator compartment on the middle shelf.
2. Close the door and do not open for 6-8 hours (preferably at night).
3. Check the readings. They should be within +2°C...+5°C.
4. Repeat the procedure for the freezer (place the thermometer between products).

If the temperature is outside the normal range:

• 🔢 In mechanical models, adjust the regulator by 1 division.
• 📱 In electronic models, change the value by 1°C in the desired direction.
• 🔍 Check that they do not interfere air circulation products (especially in NoFrost).

For accuracy of measurements:

• 🚫 Do not place the thermometer on a shelf next to the wall (it’s colder there).
• 🥛 Do not take measurements immediately after loading a large number of products.
• 🌡️ Use infrared thermometer to check the temperature at different levels.

In Gorenie refrigerators with a system DynamicCool (for example Gorenje RK 60359 OR), the temperature may fluctuate by ±2°C during the day. This is normal and. is associated with the operation of the adaptive cooling algorithm.

Frequent errors when setting the temperature and how to avoid them

Many users encounter problems due to incorrect actions. Let's consider common errors and ways to eliminate them:

Another common problem is discrepancy between the temperature on the display and the real oneThis can happen. due to:

• 🔧 Faulty sensor (replacement required).
• 🧊 Fan icing (in models with NoFrost).
• 🔌 Power surges (refrigerator may reset the settings).

If you notice that the refrigerator Gorenje has become worse in cooling, but the settings have not changed, check:

• 🔌 Power —the socket may be faulty or the voltage in the network is below 200 V.
• 🧲 Seal —if it is dirty or deformed, the cold comes out.
• 🌀 Ventilation holes —they should not be blocked by food.

⚠️ Attention: If the refrigerator Gorenje after setting, it constantly works without stopping, but the temperature in the chamber does not drop below +8°C, this may indicate freon leak or a compressor malfunction. In this case, independent repair is impossible - contact the service.

FAQ: Frequently asked questions about setting the temperature in Gorenye refrigerators

How to reset the temperature settings to factory settings?

In most models Gorenje with electronic control to reset the settings:

1. Disconnect the refrigerator from the power supply for 1 minute.
2. Turn it on again - it will automatically set the standard values (+5°C for the refrigerator compartment and −18°C for the freezer).

In mechanical models, you cannot reset the settings - just set the regulator to the value 3.

Why is it -24°C in the freezer, although I set it to -18°C?

This can happen for several reasons:

• Activated mode Super Freeze (turns off automatically after 24 hours).
• The temperature sensor is faulty (diagnostics required).
• The refrigerator is in the first setting mode (after turning on, it can operate at maximum power for 1-2 days).

Check whether the indicator Super Freeze on the panel is not on. If yes, wait for automatic shutdown or press the button again.

Is it possible to turn off the refrigerator compartment, leaving only the freezer?

Yes, in some models Gorenje (for example, NRK 6191 NHX) there is a mode Freezer Only. To activate it:

1. Press and hold the button Holiday (or Vacation) for 3 seconds.
2. The refrigerator compartment will turn off, and the freezer will continue to operate in standard mode.

B mechanical models do not have this option - you will have to turn off the entire refrigerator.

How to adjust the temperature if the refrigerator has two compressors?

In two-compressor models (for example, Gorenje RK 60359 OR), each chamber is controlled separately:

1. For the refrigerator compartment, use a regulator with inscription Fridge.
2. For the freezer - regulator Freezer.
3. Set +4°C for the refrigerator and −18°C for the freezer.

The advantage of such a system is the ability to completely turn off one of the chambers (for example, the freezer in the summer).

Why after defrosting refrigerator Gorenye does not cool?

This is a typical problem after improper defrosting. Reasons and solutions:

• 🕒 Enough time has not passed —the compressor may turn on 1–2 hours after connecting to the network.
• 🔌 The door is not closed tightly —check the seal and the position of the shelves.
• ❄️ Ice remains on the evaporator (in models without NoFrost) - defrost again.
• 🔧 Overheat protection has tripped - turn off the refrigerator for 10 minutes and turn it on again.

If after 6 hours the temperature has not dropped to normal, call a technician - there may be a freon leak.