Refrigerators Position have proven themselves to be reliable equipment that can operate for years without failures. However, during operation, there is often a need to change the internal space: to make room for a tall pan, to place food more conveniently, or simply to do some general cleaning. The standard configuration does not always suit the changing needs of the family, so the ability to properly adjust the shelves becomes a useful skill.
The rearrangement process may seem trivial, but the models Pozis have their own design features, ignoring which can lead to damage to the glass or plastic stops. This is especially true for modern series with system AntiShock and telescopic guides. Incorrect handling of the fixing mechanisms often causes the shelf to fall out when loaded with products.
In this article we will analyze in detail the algorithm of actions for various types of shelves found in refrigerators of this brand. You will learn how to safely remove the glass base, move the limiters to a new height and avoid common mistakes that can lead to breakage plastic elements.
Preparation for work and safety precautions
Before starting any manipulations inside the refrigeration chamber, you must make sure that you will not harm either the equipment or yourself. Although rearranging shelves does not require unplugging the appliance, there is a risk of spilling jars or dropping heavy glass on your feet. Therefore, the first step should always be unloading the area you plan to work with.
Empty the shelf of all food and utensils. If the glass is cold and the room is warm, a sudden temperature change when in contact with warm hands or surfaces may be undesirable, although tempered glass Pozis is quite stable. However, allow the parts to warm up to room temperature a little if the refrigerator has just been defrosted.
⚠️ Attention: Never try to forcefully pull out the shelf if you feel resistance. Fixing mechanisms in refrigerators Position may have hidden latches or stoppers that must first be unlocked.
Prepare a soft surface next to the refrigerator - cover a table or part of the floor with a towel. This place will serve as temporary storage for the removed glass, protecting it from chips and scratches. It is also worth having a dry rag on hand to remove condensation from the inner walls of the chamber.
☑️ Preparing to rearrange the shelves
Features of the Pozis shelf design
In refrigerators Pozis mainly two types of shelf designs are used: classic with plastic limiters-rails and modern telescopic systems. Understanding the difference between them is critically important, since their dismantling algorithm is radically different.
Classic shelves are a glass platform lying on plastic guides, which, in turn, are inserted into holes on the back and front walls of the chamber. Here glass has no rigid fixation and is held in place by weight and sides. In more expensive models, telescopic guides are used, where the glass is inserted into a metal or plastic frame with wheels.
The system AntiShock, implemented in new models, deserves special attention. It assumes the presence of special shock-absorbing elements in the places where the glass is attached to the frame. When rearranging such shelves, it is important not to lose the small rubber gaskets, since without them the glass will rattle when the door is closed.
| Shelf type | Base material | Fixing mechanism | Difficulty of removal |
|---|---|---|---|
| Classic | Tempered glass | Plastic rails | Low |
| Telescopic | Glass in frame | Guides with rollers | Medium |
| AntiShock system | Glass with shock absorption | Clamps + rubber bands | High |
| Balcony (door) | Plastic | Latches in the door | Medium |
How to remove a classic glass shelf
If in your refrigerator Pozis a regular shelf is installed on plastic guides, the process of removing it will take no more than a minute. The main rule here is to lift the glass strictly vertically. Tilt may cause the corners of the glass to catch on the edges of the chamber or the mating parts of the rails.
Grip the front edges of the glass, closest to the corners, with both hands. Make sure your fingers don't slip; the surface may be slippery from condensation. Smoothly but confidently lift the glass up 2-3 centimeters to disengage from the side stops, and pull it towards you.
After the glass is removed, you need to remove the plastic guides (rails) themselves if you plan to change their height. They are simply removed from the holes in the wall of the refrigerator with a slight upward or forward movement, depending on the design of the particular model. Do not use excessive force; the plastic in old refrigerators can be brittle.
When reinstalling, make sure that the glass lies flat on all four supports. A misalignment can lead to the fact that when placing a heavy pan, the glass will burst due to uneven distribution load.
Dismantling telescopic shelves and AntiShock systems
With telescopic shelves the situation is more complicated. In models Pozis with such a system, glass is often inserted into a metal frame that moves along guides. To remove such a structure, you usually need to unlock the stoppers.
Find special clamps on the side walls of the frame. In most cases, these are levers or buttons located at the front of the runners. Pressing them (or lifting them) releases the wheels, and the entire structure can be pulled out all the way and, by lifting the front part, removed from the guides.
⚠️ Attention: Telescopic guides have a complex mechanism. When removing, hold the shelf horizontally so that the rollers do not jump out of the grooves sharply and damage the interior of the refrigerator.
If we are talking about the system AntiShock, then it is important to pay attention to the rubber shock absorbers. They can be placed on the corners of the glass or built into the frame. When removing the glass, try not to overstretch these elastic bands so that they do not lose their elasticity over time.
What to do if the shelf is stuck?
If the telescopic shelf is stuck and does not extend, check to see if any object (for example, a label from a package) is caught between the roller and the guide. Do not pull sharply - it is better to shine a flashlight and carefully remove the obstacle with tweezers.
Rearranging the limiters to a new height
After the shelves are removed, the opportunity opens up to reorganize the space. On the inner walls of the refrigerator compartment Position there are many holes for installing limiters at different heights. This allows you to adapt the volume to tall bottles or low containers.
Determine the desired installation level. Insert the plastic stops into the corresponding holes until you hear a characteristic click or stop. Make sure that the left and right stops are exactly at the same level. Use your eyes as a level - a visual check can often help avoid misalignment.
If you are using long metal or plastic slats that go across the entire chamber, insert them into the back holes first, then carefully push them forward to the front. Make sure that the rail fits tightly into the grooves and does not dangle.
Do not change their location unless absolutely necessary, if the design does not allow for variability.
Installing shelves on the refrigerator door
Shelves on the door (balconies) in refrigerators Pozis are also adjustable, although not as often as the main shelves. They are mounted on special slides or latches built into the plastic door trim.
To remove such a shelf, you usually need to lift its front edge up and then pull it towards you. Some models require you to first remove the side stops (sides) that keep the shelf from falling. Proceed with caution, as the plastic of the door is more fragile than the metal of the chamber.
When installing to a new height, make sure that the shelf fits tightly into the grooves. The refrigerator door constantly experiences vibration when opening and closing, so a poorly secured shelf may begin to rattle or fall along with its contents.
- 🧊 Check that the new height of the shelf does not block access to other compartments of the door.
- 🥛 Make sure that tall bottles on the new shelf will not rest against the top shelf of the door when closing.
- 🚪 When closing the door, listen: is there a knock of a loose shelf on the walls.
Common mistakes and care tips
One of the most common mistakes is installing warm glass in a cold refrigerator or vice versa. Although tempered glass Pozis tough, thermal shock is its main enemy. Always allow the parts to reach ambient temperature before installation.
Also, users often forget to wipe the places where the limiters are attached. Dirt and sticky residue accumulated there can prevent the plastic from fitting tightly, causing the shelf to wobble. Regular washing of these elements will extend the life of the entire structure.
Do not overload the shelves. Despite manufacturers' assurances about strength, each shelf has a limit load (usually 25-30 kg). Distribute the weight of the products evenly, avoiding concentration of gravity in the center or on one edge.
⚠️ Attention: If you notice a crack in the glass, even a microscopic one, replace the shelf immediately. In conditions of constant vibration and temperature changes, the crack will quickly grow, and the shelf will collapse at the most inopportune moment.
Where to buy spare parts?
Original shelves and limiters for Pozis refrigerators can be ordered at the brand’s official service centers or from partners. When ordering, be sure to indicate the exact model of the refrigerator, since the fastenings may differ even within the same series.
Conclusion
Proper organization of the space inside the refrigerator Position not only improves ergonomics, but also contributes to the proper storage of food. Knowing how to safely remove and rearrange the shelves, you can easily adapt the equipment to your needs at any time.
The main thing is to be careful, take into account the type of fastening and not use force where careful movements are needed. Follow the instructions, and your refrigerator will last for many years, enjoying ease of use.
Can the shelves be washed in the dishwasher?
Glass shelves Pozisare usually made of tempered glass, which is resistant to high temperatures. However, plastic stops and frames may become warped in the dishwasher. It is recommended to wash the glass by hand or select the delicate mode, and wash the plastic only by hand with warm water and a mild detergent.
What to do if the limiter is broken?
If the plastic limiter is cracked or broken off, you cannot use the shelf - the glass may fall. A new part must be ordered. You can temporarily use a support, but it is not safe. Contacts for service centers are on the manufacturer's official website.
Why does the shelf rattle when the door is closed?
The shelf can rattle for several reasons: the stops are not tightly inserted, there is no rubber shock absorber (in AntiShock models) or the shelf is installed skewed. Check the tightness of all elements and the presence of rubber gaskets.
Can the shelf withstand a heavy pot of soup?
A standard refrigerator shelf Pozis is designed for a uniform load of up to 25-30 kg. A heavy pan (5-7 liters) is quite acceptable if it is placed in the center of the shelf. However, placing several of these pans side by side or placing them at the very edge is not recommended.