How to accurately determine the year of manufacture of the Beko refrigerator: decoding the serial number and alternative methods

Refrigerators Beko are one of the most popular on the Russian market due to the price-quality ratio. However, over time, even reliable equipment requires maintenance, and for selecting spare parts, warranty repairs or assessing wear, it is critical to know the exact year of manufacture device. The manufacturer does not always indicate this information in clear form, encrypting it in the serial number or markings on factory stickers.

In this article you will find 5 working methods determining the production date of the refrigerator Beko - from deciphering the code on the nameplate to analyzing the design features of models of different years. We will figure out where exactly to look for the serial number, how to read its structure (including format changes after 2018), and provide an up-to-date table of symbols corresponding to years for models 2010–2026..

We will pay special attention to typical errors: why methods with reading the first/last digit of the number does not always work, how to distinguish the production date from the date of sale, and what to do if the sticker with the code has been erased. The information will be useful to both equipment owners and repairmen for accurate selection of components.

1. Where to look for the serial number on a Beko refrigerator

The serial number (serial number) is the main source of information about the release date. On refrigerators Beko it can be located in several places, and their location depends on the model and year of production. Let's start with the most obvious locations:

• 📋 Factory sticker on the back wall —the most reliable option. This is usually a white or silver sticker measuring 5x7 cm, glued next to the compressor or on the top of the case. Look for the inscriptions S/N, Serial No or Model/Serial.
• 🔍 Internal sticker on the door - in models after 2015 it is often duplicated inside the refrigerator compartment (on the side wall or ceiling). You will have to prepare for photography - the code may be small.
• 📄 Warranty card or product passport - if the documents have been preserved, the serial number is indicated on the first page next to the model (Model No). Attention: the date in the warranty card is the date of sale, not production!
• 🔧 Under the plastic cover. compressor - a rare case, but in older models (before 2012), the sticker could be attached under the motor protective casing. It is not recommended to remove it yourself - there is a risk of damaging the contacts.

If the refrigerator is built-in, the serial number may be hidden behind the decorative panel. In this case, you will have to carefully dismantle the facade (usually it is attached with magnets or latches). there. Beko with the system No Frost Also check the sticker on the inside wall of the freezer - it is sometimes placed there.

⚠️ Attention: On some refrigerators Beko the serial number is laser-etched directly onto the metal plate of the case (usually on the side). In this case, you will need good lighting or a magnifying glass to read the code.

2 The structure of the Beko serial number: how to decipher it. year

The format of the serial number has changed several times, but since 2010, one of two date encoding systems has been used. The main rule is: Beko has changed several times, but since 2010 one of two date encoding systems is used. Main rule: year of issue is encrypted in 3-4. characters of 10-12 characters of the common code. Let's look at both options.

Format until 2018 (example: 1234567890)

In old models, the serial number consisted of 10 digits, where:

• 3rd and 4th digits is the year of production (for example, 15 = 2015).
• 5th and 6th digits — week of issue (from 01 to 52).

Example: number 9814356789 deciphered as 2014, 35th week (end August).

Format after 2018 (example: AB12345678CD)

Since 2018 Beko switched to an alphanumeric code of 12 characters, where:

• 2nd character —a letter indicating the year (see table below).
• 3rd and 4th characters —week (numbers from 01 to 52).

Example: number AK35678901EF with a letter K corresponds 2020 (35th week - end of August).

Please note: letters O i I in serial numbers Beko are not used (they can be easily confused with numbers 0 i 1).If your code contains O, most likely this is a typo - check again.

3. Alternative ways to determine the year of manufacture

If the serial number is erased or it cannot be deciphered (for example, due to a non-standard format), use alternative methods. They are less accurate, but will help narrow the range to 1–2 years.

By refrigerator model

The model number (Model No) often contains information about the generation of equipment. data-i="135">the first 1-2 digits after the letter prefix can indicate the year: Beko The first 1–2 digits after the letter prefix can indicate the year:

• 🔢 Models with a prefix CS, CN and numbers 35xxx — 2013–2015
• 🔢 Prefixes GNE, RCS with numbers 5xxx — 2016–2018
• 🔢 Series RCNA, GNLE with numbers 6xxx or 7xxx — 2019–2022

Example: model GNE 51320 with a high probability was released in 2017–2018, and RCNA 400K20 — in 2020–2021

By design features

The design and equipment of refrigerators Beko has changed over the years. details:

• 🔌 Compressor type:
  • Linear (without inverter) - until 2016.
  • Inverter (ProSmart Inverter) - from 2017.
  • Double inverter (Dual Cooling) - from 2020.
• ❄️ Defrosting system:
  • Frost Free (drip) - until 2015.
  • No Frost (full) - from 2016 year.
  • NeoFrost (double-circuit) - from 2019.
• 📱 Electronic control:
  • Mechanical handles - until 2014.
  • Touch buttons - 2015–2018
  • Display with touchscreen - since 2019.

For example, if your refrigerator is equipped with a system NeoFrost and an inverter compressor, it is definitely not older than 2019And the model with mechanical regulators and drip. defrosting, most likely released before 2015.

Find the serial number on the back wall|Take a photo of the code in poor lighting|Check the format (10 digits or 12 characters)|Check the letter/numbers with the decoding table|Evaluate the design features of the model-->

4. Frequent errors when determining the year

Even experienced craftsmen sometimes make mistakes when reading the serial number. Here are the most common traps:

• 🔢 Confusion with the first and last digits. In numbers before 2018, the year is encoded 3rd and 4th digits, and not as the first pair! For example, in the code 9814567890 year is 2014, not 1998.
• 📅 Confusion of production and sales dates. The warranty card can be filled out 1–2 years later than the actual release (warehouse storage time).
• 🔤 Incorrect decoding of letters. The letter I (ai) in the serial number Beko is not used - it is replaced by 1 (unit). And the letter O is zero.
• 📏 Ignoring code length. Numbers of 10 digits and 12 symbols are deciphered differently! First, determine the format.

Another common mistake is trying to determine the year by spare part article number. For example, if you find a compressor marked EM1234-2018, this does not mean that the refrigerator was manufactured in 2018. The date on the part may indicate the year of its production, and not the year of assembly of the equipment!

⚠️ Attention: On some models Beko for the markets of Turkey and Europe, a different serial number format is used. If your code does not fit the described schemes, check the country of origin on the sticker. For imported refrigerators, you may need to contact a service center.

5. How to check the authenticity of a serial number

Fake stickers with serial numbers are rare, but they are found on “gray” refrigerators or after unqualified repairs. To verify the authenticity of the code:

1. Check the format. Original numbers Beko always contain:
   • For old models: exactly 10 numbers without spaces and letters.
   • For new ones: 12 characters with 2-3 letters (for example, AB12345678CD).

Check the logic dates. The year in the number cannot be later than the current one, and the week cannot be greater than 52. For example, the code ABZ60... is obviously fake: the letters Z are not in the table, and the week 60 does not exist.

Evaluate the quality of the sticker. Original stickers Beko:

• Printed on thick paper with a holographic coating.
• Have a clear font without blurring.
• No glue turns yellow over time.

If in doubt, compare the photo of your serial number with examples from official sources. For example, on the website Beko in the support section there is a gallery of stickers for different years.

Signs of a fake serial number

Suspicious "round" dates (for example, the 52nd week of each year).

The sticker is glued crookedly or in an atypical place (for example, on the door).

The numbers on the sticker are erased with light friction (the original is abrasion resistant).

The letters in the number are not match the decryption table (for example, Q or Ñ).

6. What to do if the serial number is erased

If the sticker with the code is damaged or missing, try these steps:

1. Check the box and documents. The serial number is duplicated:
   • On the warranty card (section Serial No).
   • On the receipt or invoice (if purchased in a store).
   • On the box (usually on the end sticker).

Contact the service center. Having provided the model refrigerator and a photo of the nameplate (even partial), the technician will be able to restore the number using the database Beko. The service is free if the equipment is under warranty.

Use indirect signs:

• Check the production date of the compressor (there is one on its body) sticker with the year).
• Evaluate the design - models before 2015 have rounded handles, after - straight.
• Look at the color of the interior lighting: incandescent lamps (until 2016), LEDs (from 2017).

If the refrigerator was bought used, try to contact the previous owner - he can save photographs of the documents. In extreme cases, the technician will help determine the approximate year of manufacture based on the characteristic features of the model (see section 3).

7. Why know the year of manufacture of the Beko refrigerator? data-i="242">The exact production date is needed not only for curiosity. Here are practical situations where this information is critical: Compressors, control boards and seals for models before 2015 are often incompatible with new ones. For example, a start relay for refrigerators from 2012 will not fit a 2019 model. they are identical in appearance.

The exact production date is needed not only for curiosity. Here are practical situations where this information is critical:

• 🔧 Repair and spare parts. Compressors, control boards and seals for pre-2015 models are often incompatible with new ones. For example, start relay for refrigerators Beko The 2012 will not fit the 2019 model, even if they are identical in appearance.
• 💰 Warranty service. The warranty period is counted from the date of production, not sale. If the refrigerator has been in the warehouse for 2 years, the actual warranty period may already have expired.
• 📉 Wear assessment. refrigerators Beko - 10–12 years. If your model was released in 2013, you should think about preventative replacement of the thermostat or compressor.
• 💸 Sales of used equipment. Buyers often check the year of manufacture by serial number. 20–30% more expensive than a similar model of 2015.
• ⚡ Energy efficiency. Models before 2017 usually have a class A+, after - A+++ or A++++. affects energy consumption and operating costs.

In addition, knowing the year of manufacture will help avoid fraud when buying a used refrigerator. For example, if the seller claims that the equipment is “only 3 years old”, and the serial number shows 2015, this is a reason to bargain or refuse the deal.

FAQ: Frequently asked questions about the production date of refrigerators. Beko

Is it possible to determine the year of a refrigerator model without a serial number?

Yes, but with an error of ±1–2 years. For example, models with a prefix CS and numbers 35xxx were released in 2013–2015. and series RCNA —in 2019–2021. More precisely, only the serial number or contacting the service center will help.

What to do if the serial number begins with a letter not listed in the table?

Most likely, your refrigerator was released for the Turkish or European market, where a different encoding format is used. case:

1. Check the country of origin on the label (for example, Made in Turkey).
2. Contact the official service Beko with a photo of the sticker - they will decipher the code using the internal database.

It is impossible to decode such a number yourself - the algorithm is not is published.

How to find out the week of production if only the year is known?

Without a serial number it is impossible to determine the exact week. However, you can approximately estimate it by indirect signs:

• If the refrigerator was purchased in January-March, most likely it is 1–13 week.
• Models released during the peak season (May–August) usually have numbers from 20–35 weeks.
• Appliances from the "New Year's sales" are often produced in 45–52 weeks previous year.

For an accurate determination, you need to decipher the full serial number.

Can the serial number tell you the country of assembly?

No, the serial number Beko does not contain information about the country of manufacture. This data is indicated separately. on the nameplate in the form of an inscription Made in [country]Refrigerators Beko are assembled in:

• Turkey (factories in Istanbul and Izmir) - most models.
• Russia (Lipetsk) - series for the local market (labeling Made in Russia).
• Romania and Thailand - limited quantities for Europe and Asia.

What do the letters at the beginning of the serial number mean (for example, AB, CD)?

The first 1–2 letters in the numbers after 2018 indicate factory code and model series, but do not carry information about the date. For example:

• AB - plant in Turkey, series Standard.
• CD — plant in Russia, series Premium.
• EF — experimental or limited batches.

To determine the year, it is important second symbol (letter) or 3–4 digits in old numbers.