How to hang the door of a Samsung refrigerator: step-by-step guide with video and diagrams

Re-hanging the refrigerator door Samsung is a task that every owner faces sooner or later. The reasons may be different: moving, kitchen renovation, inconvenient handle placement, or simply the desire to optimize space. Fortunately, most models Samsung (with the exception of some premium series) support reversible door fastening, which allows you to perform the procedure yourself without calling a specialist.

However, before you take up a screwdriver, it is important to consider several key points. Firstly, not all models are the same: refrigerators with No Frost and drip defrosting systems may have different hinge fastenings and the location of the drainage holes. Secondly, improper dismantling can lead to damage to the seal or breaking the seal of the chamber. In this article we will analyze the process using the example of popular models Samsung RB, RT and RS, and also provide video instructions and diagrams for visual understanding.

If you have never done such work, do not worry: with the right approach Re-hanging the door will take no more than 1–1.5 hours. The main thing is to follow the instructions and not skip important steps, such as rearranging the drainage tube (if your model has it) or adjusting the door level after installation. For clarity, we have added interactive checklists and warnings about common errors that will help you avoid problems.

1. Preparation: tools and safety

Before you start work, prepare everything you need. Without the right tools, you risk damaging plastic parts or fasteners. Here is the minimum set that you will need:

• ✅ Phillips screwdriver (usually size PH2 is suitable)
• ✅ Flat screwdriver (for prying up decorative plugs)
• ✅ Wrench (most often on 10 mm, but check by model)
• ✅ Making tape (to fix the door during work)
• ✅ Level (to check the evenness of the installation)
• ✅ Assistant (the refrigerator door is heavy, especially on models Side-by-Side)

Also prepare the workspace: free access to the refrigerator from all sides, unplug it and defrost (if the model is not No Frost). This will prevent moisture from entering the electrical contacts and simplify dismantling. Do not forget that the weight of the door can reach 15–20 kg (for models Samsung RS6*), so it is unsafe to work alone.

⚠️ Attention: If your refrigerator is equipped with water dispenser (model RF23*, RS27*), hanging the door will require additional manipulations with the water supply pipes. In this case, we recommend that you refer to the official instructions or video from Samsung, since incorrect connection can lead to leaks.

2. Determining the model and type of fasteners

Not all refrigerators Samsung have the same hinge design To avoid mistakes, first determine the series of your model. Usually the name is indicated on the sticker inside the chamber. or on the back wall. For example:

• RB37J5*** —two-chamber with bottom freezer, standard hinges.
• RS68N8*** — Side-by-Side, requires rearranging the drainage.
• RT28K5*** —single-chamber, simplified fastening system.

Next, check the type hinges:

• 🔧 Hidden hinges (found in models Bespoke and premium series) - require careful removal of decorative panels.
• 🔧 Open hinges (most budget models) - fastened with bolts accessible from the outside.
• 🔧 Hinges with latches (models No Frost) - may have additional latches for tightness.

For models Side-by-Side (for example, Samsung RF23HCEDBSR) the process is complicated by the need for synchronous rearrangement of both doors. In this case, it is better to follow video instructions below, since the text description may not be clear enough.

How to find instructions for your model?

If you are not sure about the type of fasteners, enter the name of the model on the website Samsung Support (section "Manuals and downloads"). PDF instructions with detailed diagrams are available. An alternative is to search for "model name door reversal guide" on. YouTube.

3. Step-by-step door rehanging: universal instructions

The following are instructions suitable for most two-chamber models Samsung (for example, RB30J3*, RT28M*). For Side-by-Side and refrigerators with a dispenser, see special section.

Step 1. Removing the top hinge

1. Close the door and secure it with masking tape to prevent falling.
2. Remove the decorative plug of the top hinge (pry it off with a flat screwdriver).
3. Unscrew the bolts with a Phillips screwdriver (usually 2-3 pieces).
4. Hold the door, carefully remove it from the top pin.

Step 2. Removing the lower hinge

1. Unscrew the bolts of the lower hinge (a wrench may be required).
2. Remove the door and place it on a soft surface (for example, a blanket) so as not to damage the coating.
3. Remove the pin from the lower fastening.

Step 3. Rearranging the loops to the other side

• 🔄 Transfer the upper and lower loops to the opposite side using the existing holes (they are usually closed with plugs).
• 🔄 If there are no holes, you will have to drill them (the diameter is indicated in the instructions for the model).
• 🔄 Make sure that the hinges are installed mirrored in relation to the original position.

Step 4. Door installation and adjustment

1. Place the door on the lower pin, then fix the upper hinge.
2. Tighten the bolts, but not all the way - leave some play for adjustment.
3. Check the level of the door: it should open smoothly and close under its own weight.
4. If necessary, adjust the height of the hinges (some models have adjusting screws).

All bolts are tightened, but not overtightened|The seal is not twisted and tight fits|The door opens/closes without effort|The drainage tube (if any) is moved to the other side|The level is checked (the door is not warped)

-->

4. Features for models with No Frost and Side-by-Side

Refrigerators Samsung with system No Frost (for example, RB37A*, RS55*) have additional nuances:

• 🌬️ Drainage pipe must be moved to the other side along with the door, otherwise condensation will accumulate in an unintended place.
• 🔌 The heating element of the seal (if present) requires careful disconnection and reconnection.
• ⚙️ Ventilation grilles may have an asymmetrical fastening - check their position after rearrangement.

For models Side-by-Side (for example, Samsung RS68N8841S9) the process is more complicated:

1. First remove top panel (it is secured with latches or bolts).
2. Disconnect dispenser tubes (if any) and drain the water.
3. The doors are removed one by one, starting with freezer cameras.
4. After rearranging the hinges, be sure to adjust door synchronization (they must close at the same time).

⚠️ Attention: In models Side-by-Side s ice maker (for example RF23HCEDBSR) re-hanging the door may require relocating the water lines. If you are not confident in your skills, it is better to contact a specialist - an error will lead to leakage and short circuit.

5. Typical mistakes and how to avoid them

Even if you follow the instructions, you can make mistakes that will lead to problems. Here are the most common of them:

Another common problem is door skew after installation. This occurs due to uneven tightening of the bolts or incorrect adjustment of the hinges. To avoid this:

• 📏 Use a level to check horizontality.
• 🔧 Tighten the bolts crosswise (like the wheels of a car).
• 🔄 After installation, open the door 90° - it should remain in this position, without closing or opening further.

If, after rehanging, the refrigerator begins to hum more strongly, check:

• 🔊 Whether the door is touching the body (vibration may occur).
• 🔌 Are the dispenser wires connected correctly (if any).
• ❄️ Is the seal blocking the ventilation holes (relevant for No Frost).

6. Video instructions for different models

For clarity, we have selected proven videos from step-by-step process of re-hanging the doors Samsung. Please note the compliance of the model:

• 📺 Two-chamber models (RB, RT): [Video: Re-hanging the Samsung RB37 door](https://www.youtube.com/watch?v=example1)
• 📺 Side-by-Side (RS, RF): [Video: Relocating doors of Samsung RS68N8](https://www.youtube.com/watch?v=example2)
• 📺 With dispenser water: [Video: Rearranging a door with an ice maker](https://www.youtube.com/watch?v=example3)

⚠️ Attention: In some videos, the authors skip the step of moving the drainage tube (especially in models No Frost). If your refrigerator has a drainage hole at the bottom of the door, be sure to move it to the other side, otherwise water will accumulate in the chamber.

If you did not find a video for your model, search for: "Samsung [your model] door reversal"

For example:

"Samsung RB31FERNCSA door reversal"

7. doors in models with a dispenser and an ice maker

Refrigerators Samsung with a water dispenser (series RF, RS with the suffix HCED or HCEF) require a special approach here, in addition to hinges. you will have to work with:

• 💧 Water supply pipes —they need to be disconnected and moved to the other side.
• ⚡ Dispenser wiring —it is usually attached to clips inside the door.
• ❄️ Ice maker (if any) - its tray also requires rearrangement.

Step-by-step instructions for models with a dispenser:

1. Turn off the water supply and drain the water from the system (press the dispenser button until the water stops leak).
2. Remove the front panel of the dispenser (usually it is secured with latches).
3. Disconnect the water tubes (use pliers, but do not pinch the hoses!).
4. Carefully remove the electrical wiring from the door and transfer it to another side.
5. After reversing the door, connect the tubes and wires in the reverse order.
6. Check the tightness of the connections (place a napkin and press the dispenser - if water does not drip, everything is fine).

⚠️ Attention: If after reversing the dispenser does not work or the error indicator is blinking, check:

• 🔌 The connectors are connected correctly (they should click when connected).
• 💧 The presence of water in the system (sometimes pumping is required - hold the dispenser button for 30 seconds).
• ❄️ Sensor position ice (in models with an ice maker).

For models with ice maker (for example, Samsung RF23HCEDBSR) after rehanging, you may need sensor calibrationFor this:

1. Unplug the refrigerator for 1 minute.
2. Turn on and hold the buttons Ice Type + Child Lock 5 seconds until you hear a beep.
3. Wait for automatic setup (may take up to 10 minutes).

8. Checking the result and final tips

After hanging the door, perform the following mandatory check:

• 🔹 Tightness: place a sheet of paper between the seal and the body. If it falls out, the seal requires adjustment.
• 🔹 Level: the door must be level, without distortions. Use a building level.
• 🔹 Functionality: check the operation of the dispenser (if any), lighting and display.
• 🔹 Noise: after switching on, the refrigerator should not vibrate or hum loudly.

If everything is in order, plug in the refrigerator and let it work for 2-3 hours. Then check:

• 🌡️ Temperature in the cells (must correspond to the specified one).
• ❄️ Lack of frost on the seal (a sign of poor tightness).
• 💧 Dryness in the drainage hole (no accumulation of water).

🔧 Tips for durability:

• 🧼 Wipe the seal with a weak solution of vinegar after rearranging - this will prevent mold from appearing.
• 🔄 Once every 6 months, check the fastening of the hinges and, if necessary, tighten the bolts.
• 🚪 Avoid abruptly opening the door in the first days - the seal must “get used” to the new position.

If a week after rehanging you notice that the refrigerator has become turns on more often or does not freeze well, the likely cause is a violation of the seal. case:

1. Check the seal for gaps (use a flashlight to illuminate the gaps).
2. Adjust the hinges so that the door fits tighter.
3. If the seal is deformed, replace it (part numbers for Samsung can be found by model).

FAQ: Frequent. questions about hanging Samsung doors

❓ Is it possible to hang the door on a Samsung refrigerator without an assistant?

Technically it is possible, but it is highly not recommended. The refrigerator door weighs 15-20 kg, and without support it is easy to drop it, damaging the hinges or the body. If there is no assistant, use safety belts or. place a soft blanket under the door.

❓ What to do if, after hanging, the door does not close tightly?

The reasons may be different:

1. Hinges are skewed - loosen the bolts and adjust level.
2. The seal is deformed - warm it with a hairdryer or replace it.
3. Magnets are in the way - check their position (in some models they are removable).

If the problem persists, remove the door and repeat the installation.

❓ Is it necessary defrost the refrigerator before hanging the door?

If you have a model with drip defrosting, defrosting is required - otherwise water may get on the electrical contacts. For No Frost it is enough to unplug the refrigerator for 30 minutes before work.

❓ Is it possible to hang the door on a Samsung refrigerator with a touch screen?

Yes, but special care is required. In models with a display (for example Samsung Family Hub), the wires run inside the door. When dismantling:

• Disconnect the display connector (usually it is located under the top panel).
• Do not pull the wires - they are fragile!
• After rearranging, check the operation of the display before turning on the refrigerator.

If the display does not light up, check connector contacts.

❓ How much does it cost to rehang the door of a Samsung refrigerator in a service center?

The cost of work in official service centers Samsung is 1,500–3,500 rubles (for 2026). The price depends on:

• Refrigerator model (for Side-by-Side more expensive).
• The need to relocate the drainage or dispenser.
• Region (in Moscow and St. Petersburg it is usually more expensive than in the regions).

Independent re-hanging will only cost the cost of the tools (if you don’t have them at hand).