Modern refrigerators Atlant are equipped with many useful functions that are designed to make the user’s life easier and extend the shelf life of food. One such option is the intensive cooling mode, often called super freezing. This function allows you to quickly freeze a large volume of fresh food without defrosting the supplies already in the freezer, which is especially important after going to the market or preparing for the winter.
However, many owners are faced with a situation where the mode indicator continues to light, and the cooling system operates in enhanced mode without any apparent need. In some cases, this leads to excessive energy consumption or excessive freezing of products that were not planned to be frozen “on stone”. Understanding how to disable super freezingis a basic skill in operating household appliances of this brand.
Depending on the series and year of manufacture of your unit, the control of this function may vary significantly. In older models it is a mechanical switch, in new ones it is a touch panel or electronic control with a timer. In this article we will analyze in detail all possible options for deactivating the mode, the reasons for its spontaneous activation and the nuances of the automation so that you can fully control the climate in your kitchen.
The principle of operation of the fast freezing mode
Function superfreezing (Super Freeze) in refrigerators Atlant designed for emergency temperature reduction in the freezer compartment. When you activate this mode, the compressor begins to work continuously, without stopping for pauses, which are usually provided for by the cooling cycle. This allows you to quickly pass through the critical zone of water crystallization in products, preserving their structure and useful properties.
It is important to understand that in this mode temperature in the freezer it can drop significantly below standard -18°C, reaching values -24°C and even lower. This is not a problem for already frozen products, but for fresh vegetables or fruits caught in such a zone, it can be disastrous. Therefore, refrigerator automation usually provides for a limitation on operating time.
⚠️ Attention: Long-term operation of the compressor in super-freezing mode without breaks leads to increased wear on the motor and an increase in electricity bills. Do not leave this mode on unnecessarily for more than 24-48 hours.
The control system can be implemented in different ways. In budget models, this is simply a forced start of the compressor; in more advanced models, it is a smart system that itself monitors temperature and time. If the indicator is constantly on, this may mean that the cycle has not yet been completed, or there has been a failure in the electronic control module.
Mechanical control: models with a button on the body
In most classic refrigerator models Atlant, especially two-chamber series, the fast freezing mode control is located on the front panel or the top of the case. Usually this is a button with a picture of a snowflake or the words "Super". Next to it is a indicator (light bulb), which lights up yellow or red when the function is activated.
To disable the mode in such models, you just need to press the same button again. The mechanics of the process are simple: the first press closes the circuit and the light comes on, the second press opens it. However, users often encounter the fact that the light does not go out immediately after pressing. This is normal behavior for some modifications, where the shutdown does not occur instantly, but after the temperature in the chamber reaches a certain threshold.
If the button is pressed, but the mode does not turn off for a long time, it is worth checking whether the button itself is stuck. Mechanical switches can become oxidized or dirty over time. Gently but firmly pressing a few times can help restore contact. It is also worth making sure that you do not confuse the refrigerator power button and the super freeze button, although their location is usually well differentiated.
- ❄️ Find the button with the snowflake symbol on the top panel or facade.
- 🔘 Press it again to interrupt the operation cycle.
- ⏳ Wait 10-15 minutes for the indicator to cool down and the system to stabilize.
- 🔌 If the button does not respond, try turning off the power to the refrigerator for 15 minutes.
In some cases, especially in older models, the button may be physically blocked in the “on” position. This requires the intervention of a technician, but most often the problem is solved by simply rebooting the device. Unplug power the refrigerator from the outlet, wait about 10-15 minutes and turn it on again. This will reset the control logic errors.
☑️ Checking the mechanical button
Electronic control and touch panels
More modern lines of refrigerators Atlant equipped with an electronic control unit, which can be located both on the outer door and inside the refrigerator compartment. Here, the process of turning off super freezing occurs through the menu or a dedicated touch zone. Such models often implement the function automatic shutdown after a specified period of time (usually from 12 to 48 hours).
If the snowflake icon or the inscription "Super" is on the display, but you want to stop the mode ahead of time, the algorithm of actions could be next. On models with a display, you must find the corresponding icon and touch it, or use the mode selection button (Mode or Func) until the desired symbol flashes, and then confirm the action with the installation button (Set or OK).
⚠️ Attention: On touch screens panels, it is important to touch the surface with dry hands. Moisture can distort the signal, and the shutdown command simply will not pass to the controller.
Sometimes users are faced with a situation where the super-freezing mode turns on by itself. This may be due to the firmware of the controller or because the temperature in the freezer has risen above a critical level (for example, after a long defrosting or loading warm products). heat compensation.
Let's look at typical combinations of buttons for popular series with electronics:
- 🖱️ XM series: hold the "Freeze" button for more than 3 seconds.
- 🖱️ HLM series: double-click the selection button mode.
- 🖱️ Models with a display: enter menu → freeze → off.
If the electronics are frozen and do not respond to touches, the only way out is a complete reset. Disconnect the refrigerator from the network for at least 20 minutes. This time is necessary for the capacitors on the control board and the controller memory to discharge. cleared of temporary errors. After turning on, check the default settings.
Why does the sensor not respond?
Atlant refrigerator touch panels often use resistive technology, which is sensitive to static electricity and humidity. If the room is very dry, a static charge may accumulate on the display, blocking input. Wiping the panel with a slightly damp (not wet!) a napkin can remove static and return the senses--WIDGET:spoiler
Hidden switches inside the freezer compartment
There is a separate category of refrigerators Atlantwhere the super-freezing control is performed not on the facade, but inside the freezer compartment. This is often found in models of the mid-price segment. The switch can. be a small button or toggle switch located on the inner wall, next to the shelves or on the ceiling of the chamber.
Accessing this switch often requires removing the top shelf or drawer. This is done to protect against accidental changes by children or when cleaning. In some models, this switch is combined with the temperature regulator, but has a separate position for activating the intensive mode.
If you find such a switch, make sure that it is not blocked by ice. In conditions of high humidity inside the chamber, a build-up may occur on the mechanism ice crust, which physically prevents the lever from being moved to the “Off” position. In this case, it is necessary to carefully defrost the area around the switch without using sharp objects or a hair dryer.
| Switch location | Switch type | Indication | Features access |
|---|---|---|---|
| Inner wall | Button | Light bulb nearby | You need to remove food |
| Camera ceiling | Toggle switch | Absent | Requires a stepladder |
| Behind the shelf | Sensor | LED | Remove the shelf |
| Next to the thermostat | Slider | Mechanical | Combined with the t° setting |
Please note that in some designs the switch inside the camera only works to turn on. That is, once you start a process, you cannot stop it with a button - it must run a full cycle or be stopped through the main control panel, if there is one. Carefully read the instructions for your specific model, as the logic behind the internal switches is often unique.
Automatic shutdown and timer operation
One of the most common causes of concern among users is the question: “Why is the super freeze indicator on if I haven’t turned anything on?” In modern refrigerators Atlant with a system No Frost or electronic control, automatic activation logic is often implemented. If the sensors detect a sharp increase in temperature (for example, you put a bag of soup or often opened the door), the system itself starts an intensive cooling mode.
In addition, there is a time limit. The standard algorithm assumes super freezing for 24, 48 or 72 hours (depending on the model). After this time has expired, the system must independently turn off the mode and return the temperature to the set values. If the indicator goes out on its own after a day, this is normal operation of the automation, and not a malfunction.
However, if the mode has been on for several days, this may indicate that the timer is “stuck”. The electronic control module may have failed and the command to complete the cycle was not executed. In such cases, a manual reset (reboot) is the only effective method of solving the problem without calling a technician.
- ⏱️ Standard operating time of the mode: 24-48 hours.
- 🔄 Automatic start is possible when loading warm products.
- 📉 After shutdown, the temperature is restored gradually.
- 🔁 Timer failure requires rebooting the refrigerator.
It is important to distinguish between the indication of compressor operation and the indication of super freezing mode. Sometimes users mistake the flashing alarm indicator (high temperature) for the freeze mode light. If the indicator blinks, it means that the chamber is too warm, and the system is trying to fix it, but has not yet achieved the goal.
Possible malfunctions and diagnostics
If all of the above methods did not help disable super freezing, or the mode turns on chaotically without user intervention, you should think about a technical malfunction. Most often the problem lies in the temperature sensors or control board. If the sensor “lies” and shows that it is warm in the chamber, the refrigerator will endlessly try to bring in the cold, simulating the operation of a super-freeze.
It is also possible that the compressor switch-on relay itself, which is “stuck” in the on state, may fail. In this case, the compressor hums continuously, even if you have turned off all functions. This is a dangerous situation that requires immediate intervention, as the motor can burn out from overheating.
⚠️ Attention: If the compressor operates continuously for more than 2-3 days, and the temperature in the chamber drops below -30°C (products crack, oil in the can freezes), contact service immediately. This can lead to the destruction of plastic parts and seals.
Diagnostics should begin by checking the door seals. If the door does not close tightly, warm air constantly enters the chamber, and the refrigerator goes into constant operation mode, which looks like a super freeze. Check the cleanliness of the seal and the tightness of the door.
The table below shows the main symptoms and probable causes:
| Symptom | Probable cause | Solution |
|---|---|---|
| Indicator is on, the compressor is silent | Light burnt out/indication failure | Observation, temperature check |
| Does not turn off with button | Stuck contacts | Reboot, cleaning buttons |
| Works for days | Sensor or thermostat is faulty | Replace the sensor |
| Turns on by itself | Seal failure | Checking the seal |
Frequently asked questions (FAQ)
What will happen if you do not turn off super freezing on time?
Nothing catastrophic will happen to the products, they will just become very hard. However, the refrigerator compressor will wear out, which will shorten its service life, and electricity bills will increase significantly. In some models, an excessive amount of ice may form.
Is it possible to use the super freeze mode to cool drinks?
Technically it is possible, but not recommended. Sudden cooling of glass bottles can cause them to burst due to temperature changes. For drinks, it is better to use the standard cooling mode or select a separate shelf.
Why does the refrigerator make a loud noise after turning off super freezing?
This is normal. After intensive work, the refrigerant in the system is under different pressure, and the process of equalizing pressure in the tubes may be accompanied by gurgling and noise. The No Frost system fan could also turn on.
How long does it take to return to normal mode after a shutdown?
Usually it takes from 2 to 6 hours for the temperature to completely stabilize and the compressor to transition to normal cyclic operation. At this time, you should not load the chamber with new warm products.
Does super freezing affect the food in the refrigerator compartment?
In two-chamber refrigerators, the effect is minimal, but a slight decrease in temperature on the shelves adjacent to the freezer is possible. In single-chamber models, the effect will be more noticeable, and the food at the back wall may freeze.