Refrigerators Pozis are deservedly popular due to their reliability and spaciousness, however, the standard layout of the internal space does not always satisfy the needs of every user. Often there is a need to place a tall pan on a shelf, a cake on a stand, or large bottles that do not fit between standard levels. At such moments, the only correct solution is to move the glass insert to another level or change the configuration of the freshness zone.
This process seems trivial, but the design of refrigeration chambers Pozis has a number of specific features, ignoring which can lead to breakage of plastic fasteners or even breaking of tempered glass. Incorrect dismantling often causes cracks to appear at the ends of the shelves, which subsequently leads to their complete destruction. Therefore, it is important to clearly understand the sequence of actions and know where the hidden latches are located.
In this article we will analyze in detail the algorithm of actions for various models, including series Ryabinka and classic two-chamber options. You will learn how to safely remove the shelf, what tools you may need and how to correctly install it to a new height to ensure a stable position for any products.
Design features of Pozis refrigerator shelves
Before you begin physical manipulation, you need to understand the structure of the internal chamber of your unit. Most models Pozis use shelves made of tempered glass, which are supported by special plastic guides or stops built into the walls of the chamber. Tempered glass has high compressive strength, but is extremely vulnerable to pinpoint impacts on the edges.
The mounting system may differ depending on the year of manufacture and series of the refrigerator. Older models often have simple metal or plastic runners into which the glass is inserted. Modern rulers use more complex systems with telescopic slides or hidden grooves. Understanding the type of mounting system you have is the key to a successful relocation without damage.
⚠️ Warning: Never try to forcefully pull out a shelf if it is stuck. Mechanical force can break the plastic latches, which in refrigerators Pozis are often non-removable elements of the case.
It is also worth considering that some shelves are equipped with additional elements, such as drawers for vegetables or areas for bottles. These elements may have their own locking mechanisms that must be unlocked before removing the main glass plate. Ignoring these nuances leads to the most frequent breakdowns.
Preparation for work and necessary tools
Although rearranging the shelf does not require complex equipment, proper preparation of the workplace will greatly facilitate the task. You will need free space in front of the open refrigerator to be able to temporarily place the removed glass panel. It is recommended to cover the floor or table with a soft towel or blanket to eliminate the risk of damage to the glass or floor covering in the event of a fall.
As for tools, in 90% of cases for refrigerators Pozis they are not needed, since all mechanisms are designed for manual operation. However, if we are talking about a model with tight-fitting guides or a unit that has not been serviced for a long time, a flat-head screwdriver with a wide blade may be required. It is used extremely carefully to pry out jammed plastic tabs.
- 🧤 Cotton gloves —necessary to protect hands from possible chips at the ends of the glass and for better adhesion to a smooth surface.
- 🧼 Glass cleaning agent —while the shelf is removed, it must be washed, since access to it is open from all sides.
- 📏 Ruler or tape measure - useful for accurately measuring the height of the products that you plan to store in order to choose the optimal level.
It is also important to free the shelf itself and adjacent levels from products. Crowded compartment will not give you the maneuver to safely remove the glass. Prepare containers or bags in advance to temporarily place the removed food, for example in a cooler bag, if rearranging will take time.
☑️ Preparing for rearranging
Step-by-step instructions: how to remove a glass shelf
The dismantling process begins with a visual inspection of the fasteners. In refrigerators Pozis the glass is usually not glued, but lies in grooves or on stops. Grasp the front of the shelf with both hands, placing your thumbs on top and your fingers on the bottom. Smoothly, without jerking, pull the shelf towards you. If the design involves the presence of limiters, you will feel resistance.
In models with guides (runners), the glass must first be lifted slightly in front to disengage its rear part, and only then pulled out completely. Lifting angle should not exceed 10-15 degrees, otherwise you may hit the top shelf or wall of the refrigerator. Movements should be smooth and coordinated.
If the shelf is divided into sections or has a plastic edge, make sure that you are removing the glass part and not trying to tear off the decorative element. In some modifications Pozis the glass is inserted into a plastic frame, and the entire structure must be removed. Frames, as a rule, have more pronounced handles for gripping.
⚠️ Attention: It is prohibited to use metal objects (knives, forks) to pry up glass. This is guaranteed to lead to the appearance of microcracks, which, under the influence of temperature changes, will quickly turn into through cracks.
After successful removal, immediately place the shelf on a prepared soft surface. Do not place the glass on its edge - it should only lie flat. Even tempered glass can break when installed at an angle due to the internal tension of the material.
What to do if the shelf cannot be removed?
If you feel that the shelf is stuck, do not use force. Check if food on adjacent shelves or walls of the refrigerator is in the way. Sometimes frozen condensation gets in the way - in this case, let the refrigerator stand for 10-15 minutes with the door open.
Adjusting the height and installing to a new level
After the shelf has been removed and washed, you can begin choosing a new position. The internal walls of the refrigerator compartment Pozis are equipped with rows of holes or protrusions for installing guides. Select a pair of holes at the desired height. It is important to ensure that the selected level is strictly horizontal, otherwise the products will roll off, and the glass plate may experience uneven load.
Installation of the guides (if they are removable) is done by simply pressing until a characteristic click is heard. If your model uses built-in stops, just make sure they are clean and not chipped. Plastic latches can become fragile over time, so press them firmly, but not fanatically.
Now take a clean glass shelf. Place its rear edge into the far stops or grooves, and then carefully lower the front part. The glass should snap into place with a light, barely audible click. Check the stability of the structure by lightly pressing your hand on the center of the shelf. It should not wobble or sag by more than 2-3 millimeters.
| Pozis shelf type | Mode of fastening | Maximum load | Removal features |
|---|---|---|---|
| Standard glass | On stops in the walls | up to 25 kg | Pull towards you, then up |
| With a plastic frame | In guide grooves | up to 30 kg | Remove with frame |
| Bottle shelf | Special clamps | up to 10 kg | Requires precise fit into the grooves |
| Freshness zone (zero) | Combined | up to 15 kg | First remove the box, then glass |
After installation, check that the shelf does not block air access to the evaporator or ventilation holes if they are located at the rear of the chamber. Violation air circulation can lead to improper operation of the refrigerator and the formation of ice.
Nuances for different models: Rowan and classic
Model range Pozis varied, and owners of popular series may be faced with different design solutions. For example, series refrigerators Rowan often use an “antibacterial coating” system and a specific shelf profile. It is important here not to confuse the top and bottom during installation if the glass profile is asymmetrical.
In classic two-chamber models with a lower freezer, the upper part is usually standard, but the lower shelf of the refrigerator compartment (above the freezer) may have fastenings. It often serves as a lid for the freezer compartment and can be thicker or have additional stiffeners. Removing the bottom shelf sometimes requires preliminary removal of the freezer drawers.
Particular attention should be paid to models with the system No Frost. The shelves in them may have perforations for better circulation of cold air. When installing such a shelf, it is important to ensure that the holes are not blocked by large-sized products, otherwise the temperature in this area will be higher than normal.
⚠️ Attention: The design of internal elements may vary depending on the year of manufacture. If the described steps do not apply to your refrigerator, check the manufacturer's official instructions for your specific model.
There are also models with a “crying” evaporator on the back wall. When rearranging shelves in such refrigerators, try not to move the back panel itself with condensate drainage channels, so as not to disrupt the moisture removal system.
Care of shelves and prevention of damage
Regular care of the internal elements of the refrigerator extends their service life. Glass, even tempered glass, can become cloudy or become covered with microscopic scratches over time. To clean the shelves Pozis use warm water and mild detergents. Aggressive chemistryabrasive powders and hard sponges are strictly prohibited, as they destroy the protective layer and structure of the glass.
One One of the main enemies of glass shelves is sudden temperature changes. Never place a hot pan on a cold shelf or wash glass that has just been removed from the freezer with hot water. This causes a thermal shock, which leads to instantaneous destruction of the material. Allow the shelf to warm up to room temperature before washing.
- 🌡️ Temperature range —avoid storing products on shelves whose temperature is significantly higher than the temperature in the chamber.
- 🧽 Soft rags —use only microfiber or sponges with a soft side to wipe surfaces.
- 🚫 No abrasives - soda, salt and cleaning powders will leave permanent scratches.
Periodically check the condition of the plastic stops and guides. If you notice that the plastic has begun to crumble or crack, it is better to replace these elements or contact a service center. Operating a shelf on damaged supports is fraught with the risk of it falling and breaking.
Possible problems and ways to solve them
During operation, situations may arise when the shelf begins to wobble or make extraneous sounds (vibration). Most often this is due to the fact that the shelf legs do not fit tightly into the grooves or the rubber seals are worn out (if they are provided for in the design). Try removing the shelf and installing it again, making sure it fits tightly.
If a crack appears on the glass, such a shelf cannot be used. Even a small crack will grow under load and vibration of the compressor. Safety comes first - glass fragments in food products are unacceptable. In this case, you need to order a new original spare part from the manufacturer.
It happens that the shelf simply slides along the guides. In this case, you can use special anti-slip mats or pads sold in hardware stores. They will also make subsequent cleaning easier, since the spilled liquid will not spread throughout the refrigerator, but will remain on the mat.
If you are faced with the fact that the new shelf (spare) does not fit into place, check its dimensions. Shelves from different models Pozis may have a similar design, but differ in width or depth by several millimeters, which makes them incompatible.
Where to buy a replacement?
Original shelves and plastic elements can be ordered at authorized Pozis service centers or through official dealers. Please indicate the exact serial number of the refrigerator when ordering.
Can the shelf be washed in a dishwasher?
Refrigerator manufacturers Pozis do not recommend washing glass shelves in dishwashers. Aggressive cleaning tablets and high water temperatures can damage the glass end grinding and plastic fasteners if they are removable. It is better to use hand washing with warm water.
What is the maximum load that the shelf can withstand?
A standard glass shelf in refrigerators Pozis is designed for a uniform load of up to 25-30 kg. However, it is important to distribute the weight evenly over the entire surface. A point load (for example, a heavy can standing in the middle between the stiffeners) can be more dangerous than distributed weight.
What to do if a shelf breaks?
It is necessary to carefully remove all the fragments using a vacuum cleaner (with caution) and adhesive tape. Then you need to measure the internal dimensions of the camera and contact the service center Pozis to order original spare parts. The use of glass from other models or homemade substitutes is not recommended due to the risk of destruction.
Why is the shelf frozen to the wall?
This may occur due to high humidity in the chamber or a malfunction of the condensate drainage system. If the shelf is frozen, do not force it off. Turn off the refrigerator, let the ice melt naturally, or use a hairdryer in cold air mode (not hot!), directing the flow to the place where it freezes.