Turning off a refrigerator Bosch using a button is a procedure that at first glance seems simple but requires attention to detail. Incorrect actions can lead to malfunctions of equipment, loss of settings, or even breakdown of the compressor. This is especially true for modern models with electronic control, where a simple button on the panel often hides complex operating algorithms.
In this article we will analyze not only the standard shutdown procedure, but also the nuances for different series of refrigerators Bosch (for example, KGE39, KIN86, KAN92**), and we will also explain why sometimes the button does not work and what to do in such cases. We will pay special attention to preparing the equipment for long-term downtime - this will help to avoid unpleasant surprises when turning it back on.
If you plan to turn off the refrigerator for moving, repair or defrosting, follow our recommendations - they are based on the manufacturer’s official instructions and the experience of service centers. And if your model is not equipped with a power button (for example, some variants of the series KIV38X**), we will suggest alternative methods.
Why you can’t just unplug the plug from the socket
Many users mistakenly believe that turning off the refrigerator comes down to removing the plug from the socket. However, for models Bosch with an electronic control unit (EBM) this can lead to:
- 🔋 Failure of temperature settings — after switching on, the refrigerator may operate in the wrong mode, freezing or not cooling food sufficiently.
- ⚡ Peak loads on the compressor —severe turning off/on the power increases the risk of failure of the start relay.
- 📱 Loss of data in memory —in models with a display (for example, KAN92VI30R) user settings such as mode may be reset. data-i="64">or
SuperCoolorHoliday.
Moreover, in refrigerators with a NoFrost system (for example, KGN39XL40), a sudden shutdown can disrupt the evaporator defrost cycle, which will lead to the formation of ice on the back wall. The manufacturer strongly recommends using the standard shutdown button - this guarantees the correct completion of all processes.
Where is the off button in Bosch refrigerators
The location of the button depends on the model and type of control. In most cases, it is located:
- 📛 On the top panel —in models with mechanical control (for example, KGN33VW20R), the button can be combined with the thermostat or located next to it.
- 🖥️ On the electronic display —in refrigerators with touch or button controls (series KIN86, KAN92) the power button is often indicated by a symbol
OorOFF. - 🔍 Hidden under the cover —in some models (for example, KIV38X20) the button is hidden under a decorative panel to prevent accidental press.
If you cannot find the button, pay attention to the instructions for your model - it usually contains a diagram of the control panel. For convenience, we have collected the location of buttons in popular series:
| Refrigerator series | Control type | Button location | Designation |
|---|---|---|---|
| KGE39, KGN39 | Mechanical | Top panel, next to the thermostat | Red button or switch |
| KIN86, KAN92 | Electronic (display) | On the display panel, on the right | OFF or icon ⏻ |
| KIV38X, KIL32 | Electronic (without display) | Under the decorative cover or on the side panel | Button with the inscription On/Off |
| KGV36, KGN36 | Mixed | On the top panel, next to the indicators | Illuminated button |
In some models (for example, Bosch KAN92VI30R) the power button is combined with the panel lock button. To turn off the refrigerator, you may need to hold it for several seconds - this is indicated by a sound signal or flashing indicator.
Step-by-step instructions: how to turn off a Bosch refrigerator with a button
Before turning off the refrigerator, complete several preparatory steps. This will help avoid problems when turning it back on:
- Remove all perishable foods - if the refrigerator is turned off for more than 2-3 hours, food may spoil.
- Defrost the freezer (if this is not a model NoFrost) - this will prevent the formation of a puddle inside.
- Clean the internal surfaces —after turning it off, it will be easier to wash the refrigerator if it is empty.
- Disable additional functionssuch as
SuperCoolorSuperFreezeif they are active.
Now let's move on to the shutdown process itself. The instructions are suitable for most models Bosch with push-button control:
Remove food|Defreeze the chamber (if necessary)|Clean the shelves|Disable additional modes|Check the location of the power button-->
- Locate the power button (see the table above or the instructions for the model).
- Press and hold the button for 3-5 seconds. In some models, one short press is enough, but usually you need to hold until a sound signal or the indicator blinks.
- Wait for confirmation of shutdown:
- 🔴 On mechanical models - a relay clicks or the light goes out inside the camera.
- 📱 On electronic devices - the inscription appears
OFFon the display or the power indicator blinks.
If after When you press the button, the refrigerator does not turn off, check:
- 🔌 Connecting to the network — perhaps the plug is not seated tightly in the socket.
- 🔒 Mode blocking —in some models the shutdown button is locked (you need to hold the lock button for 5 seconds).
- ⚡ Network voltage —if it is too low, the electronic unit may not work.
What to do if the button does not work?
If the shutdown button does not respond to pressing, try the following steps:
1. Unplug the refrigerator for 1-2 minutes, then turn it on again - this will reset the electronic unit.
2. Check to see if Demo Mode is activated, which blocks shutdown. To exit it, you usually need to hold down the SuperCool and SuperFreeze button simultaneously for 10 seconds.
3. If all else fails, contact the service center - there may be a malfunction of the control board.
Disconnection features for refrigerators with the NoFrost system
Models Bosch with technology NoFrost (for example, KGN39XL40, KIN86AF30R) require a special approach when disconnected. The fact is that such refrigerators have an automatic defrosting system, and a sudden interruption of its cycle can lead to:
- ❄️ Ice formation on the evaporator —if you turn off the refrigerator while the defrosting heater is operating.
- 💦 Condensation accumulation —moisture will not have time to evaporate through the drainage system.
- 🔧 The defrost timer fails —after turning on, the refrigerator may not work correctly for the first few hours.
To avoid these problems, follow the algorithm:
- 1-2 hours before shutdown turn off the mode
SuperFreeze(if it was activated). - Wait until the refrigerator completes the cooling cycle - the compressor should turn off (stop humming).
- Press the shutdown button and hold it at least 5 seconds - this ensures correct shutdown of the system NoFrost.
- If the refrigerator will be turned off for more than a day, leave the doors ajar to avoid mold.
In models with a system LowFrost (for example, KGE39AW20) after turning off it is recommended to manually wipe the back wall of the freezer - this will remove any remaining condensation and prevent ice from forming when turned on again.
What to do after shutting down: preparing for storage or transportation
If the refrigerator is turned off for moving, repair or long-term storage, follow these steps:
Thaw and dry the chambers|Remove and pack shelves/drawers|Secure the doors with tape|Transport in a vertical position|Use the original packaging (if available)-->
Pay special attention to:
- 🚛 Transportation —refrigerators Bosch can only be transported in a vertical position. If you need to put it on its side, place it on right side (compressor side) and for no more than 30 minutes.
- 🧊 Defrosting - even in models NoFrost may condensation will accumulate. After turning off, leave the doors open for 4-6 hours to dry.
- 🔧 Fastening parts - secure the shelves and drawers so that they do not damage the internal walls during transportation.
If the refrigerator will be stored without using:
- 🧹 Clean all surfaces baking soda solution (1 tablespoon per 1 liter of water).
- 🚪 Leave the doors slightly open (you can put a towel) to avoid the musty smell.
- 🔌 Turn on the refrigerator periodically for 1-2 hours every 1-2 months to prevent the seals from drying out.
Common mistakes and how to avoid them
Even experienced users sometimes make mistakes when turning off refrigerators Bosch. Here are the most common of them and ways to prevent them:
| Error | Consequences | How to avoid |
|---|---|---|
| Shutdown during compressor operation | Peak load the next time you turn on, risk breakdown of the start relay | Wait until the compressor turns off (stops humming) |
Ignoring the mode Holiday |
Wasted energy consumption, compressor wear | Activate the mode Holiday or turn off the refrigerator completely |
| Closed doors during storage | The appearance of mold and unpleasant odors | Leave the doors ajar, use odor absorbers |
| Sudden switching on after long inactivity | Electronic unit failure, errors on the display | Wait 5-10 minutes after connecting to the network before turning it on |
Another typical mistake is trying to turn off the refrigerator through a smart application (for example, Bosch Home Connect), without pressing a physical button. This may cause the refrigerator to remain in "sleep" mode, but the compressor will not turn off completely. Always use the mechanical button to turn it off completely!
How to turn on a Bosch refrigerator after a shutdown
Restarting the refrigerator after a shutdown also requires compliance with several rules:
- Wait 5-10 minutes after connecting to the network - this is necessary to stabilize the pressure in the cooling system.
- Press the power button (same button as for turning off). In some models, turning on occurs automatically after power is applied.
- Make sure that the power indicator lights up or the display appears
ON. - Check the temperature settings —after disconnecting, they can be reset to factory settings (
+4°Cfor the refrigerator compartment,-18°Cfor the freezer). - Do not load food immediately —let the refrigerator reach the desired temperature (usually 1-2 hours).
If the refrigerator does not turn on:
- 🔌 Check the network connection and the serviceability of the socket.
- 🔋 Make sure that the button is not blocked (in some models the locking is activated after a long period of inactivity).
- ⚡ Try resetting the settings by unplugging the refrigerator for 1 minute.
In models with a display, after turning on, an error code may appear (for example, E01 or F02). This does not always indicate a breakdown - often the error disappears after a reset or restart. If the code remains, contact the service center.
FAQ: Frequently asked questions about turning off Bosch refrigerators
Is it possible to turn off a Bosch refrigerator by simply removing the plug from the socket?
Technically it is possible, but not recommended. A sudden power cut may cause the electronics to malfunction, especially on models with a display. Use the shutdown button - this guarantees the correct completion of all processes.
Why does the refrigerator continue to hum after turning off the button?
Most likely, you pressed the button during an active cooling or defrosting cycle. Wait until the compressor stops running (stops humming) and try again. In models with NoFrost you may need to hold the button for up to 10 seconds.
How to turn off a Bosch refrigerator if the button is broken?
If the button does not work, unplug the refrigerator by removing the plug from the socket. If the button requires repair, contact a service center - replacing it yourself may void the warranty. A temporary solution may be to turn off the circuit breaker in the electrical panel (if the refrigerator is connected by a separate line).
Is it necessary to defrost a Bosch refrigerator before turning it off?
Depends on the model:
- 🔹 NoFrost —defrosting is not required, but it is recommended to wipe the chambers from condensation.
- 🔹 LowFrost or drip system - defrosting is required if the refrigerator is turned off for more than a day.
What to do if, after turning on, the Bosch refrigerator does not cool?
Possible causes and solutions:
- 🔹 Settings failure —check the temperature conditions on the display.
- 🔹 Drain system clogged —clean the condensate drain hole.
- 🔹 Compressor malfunction —if the refrigerator hums but does not freeze, contact service.
If the problem persists, perform a reset: unplug the refrigerator for 5 minutes, then turn it on again.