Hanging the refrigerator door LG is a task that every owner faces sooner or later. The reasons are different: inconvenient opening due to the layout of the kitchen, a change in the arrangement of furniture, or a banal desire to update the interior. However moving hinges it’s not just unscrewing the screws and rearranging the door. Errors here are fraught distorting the door, breaking the tightness or even breaking fasteners.
In this article you will find step-by-step instructions taking into account the features of the models LG (including series with a dispenser for water and ice), a list of necessary tools, as well as hidden nuanceswhich are not written about in standard manuals. For example, why the door may not close well after moving, and how to fix it without calling a technician.
If you have never done this kind of work, don’t worry: the process takes no more than 1-2 hours, and all the parts for hanging are usually included with the refrigerator. The main thing is to follow the algorithm and not skip key steps, such as adjusting the hinges after installation or checking the seal.
Preparation: tools and working conditions
Before you start transferring loops, make sure you have everything you need. Minimum set of tools includes:
- 🔧 Phillips screwdriver (or screwdriver with PH2 attachment)
- 🔨 Hex key (usually 5 mm, but check according to the instructions)
- 📏 Tape measure or ruler (to check gaps)
- 🧲 Magnet or screwdriver with a magnetic tip (to avoid losing screws)
- 🧴 Silicone grease (for the seal after installation)
Also prepare your workspace:
- 🚪 Give access to the refrigerator from all sides - you will need space to remove the door.
- 🧊 Remove all products and shelves from the door (they may get in the way or fall during dismantling).
- 📄 Find the instructions for the model - it contains a diagram location of hinges and holes for fastenings.
Important! If your refrigerator LG with a system No Frost, unplug it from the network for 10-15 minutes before work. This will prevent the fan from accidentally turning on during dismantling.
Hinge layout diagrams for different models LG
The design of the hinges depends on the series of the refrigerator. Below is a generalized version, but specify the diagram for your model in the instructions - especially if you LG InstaView or Side-by-Sidewhere the door is heavier due to additional functions.
| Model type | Quantity hinges | Fastening features | Additional details |
|---|---|---|---|
| Single door (without freezer) | 2 hinges (top + bottom) | Symmetrical holes for fastening on both sides | — |
| Two-door (freezer at the bottom) | 4 hinges (2 for the refrigerator, 2 for the freezer) | The upper hinges are often universal, the lower ones are height-adjustable | Lid for closing old ones holes |
| With dispenser | 4 loops + fastening for hoses | Additional holes for wiring, care required when relaying cables | Terminals for disconnecting wires |
| Side-by-Side | 6 hinges (3 for each door) | Complex alignment system, often requires an assistant | Special key for adjustment |
Most models LG holes for hinges are already provided with factory, but closed with plugs. If there are no plugs, this means that the model does not support hanging the door (for example, some budget series). In this case, you will have to drill new holes, which requires experience.
How to find hidden holes for hinges?
Inspect the side walls of the refrigerator - they are usually marked with small indentations or stickers. If they are not there, shine a flashlight at an angle: the plastic plugs can match the color of the case.
Step-by-step instructions: how to remove the door of an LG refrigerator
The dismantling algorithm is the same for most models, but there are nuances for refrigerators with a dispenser. Follow the instructions strictly in order:
- Unplug the refrigerator from the mains and wait until the light inside goes out (this means that the power is completely turned off).
- Remove the decorative covers from the hinges (they are usually snapped or secured with one screw).
- Unscrew the top hinge —it holds the main weight of the door. Hold the door so that it does not fall!
- Carefully remove the door from the bottom hinge, lifting it up. If the door is “jammed”, check if the seal is in the way.
For models with a dispenser:
- 💧 First disconnect the water supply hose (usually it is attached under the bottom hinge).
- 🔌 Disconnect the dispenser power connector (it may be hidden under the decorative panel).
Attention! Do not pull the door towards you - it is heavier than it seems, especially if there is an ice maker built inside. It is better to work with an assistant.
Take a photograph of the location of the hinges|
Disconnect the refrigerator from the mains|
Release the door shelves|
Prepare a place for installation doors (soft bedding)-->
Moving hinges to the other side: key points
When the door is removed, proceed to install the hinges on the opposite side. It is important here:
- Check the completeness of the parts —in the box with the refrigerator there should be plugs for old holes and screws for new ones.
- Move the bottom hinge first —it sets the height position of the door.
- Use standard holes —if they are not there, do not drill the housing yourself (risk of damaging the freon system).
For models with automatic ice maker:
- ⚙️ Move fastening for the water supply hose to the other side (usually it is symmetrical).
- 🔄 Check if the hose is twisted after hanging - this may block the water supply.
After installing the loops do not rush to hang the door. First check:
- 📏 The distance between the hinges on both sides (must match the original one).
- 🔩 All screws are tightened all the way, but without tightening (you can break the thread).
Installing the door and adjusting: avoiding distortions
Now the most important step is to hang the door back. Follow the algorithm:
- Carefully place the door on lower hingelifting it all the way.
- Align the upper part and secure top loop (do not tighten the screws all the way!).
- Check the gaps around the perimeter of the seal - they should be the same (1-2 mm).
- Close the door and check how it fits. If there is a misalignment, loosen the screws and adjust the position.
For models with a dispenser:
- 🔌 Connect the power connector and water supply hose.
- 💦 Check the tightness of the connections - a leak can damage the electronics.
Critical moment: if after installation the door opens spontaneously, this means that the refrigerator is not level. Use the adjusting feet to level the body.
How to check the tightness of the seal?
Take a piece of paper, close the door and try to pull it out. If the sheet comes out easily, the seal requires adjustment or replacement.
Common mistakes and how to avoid them
Even with careful installation, you can make mistakes that will lead to problems in the future. Here are the most common:
- 🔧 Overtightened screws - this will deform the hinges and complicate future adjustments. Tighten all the way, but without fanaticism.
- 🚪 Ignoring plugs —open holes collect dust and moisture, which leads to corrosion.
- 🔄 Incorrect procedure —if you first secure the top hinge, the door may "fall" on its side.
- 💧 Damage to the dispenser hose —kinks or cracks will lead to leaks.
If the door closes poorly after moving the hinge, check:
⚠️ Attention! The seal could have moved during work. Warm it up with a hairdryer (temperature up to 50°C) and shape it with your hands - this will restore elasticity.
For models with an electronic display (for example, LG ThinQ) after rehanging, you may need reset settings. To do this:
- Turn off the refrigerator for 5 minutes.
- Turn on and hold the button
Ice Plus(orSmart Diagnosis) for 10 seconds.
FAQ: answers to popular questions
Is it possible to hang the door on an LG refrigerator yourself if you have no experience?
Yes, this is possible even for beginners, if you strictly follow the instructions. The main thing is to take your time and check each stage. For models with a dispenser, it is better to invite an assistant, since the door is heavier due to additional mechanisms.
What to do if, after moving the hinge, the door does not close tightly?
The reasons may be different:
- 🔧 The hinges are not adjusted to the level (you need to loosen the screws and align).
- 🚪 The seal is deformed (heat it with a hairdryer).
- 🏠 The refrigerator is crooked (adjust the legs).
Start by checking the hinges - in 80% of cases the problem is solved by tightening them.
Do I need to call a technician to rehang the door on the LG Side-by-Side model?
For Side-by-Side the process is more complicated due to the weight of the doors and the number of hinges. If you are not confident in your abilities, it is better to contact a specialist - installation errors can lead to damage to the opening mechanism.
Where can I get plugs for old holes if they are lost?
Plugs can be:
- 🛒 Buy at a service center LG (specify the model of the refrigerator).
- 🔧 Pick up universal plastic plugs in a furniture fittings store.
- 🎨 Paint the holes in the color of the body (temporary solution).
How often can you rehang the refrigerator door?
Technically - as much as you like, as long as you don’t damage the holes. However, each movement of the hinges weakens the fastenings, so it is better not to abuse it unnecessarily.