How to properly turn off the freezer in a two-compressor Atlant refrigerator: instructions with photos and tips

If your refrigerator was manufactured before 2015, the control interface may differ. In this case, check the instructions for the specific model or check the markings on the sticker inside the chamber.

1. Checking the refrigerator model: is the instruction suitable?

Not all two-compressor refrigerators Atlant support complete shutdown of the freezer compartment. Key signs of compatibility:

• 🔹 Availability two separate temperature controllers (usually located on the top panel or inside the chambers).
• 🔹 The model marking contains the letters DM (Dual Motor) or NF (No Frost) - for example, Atlant MXM 2835-90 DM.
• 🔹 The instructions contain the item "Mode Vacation" or "Turning off the freezer."

Models with one compressor (even if they are two-chamber) do not allow turn off the freezer separately - if you try to do this, the refrigerator compartment will also stop working. To make sure, look at the back wall of the refrigerator: two compressors look like two separate black cylinders with tubes.

2. Preparing the refrigerator to turn off the freezer

Before turning off the freezer, it is necessary prepare the refrigerator correctlyto avoid problems with condensation, unpleasant odors or breakdowns equipment Follow this algorithm:

1. Defreeze the freezer. If there is ice in the chamber, it must be removed - otherwise, when defrosting, water will flow onto the floor or inside the case, which can cause corrosion or a short circuit.
2. Remove all food. Even if you plan to turn off the freezer for a short time, the food inside will begin to deteriorate within 2-3 hours without cold.
3. Wipe down interior surfaces. Use a soda solution (1 tablespoon per 1 liter of water) or a special product for refrigerators. This will prevent mold from appearing.
4. Leave the freezer door slightly open. This is necessary for ventilation and to prevent condensation.

If your model Atlant has a function Super freeze, be sure to turn it off 12 hours before turning off the freezer completely. Otherwise, the compressor may overheat the next time you turn it on.

Remove all food from the freezer compartment

Defreeze the chamber (if there is ice)

Wipe the shelves and walls with a soda solution

Disable the Super Freeze mode (if available)

Open the freezer door for ventilation

-->

3. data-i="110">The shutdown process depends on the type of control of your refrigerator. Let's consider two options:

The shutdown process depends on the control type of your refrigerator. Let's consider two options: mechanical (wheel controls) and electronic (display with buttons).

3.1. Mechanical control (models Atlant until 2018)

In refrigerators with mechanical controls, the freezer is turned off by turning the thermostat knob to position OFF or 0. Follow the instructions:

1. Find the freezer temperature regulator. It is usually located:
   • 🔸 On the top panel of the refrigerator (on the right or left).
   • 🔸 Inside the freezer (on wall or ceiling).

⚠️ Attention: If, after turning off the freezer, the refrigerator compartment also stops working, it means that your refrigerator do not. two-compressor, but with one compressor and two circuits, in this case you cannot turn off the freezer separately!

3.2. Electronic control (models Atlant after 2018)

In modern models with a display, the shutdown process is simpler, but requires strict adherence to the instructions. Example for refrigerators Atlant series. data-i="135">or XM or NF:

1. Press the button Freezer (usually indicated by a snowflake ❄️).
2. Hold it for 3-5 seconds until the display shows inscription OFF or 0°C.
3. Confirm the shutdown with the button OK (if available).

In some models (for example, Atlant MXM 2808-90 NF) you need to go to the menu:

Menu → Settings → Freezer mode → Disable

After this, the display will show a dash (--) instead of the temperature.

4. What to do after turning off the freezer?

Turning off the freezer is half the battle. problems in the future, take a few additional steps:

• 🧊 Leave the freezer door ajar (by 5-10 cm). This will prevent the formation of mold and unpleasant odor.
• 🌡️ Monitor the temperature in the refrigerator compartment. If it starts to rise above +5°C, check if the main one has accidentally turned off. compressor.
• 🔌 Do not pull the plug from the socket! The refrigerator compartment must remain turned on. Turning off the power completely can lead to failure of the electronic unit.

If you turn it off freezer for a long time (for example, during a vacation), open the door for 10-15 minutes every 1-2 weeks to ventilate. This will help avoid stagnation of air and the appearance of odors.

5. Common mistakes and how to avoid them

Many users make the same mistakes when turning off the freezer. Here are the most common of them and ways to prevent them:

⚠️ Attention: If after When the freezer is turned off, the refrigerator compartment begins to work intermittently (it often turns on/off, does not cool), which means that the compressors in your model connected by a common circuit. In this case, you cannot turn off the freezer separately - contact a specialist to modify the system.

6. How to turn on the freezer again?

Turning on the freezer after inactivity is no less important than turning it off. If this is done incorrectly, the compressor may fail due to water hammer (liquid freon entering the cylinder). Follow these instructions:

1. Wait 10-15 minutes after turning it off, if the freezer has been defrosted. This is necessary to equalize the pressure in the system.
2. Close the freezer door.
3. Turn on the freezer:
   • For mechanical control: turn the knob to 1-2 divisions (minimum temperature).
   • For electronic control: press the ❄️ button and set the temperature -18°C.

If after turning on the freezer does not cool, check:

- Whether the door is closed correctly (the seal may be dirty).

- Did not work whether thermal fuse (in this case replacement is needed).

- Are there any errors on the display (codes E1, E2 indicate a malfunction of the sensors).

7. Alternative ways to save energy

If your goal is to save on electricity, turning off the freezer is not always the best option. Consider alternatives:

• 💡 Set the optimal temperature: -18°C for the freezer and +4°C for the refrigerator. Each degree lower increases energy consumption by 5–7%.
• 🧲 Defrost the freezer regularly. Ice 5 mm thick increases energy consumption by 20–30%.
• 🔄 Use the mode Vacation. In some models Atlant it automatically maintains the minimum temperature in the refrigerator compartment and turns off the freezer.
• 🔌 Connect the refrigerator via socket with a timer. You can set the freezer to turn off at night (if it is not needed).

⚠️ Attention: If you use a timer, make sure that the refrigerator compartment remains on. Frequent switching on/off reduces the service life of the compressor.

8. Frequently asked questions about two-compressor refrigerators Atlant