The question of what the egg stand in the refrigerator is called often confuses even experienced users. In technical documentation and in everyday life, this element can be called differently: tray, cassette, cell or holder. Exact name You need to know first of all to find a replacement if the original part has become unusable.
Standard technical name - egg container or egg tray. However, manufacturers often use unique terms in their parts catalogs. Understanding the classification of these elements will help you quickly find the right part in online stores or spare parts catalogs, without getting confused in synonyms.
It is important to note that the design of this element directly affects the safety of products. Correct storage in a specialized container prolongs the shelf life of eggs and prevents them from breaking due to vibration of the compressor. In this material we will analyze in detail all aspects of selection, installation and repair.
Technical names and classification of structures
In the professional environment and spare parts catalogs, the term is most often used cassette or tray. These are the most common designations you will see when ordering replacement parts. Structurally, they are divided into built-in and wall-mounted models, each of which has its own characteristics of fastening to the door shelf.
Wall-mounted options are often called Holders. They are fixed on the edge of a glass shelf or plastic stop. Built-in models are simply inserted into a specially designated niche on the door. Type of fastening This is a critical parameter when selecting an analogue, since the seats for different brands can differ significantly.
Some manufacturers use term cell, meaning a separate segment for one egg, but more often this word is applied to the whole block. The material used also varies: from transparent polystyrene to impact-resistant plastic with a rubberized bottom. The choice of material affects durability and resistance to mechanical damage.
⚠️ Attention: Do not try to use universal trays if their dimensions do not match the niche in the door of your refrigerator. A loose fit can lead to the container falling out when the door is suddenly slammed.
When searching for spare parts in catalogs, pay attention to the article numbers indicated in the instructions. Often universal names like "stand" may not give results in specialized stores where technical nomenclature is used.
Manufacture materials and their effect on storage
The main material for the production of trays is food-grade plastic. The most commonly used materials are polystyrene or ABS plastic. These materials have sufficient strength and resistance to low temperatures, which is critical for operation inside the refrigeration chamber.
Some premium refrigerator models are equipped with trays with antimicrobial coating. Such surfaces are easier to clean and prevent the growth of bacteria, which is especially important for products with porous shells. However, standard plastic models are also safe provided they are regularly sanitized.
- 🥚 Transparent plastic - allows you to visually monitor the presence of eggs and their integrity.
- 🛡️ Impact-resistant polymer - withstands falls and vibration during operation compressor.
- 🧼 Smooth surface - simplifies cleaning and removal of contaminants without the use of aggressive chemicals.
It is important to consider that cheap plastic can become brittle over time. Temperature changes with washing with hot water speeds up this process. Therefore, it is not recommended to wash the removed tray with boiling water; it is better to use warm water with a mild detergent.
Compatibility and universality of trays
Many users mistakenly believe that all egg trays are universal. In practice geometry of the seat different manufacturers (LG, Samsung, Bosch, Indesit) often do not match. Even if the dimensions of the container itself are the same, the shape of the latches or protrusions for fixation may differ.
There are so-called universal models that are mounted on suction cups or have an adjustable width. However, they rarely provide the same reliability of fixation as original spare parts. When the door moves, the universal tray may move, creating a risk of food damage.
| Refrigerator brand | Mounting type | Standard size | Features |
|---|---|---|---|
| LG, Samsung | Built-in | 10 eggs | Often have a slider lid |
| Bosch, Siemens | Hang-mounted/Built-in | 6-12 eggs | Reinforced sides |
| Indesit, Ariston | Built-in | 10 eggs | Simple shape without lid |
| Atlant | Built-in | 10 eggs | Budget plastic |
When selecting an analogue, be sure to measure the length and width of the niche in millimeters. Error Even 2-3 mm can make installation impossible. It is best to look for a spare part using the exact model number of your refrigerator.
Is it possible to use a tray from another model?
Theoretically, yes, if the dimensions are the same. However, make sure that the height of the tray does not interfere with the door closing tightly, otherwise the seal of the chamber will be broken.
Instructions for replacing and installing the holder
Replacing a broken or lost tray is a simple procedure, but requires care. Before starting work, it is recommended vacate the shelf to remove the products in order to provide access to the niche and avoid accidental breaking of remaining eggs.
If you are installing a hanging holder, make sure that the door shelf can withstand the additional load. Built-in models are simply inserted into the groove until there is a characteristic click or stop. The main thing is not to use excessive force so as not to break plastic guides.
☑️ Procedure for installing the tray
In some refrigerator models, the tray may be part of a more complex storage system, for example, a balcony on doors. In such cases replacement may require dismantling the entire section. If you see complex screw connections or hidden latches, it is better to refer to the instructions.
⚠️ Attention: Before installing a new plastic element, let it sit at room temperature for about an hour. Cold plastic is more fragile and can crack during installation.
Care, cleaning and contamination prevention
The egg tray is one of the places where bacteria multiply most actively. The remains of the shell or the leaked contents of a broken egg create an ideal environment for pathogenic microflora. Regular cleaning of this element is mandatory for product safety.
It is recommended to wash the container at least once a month. To do this, use warm water and a mild detergent. Pay special attention to corners and joints where plaque often accumulates. Disinfection possible using weak solutions, but they must be thoroughly washed off.
- 🚿 Washing - use running water to remove visible contaminants.
- 🧽 Mechanical cleaning —a soft sponge will remove dried-on residues without scratches.
- 🌬️ Drying —be sure to wipe the tray dry before putting it back in the refrigerator.
If an egg is broken in the tray, it can be difficult to remove the smell. In this case, soda solution or vinegar will help. Soak the container for 15-20 minutes, then rinse thoroughly. This will eliminate not only the smell, but also protein residues that can become sticky.
Repairing a cracked tray with your own hands
If the tray is cracked but has not fallen apart, you can try to restore it. However, it is strictly forbidden to use ordinary glue for gluing parts in contact with food. Toxic substances can migrate into products.
For temporary repairs, you can use cling film or special smaller food containers placed inside. A complete repair by soldering plastic is possible, but it requires skills and special equipment (a soldering iron with a thin tip).
The most reliable option is to search for used spare parts at refrigerator disassemblies. Often people sell entire doors or internal components from broken refrigerators. Original parteven a used one will last longer than a handicraft repaired one.
⚠️ Attention: Do not use superglue (cyanoacrylate) for repairs tray inside the refrigerator. At low temperatures, it becomes fragile, and its vapors can be harmful when storing open food.
In conclusion, it is worth noting that proper selection and care of this small element ensures order and safety. The standard tray is designed for 10 eggs, which corresponds to one standard package, so when purchasing spare parts, look for just such a capacity for convenience.
Can a plastic tray be washed in the dishwasher?
Most modern plastic trays are made of heat-resistant material, but high temperatures in the dishwasher (especially the drying setting) can deform thin plastic. It is recommended to wash by hand with warm water.
What to do if the tray falls out of the niche?
Check whether the fixing tabs on the tray itself or in the door niche are broken. If the plastic is intact, the tray may have been selected incorrectly. Temporarily, you can put a thin layer of foam rubber or use double-sided tape for industrial purposes, but it is better to replace it with a suitable size.
Are there trays for quail eggs?
Yes, there are special smaller cassettes for quail eggs, but they rarely come with refrigerators. They can be purchased separately in hardware stores or ordered online, selected according to the dimensions of a standard niche.
How to remove the smell of eggs from a plastic container?
Soak the tray in a solution of water and citric acid or vinegar for several hours. An activated carbon tablet placed in a dry tray overnight is also effective. After treatment, rinse thoroughly and ventilate.