Changing the kitchen layout or simply The desire to make the interior more comfortable often dictates its own conditions. In such a situation, owners of household appliances are faced with the question of how to move the refrigerator doors Beko to the other side. This procedure does not require calling a technician if you have basic skills in handling tools and an understanding of the unit's structure. Correctly performed re-hanging will ensure comfortable opening and closing, and will also extend the life of the seals.
Modern models of the Turkish brand are designed taking into account the possibility of reverse opening. However, despite the thoughtfulness of the design, the process requires care. Violation of the sequence of actions may lead to misalignment of the sash or damage to decorative elements. In this material, we will analyze all the nuances so that you can complete the job efficiently and safely.
Necessary tools and preparation of the workplace
Before starting any manipulations with the body of household appliances, it is necessary to prepare the appropriate tools. You will not need complex professional equipment, but having high-quality tools will make the task easier. Phillips screwdriver You will need to dismantle most fasteners, and you may also need a wrench, the size of which depends on the model of your unit.
It is also worth taking care of protecting the floor covering, since the refrigerator has significant weight. Place thick cardboard, an old blanket or a soft rag under the device. This will protect the floor from scratches in case parts accidentally fall or the body moves during operation.
An important step is to free up the internal space. It is better to remove shelves, drawers and containers in advance to lighten the structure and eliminate broken glass. Be sure to disconnect the device from the power supply before starting work, to avoid the risk of electric shock or short circuit if the wiring is accidentally damaged.
☑️ Preparation for rehanging doors
Removing the top panel and handle
The process starts from the top of the case. On most models Beko the top cover is secured with screws, which can be hidden under decorative plugs. Carefully pry up the plastic pieces with a flathead screwdriver or knife to gain access to the fasteners. Be careful not to break the plastic clips.
Once the screws are removed, the top panel can be removed. In some models, the top handle will also have to be removed along with it, if it is not part of the door leaf. To do this, unscrew the screws holding the handle and remove it, having previously memorized or photographed the location of the parts.
⚠️ Attention: Decorative plugs are often made of fragile plastic. At low temperatures (if the refrigerator has just been defrosted), they may crack, so let the unit warm up to room temperature.
If your model is equipped with a decorative trim, it must also be removed. It is usually held in place by latches or small screws. Place the removed parts in a separate container so as not to lose them during operation. top hinge with a decorative trim, it also needs to be removed. It is usually held in place by latches or small screws. Place the removed parts in a separate container so as not to lose them during work.
Removing the door and rearranging the hinges
The most crucial moment is removing the door leaf. The top hinge acts as a lock, so after it is loosened, the door must be held. Have a helper support the sash while you completely remove the mounting bolts. You cannot jerk the door sharply, as this may damage the lower pin.
After removing the door, you must remove the lower hinge. It is usually hidden under a plastic cover at the bottom of the case. Unscrew the fasteners and remove the axle. Now you can start rearranging the elements to the opposite side. On the free side of the case you will find technological holes closed with plugs.
- 🔧 Unscrew the plugs from the holes on the new side of the installation.
- 🔧 Install the plugs in the vacant holes on the working side.
- 🔧 Move the bottom loop to the new side and secure it bolts.
- 🔧 Set the axis of the lower hinge to a vertical position.
Next, the door leaf is put on the lower axis. It is important to get into the hole accurately so as not to damage the threads or the axle itself. After installing the door, the top hinge is mounted on top. The upper hinge bolts do not need to be fully tightened yet; leave a small gap for subsequent adjustment.
What to do if the holes do not match?
In some models, rehanging requires rearranging the locking pins inside the hinge itself. If the holes on the body do not match the holes on the door, check the instructions for the specific model - you may need to change the configuration of the hinge itself by turning it over or moving the fixing element.
Adjusting the door position and gaps
After installing all the elements in new places, it is necessary to make adjustments. The door should fit snugly around the entire perimeter of the body, without distortion. If you notice that the sash is skewed or does not fit at the bottom, the height will need to be adjusted.
Adjustment is carried out using the adjustment screws located on the front of the bottom hinge. By rotating them, you can raise or lower one of the door corners. A clockwise movement usually leads to an increase in the angle, and a counterclockwise one to a decrease.
| Problem | Probable cause | Remedy |
|---|---|---|
| The door does not fit on top | Bottom the corner is lowered | Raise the corner with the adjusting screw |
| The gap at the bottom is too large | The door is skewed upward | Lower the top corner or raise the bottom |
| The door opens itself | Tilt the body back | Unscrew the front legs of the refrigerator |
| It is difficult to open the door | The fit is too tight | Check the adjustment and lubricate the seal |
After completing the adjustment, check the operation of the opening mechanism. The door should open smoothly, without creaking or jamming. Make sure that when open, it does not tend to slam shut spontaneously or, conversely, move beyond 90 degrees if this is not provided for by the design.
Rearranging handles and decorative elements
The final stage is installing handles and plugs in new places. If your model involves rearranging the handles (for example, vertical handles on two-door models), then you need to dismantle them on one side and install them on the other. To do this, use the same holes that were previously closed with plugs.
Carefully monitor the orientation of the handles. They can be symmetrical or have a clear upper and lower position. An error during installation will result in the handle pointing in the other direction or the fastening will not match. Visual inspection Before tightening the bolts, it is mandatory.
All vacant holes on the old side are closed with plastic plugs. They are inserted with light pressure until a characteristic click is heard. If the plugs have threads or screw fastenings, carefully tighten them, being careful not to break the threads in the plastic case.
Tightness check and testing
After assembly, you need to make sure that the refrigerator compartment is tight. Close the door tightly and try to stretch a piece of paper around the perimeter of the seal. If the sheet is removed with force along the entire contour, then the fit is good. If the paper slides freely in some place, additional adjustment of the hinges is required.
It is also worth paying attention to the operation of the magnetic lock. The door should close on its own when approaching the body at a distance of about 2-3 centimeters. If this does not happen, check if something is preventing it from closing (for example, an incorrectly installed shelf or product).
⚠️ Attention: After rearranging the doors and plugging in the refrigerator, let it idle for 2-3 hours before loading food. This will stabilize the temperature regime and ensure that the compressor operates correctly after transportation tilts.
Plug in the device and set the required temperature. During the first hours of operation, listen to the sounds: whether there are any new vibrations or knocks that could occur due to a change in the position of the unit or a loose fit of the panels.
Possible difficulties and their solutions
In the process of work, you may encounter a number of difficulties. For example, screws may be over-tightened or become soured over time. In this case, do not use excessive force to avoid tearing off the splines. Use a penetrating lubricant (such as WD-40), apply it to the threads and wait 10-15 minutes.
Another common problem is missing parts. If you're working without a helper, it's easy to drop a small screw behind the refrigerator. To avoid this, use a magnetic tray or cloth around your work area. A lost bolt can cause serious damage if it gets into the compressor or fan.
If after all the manipulations the door is still warped, check the floor. Uneven floors are a common cause of problems with refrigerators. Use a spirit level to check the level and adjust the unit's support legs. Only after leveling the case does it make sense to fine-tune the hinges.
Is it possible to rearrange the door on a refrigerator with the No Frost system?
Yes, on most models Beko with the system No Frost reversing the door is possible. However, be careful with the wires going to the display or door light. They may need to be carefully disconnected and reconnected to the appropriate connectors on the other side, or simply carefully transferred to the provided channel.
Do you need to defrost the refrigerator before rehanging?
Full defrosting is not necessary if you work quickly. However, if there is a lot of ice in the freezer, it is better to wait until it melts to prevent water from pouring out when tilting or removing the door. In addition, warm plastic is less fragile.
What to do if there is not enough length of the wires when rehanging?
In the original design, the wires usually have a reserve length for rearranging. If the wires are stretched, check that they are laid correctly in the cable channels. Under no circumstances should you extend the wires yourself, this will violate the warranty and can be dangerous.
Will the warranty remain valid after re-hanging it yourself?
According to the law, the consumer has the right to independently repair or service if this does not lead to a breakdown. However, if you break threads or damage the housing during rehanging, your warranty may be void. Proceed carefully.