How to correctly switch the temperature in an LG refrigerator: instructions for all models

Adjusting the temperature in the refrigerator LG is a task that every owner faces sooner or later. Not only food freshness, but also energy consumption, noise level and even the service life of equipment depend on the correct settings. However, control interfaces vary from simple mechanical knobs to touch panels with digital displays, which often causes confusion. LG range from simple mechanical pens to touch panels with digital displays, which often cause confusion.

In this article we will look at all the possible ways to change the temperature - from basic models LG with rotary controls to flagship ones InstaView Door-in-Door s system Smart ThinQ. You will learn what values ​​are considered optimal for the refrigerator and freezer compartments, how to reset the settings to factory settings, and what to do if the temperature does not change after adjustment. And also typical mistakes that lead to icing or spoilage of food.

If your refrigerator LG is equipped with the DoorCooling+ or Linear Coolingfunction, the setup process may have nuances. We have taken them into account in the instructions below. For models with inverter compressor (for example, series GA-B or GR-B), separate recommendations are also given, as they support smoother regulation without sudden temperature changes.

1. Determining the control type of your LG refrigerator

Before you start setting up, you need to understand what control system is installed in your model. The algorithm of actions depends on this. Refrigerators are divided into three main categories: - adjustment is carried out using rotary knobs or sliders (typical for budget models, for example, or outdated series). There is no digital indication here, and the temperature is set on a scale with divisions (usually from 1 to 7). LG are divided into three main categories:

🔹 Mechanical control — adjustment is carried out using rotary knobs or sliders (typical for budget models, for example, LG GC-B247SLQV or outdated series). There is no digital display, and the temperature is set on a graduated scale (usually from 1 to 7).

🔹 Electronic control with buttons - there are physical buttons on the front panel or inside the camera (+/– or Temp), and the current values are displayed on the LED or LCD display (popular in models LG GB-B459SLQZ or LG GR-B207SLKL).

🔹 Touch control with display —modern refrigerators (for example, LG InstaView GSX960MCZV or LG GR-D247SLKZ) are equipped with a touch panel that responds to touch. Advanced functions are available here like Smart Diagnosis or synchronization with a smartphone via LG ThinQ.

💡 How to quickly determine the type? Inspect the front panel of the refrigerator:

• 🔄 If you see round knobs with numbers, this is mechanics.
• 🎛️ If there are buttons and a small screen - electronic control.
• 📱 If the panel is smooth, without protruding elements, and responds to touch - touch.

⚠️ Attention: In some models LG (for example, LG GSL361PZXV) the freezer and refrigerator compartments have different types of control. For example, the freezer can be adjusted mechanically, and the main compartment - electronically. Always check both chambers!

2. LG refrigerator with mechanical control

Mechanical regulators are the simplest, but also the most inaccurate way of setting. There is no digital indication, so you will have to rely on conventional divisions and your own observations of the operation of the refrigerator.

🔧 Step-by-step instructions:

1. Open the refrigerator door (usually the regulator is located inside, on the on the right or left wall, less often on the top panel).
2. Find the rotary knob with marks from 1 to 7 (sometimes to 5 or 9). data-i="97">, not a specific temperature! cooling level, not a specific temperature!
3. Turn the knob clockwise to increase the cold (the number will increase), or counterclockwise to decrease.
4. For a freezer, the regulator is usually located inside it (on the top panel or wall).

❄️ Recommended settings for mechanics:

• 🥦 Refrigerator compartment: position 3–4 (corresponds to approximately +4…+5°C).
• ❄️ Freezer: position 4–5 (about –18°C).

⚠️ Important! After changing the position of the control, wait 6–8 hoursbefore checking the temperature with a thermometer. Mechanical systems require time to stabilize.

Make sure that the handle is locked in the selected position|Check that the door is closed tightly|Place the thermometer in the center of the chamber for control|Do not load the refrigerator with food immediately after changing the settings-->

3. Temperature adjustment in LG models with electronic control

Electronic control panels allow you to set the temperature with an accuracy of 1°C, which is especially important for storing sensitive products (for example, meat, fish or medicines). The setting algorithm depends on the location of the buttons:

📟 If the buttons are on the front panel (outside):

1. Find the button Temp (or Fridge/Freezer for individual cameras).
2. By short pressing, select the camera to configure (the corresponding indicator will light up on the display).
3. Use the buttons +/– (or ▲/▼) to set the desired value.
4. Confirm the selection with the button OK or wait for automatic saving (after 3-5 seconds).

📟 If the buttons are inside the camera:

1. Open the refrigerator or freezer door.
2. Locate the control panel (usually on the top or side wall).
3. Press Temp Control or a similar button, then adjust the value using the buttons +/–.
4. Close door - the settings will be saved automatically.

🔍 Example for model LG GB-B459SLQZ:

1. Press the "Fridge" button (refrigerator compartment).
2. Use the "+" or "–" buttons to set +4°C.
3. Press "Freezer" and set. –18°C.
4. Wait for the sound signal or the indicator blinking.

📊 Optimal temperatures for electronic models:

Touch panels are the most modern solution that offers LG in premium models (series InstaView, Door-in-Door or Signature). nuances for functions like Smart Cooling or DoorCooling+.

🖥️ Step-by-step instructions:

1. Touch the touch panel - the display is activated.
2. Select an icon Temp Control or Settings (depending on the model).
3. Touch the refrigerator or freezer icon.
4. Swipe up/down the scale or press the virtual buttons +/–to set the value.
5. Confirm the selection (in some models, just touch a free area of the screen).

• 🔄 Mode "Smart Cooling" automatically adjusts the temperature depending on the frequency of door opening and the load on the chambers. To disable auto-adjustment, go to Settings → Smart Features → Smart Cooling.
• ❄️ DoorCooling+ function distributes cold evenly across all shelves, but may require manual calibration when first setting up.
• 📱 Control via LG ThinQ: if the refrigerator is connected to Wi-Fi, the temperature can be changed through the application on the smartphone (available for models with Smart Diagnosis).

Even if you have configured the refrigerator correctly, incorrect placement of products can ruin your efforts. Here are recommendations for storage areas for models LG s multi-threaded cooling (for example, LG GR-B247SLKL):

🥩 Freshness zone (0…+1°C):

• 🍖 Raw meat and fish (no more than 2-3 days).
• 🥬 Greens, berries, mushrooms.
• 🧀 Soft cheeses (mozzarella, ricotta).