How to set the temperature in a Pozis refrigerator: step-by-step instructions

Refrigerators Pozis are popular due to their reliability and energy efficiency, but even the most modern equipment requires correct settings. Temperature conditions directly affect the safety of products, the service life of the compressor and the level of energy consumption. Incorrect settings can lead to icing, food spoilage or system overload.

In this article we will look in detail at how to set the optimal temperature in the refrigerator Pozis for different models (including Pozis RK-101W, Pozis RK-149W and series NoFrost), take into account the features of storage areas and give practical recommendations for seasonal adjustment. We will pay special attention to common mistakes that users make when setting up for the first time.

Why it is important to set the temperature correctly

The temperature in the refrigerator is a balance between the safety of food and the load on the equipment. Too low values lead to:

• 🥶 Refreezing of fruits, vegetables and dairy products (taste and beneficial properties are lost).
• ❄️ Formation of excess frost in models without NoFrost, which requires frequent defrosting.
• ⚡ Increased energy consumption (the compressor runs longer than necessary).

Too high temperatures are no less dangerous:

• 🦠 Development of bacteria in meat and fish products (risk of food poisoning).
• 🧀 Rapid spoilage of perishable products (cheeses, sausages, ready-made dishes).
• 💧 Condensation on the walls and shelves, which leads to corrosion of metal elements.

The optimal range for the main compartment is +2°C...+5°C, for the freezer - −18°C...−24°C. However, these values may vary depending on the model, workload and external conditions (for example, heat in summer).

Where is the temperature regulator in Pozis refrigerators

Depending on the model Pozis controls can be located in different places. Here are the typical options:

In electronic models, the temperature is displayed on the display accurate to the nearest degree, in mechanical ones - a scale with conventional divisions is used (usually from 1 to 7). The higher the number, the colder.

Optimal temperature conditions for different zones

Refrigerators Pozis (like most modern models) have several climate zones. Let's look at which products are best stored where and what temperature to maintain:

• ❄️ Freezer compartment: −18°C - optimal mode for long-term storage (up to 12 months)For quick freezing (for example, berries), you can temporarily lower them. to −24°C for 12–24 hours.
• ❄️ Freshness zone (0°C): Suitable for meat, fish, cheeses (shelf life increases by 30–50%). data-i="100">this zone is usually designated as Pozis this area is usually designated as Fresh Zone or BioFresh.
• 🥛 Top shelves of the refrigerator compartment (+2°C...+4°C): Ideal for dairy products, eggs, sauces.
• 🍎 Middle shelves (+4°C...+5°C): Fruits, vegetables (except tropical), ready-made dishes.
• 🥕 Bottom drawers (+5°C...+6°C): Vegetables and herbs (high humidity prevents wilting).
• 🥖 Door (+6°C...+8°C): Drinks, oil, long-term stored products (ketchup, mustard).

In models with NoFrost the temperature is distributed more evenly, but it is still recommended to place products in zones. For example, in Pozis NF-120 the difference between the top and bottom shelves does not exceed 1-2°C, while in drip models (for example, RK-101W) it can reach 4°C.

What to do if in the refrigerator no freshness zone?

If your model Pozis is not equipped with a separate zone 0°C, use the coldest compartment (usually above the freezer) Pack the food in airtight containers and set the overall temperature of the refrigerator to +2°C. This will extend the freshness of meat and fish by 1-2. day.

Step-by-step instructions for setting the temperature

The adjustment process depends on the type of control. Let's consider both options:

For mechanical models (for example, Pozis RK-101W)

1. Open the refrigerator compartment and find the regulator (usually it is a rotary dial with marks from 1 to 7).
2. Set the handle to position 3–4 for the main compartment. This corresponds to +4°C...+5°C.
3. For the freezer, use a separate regulator (if available) - set to 5–6 (−18°C...−20°C).
4. Close the door and wait 6-8 hours until the temperature stabilizes.

For electronic models (for example, Pozis RK-149W)

1. Press the button Menu or Temp on the display.
2. Select section Refrigerator compartment (Fridge) and set the value +4°C using the buttons +/−.
3. Go to Freezer (Freezer) and set −18°C.
4. Activate the mode Super Cool (if available) for quick cooling after loading products.
5. Press OK or Save to save the settings.

The door closes tightly (the seal is not damaged)

The temperature on the display (or on the thermometer) corresponds to the set one

There is no excessive icing in the freezer

The compressor operates without constant humming-->

If after setting the temperature does not correspond to the set one, check:

• 🔌 Correct connection to the network (voltage should be 220–240 V).
• 🚪 The tightness of the door (place a sheet of paper - if it falls out, the seal is worn out).
• 📦 Loading of the chamber (too many products block circulation air).

Seasonal temperature adjustment

External conditions affect the operation of the refrigerator In summer and winter, the settings should be adjusted:

If the refrigerator is on unheated balcony or garage, in winter the temperature in the freezer can spontaneously drop to −25°C...−30°C. This is fraught with:

• 🧊 Freezing of food (the texture of meat and vegetables deteriorates).
• ⚡ Increased energy consumption (the compressor turns on more often).
• ❄️ Ice formation even in models NoFrost.

⚠️ Attention: If the temperature is the room drops below +10°C, the refrigerator Pozis may turn off or work unstably. In this case, it is necessary to transfer the equipment to a heated space.

Common mistakes and how to avoid them

Even experienced users sometimes make mistakes when setting up. Here are the most common:

1. Ignoring instructions. For example, in the model Pozis RK-149W mode Eco automatically increases the temperature by 1°C to save energy. If you do not take this into account, the products may spoil.
2. Overloading. Crowded shelves block air circulation, causing the temperature in some areas to rise to +8°C...+10°C.
3. Adjustment "by eye". Mechanical regulators do not show the exact temperature - use a separate thermometer to check.
4. Neglect of defrosting. In models without NoFrost ice thicker than 5 mm impairs heat transfer and causes the compressor to wear out.

Another typical problem is condensation on the back wall in drip models (for example, Pozis RK-101W). It is normal for moisture to drain into the drainage hole. But if condensation accumulates on shelves or products, check:

• 🌡️ Temperature (it may be higher than +5°C).
• 🚪 Frequency of door opening (frequent openings increase humidity).
• 📦 Tightness of food packaging (open containers evaporate moisture).

⚠️ Attention: If, after setting, the temperature in the refrigerator Pozis does not drop below +8°C, and the compressor runs without stopping, this may indicate a freon leak or a malfunction of the thermostat. In this case, diagnostics by a specialist is required.

How to check the temperature accuracy

The built-in sensors of refrigerators Pozis can give an error of up to ±2°C. To make sure the settings are correct:

1. Place household thermometer (preferably alcohol, with a range from −30°C to +30°C) on the middle shelf of the refrigerator compartment.
2. Close the door and do not open 12 hours (for example, at night).
3. Compare the thermometer readings with the set temperature. If the difference exceeds 2°C, adjust the settings.

For the freezer, use a thermometer with a metal probe:

• Place the probe between the products (not on the door!).
• Wait 24 hours - the freezer will take longer to stabilize.
• If the temperature is above −15°C, increase the cooling power by 1-2 notches.

In models with NoFrost (for example, Pozis NF-120), the temperature can be checked through the service settings menu. To do this:

1. Press and hold the button Super 5 seconds.
2. In the menu that appears, select Temp Check.
3. Wait for the current values to be displayed for both cameras.

FAQ: Frequently asked questions about setting the temperature in Pozis

How to reset the temperature settings to factory settings?

In electronic models (Pozis RK-149W, NF-120), hold down the button Menu for 10 seconds until the inscription Resetappears. In mechanical models, a reset is not possible - manual adjustment is required.

Why is the Pozis refrigerator very cold, although the regulator is at a minimum?

Probable reasons:

• Thermostat malfunction (replacement required).
• Clogging capillary tube (needs repair).
• Incorrect position of the sensor (in models with NoFrost).

Try to turn off the refrigerator for 24 hours (defrost), then turn it on again. If the problem persists, contact service.

Is it possible to turn off the freezer in Pozis if it does not do you need it?

In most models Pozis the freezer cannot be turned off, but you can:

• Set the temperature to minimum (−12°C...−14°C).
• Leave the chamber empty and open the door less often.
• In models with Holiday Mode (for example, Pozis NF-120), activate this mode - it maintains +10°C...+12°C throughout the entire refrigerator.

How often do you need to defrost a Pozis refrigerator without NoFrost?

Recommended frequency - once every 3-6 months, but focus on the thickness of the ice:

• Up to 3 mm - no defrosting required.
• 5-10 mm - defrost within 12 hours.
• More than 10 mm - urgent defrosting (24 hours) + checking the seal.

Use a plastic scraper (not metal!) to remove ice.

Why is there a different temperature on the shelves in the Pozis refrigerator?

This is normal for drip models (for example, Pozis RK-101W):

• The top shelves are the warmest (+5°C...+7°C).
• The middle shelves are optimal (+3°C...+5°C).
• The bottom drawers are the wettest (+5°C...+8°C).

To equalize the temperature, do not load the refrigerator more than 70% and provide a gap of 2-3 cm between products.