Re-hanging the refrigerator door Ariston is a task that frightens many users. It seems that you cannot do without calling a specialist: after all, we are talking about a heavy part, fasteners and the risk of damaging the seal. In fact, the procedure takes no more than 40 minutesif you strictly follow the algorithm and take into account the nuances of a particular model. This article contains an analysis of common mistakes and tips on how to avoid door distortions after installation. step-by-step guide with video, analysis of common mistakes and tips on how to avoid door distortions after installation.
The main rule: do not rush. Even if it seems to you that “everything is simple,” haste will lead to loose seal seal or creaking hinges. We will analyze the process using the example of popular models Ariston (series Hotpoint-Ariston, Indesit Company), but the principles are also relevant for other brands with a similar design. And if you doubt your abilities, at the end of the article there is checklist for self-test before starting work.
Rehanging the door refrigerator Ariston is a task that frightens many users. It seems that you cannot do without calling a specialist: after all, we are talking about a heavy part, fasteners and the risk of damaging the seal. In fact, the procedure takes no more than 40 minutesif you strictly follow the algorithm and take into account the nuances of a specific model. This article contains an analysis of common mistakes and tips on how to avoid door distortions after installation. step-by-step guide with video, analysis of common mistakes and tips on how to avoid door distortions after installation.
The main rule: do not rush. Even if it seems to you that “everything is simple,” haste will lead to loose seal seal or creaking hinges. We will analyze the process using the example of popular models Ariston (series Hotpoint-Ariston, Indesit Company), but the principles are also relevant for other brands with a similar design. And if you doubt your abilities, at the end of the article there is checklist for self-test before starting work.
When you need to rehang the door Ariston refrigerator?
Overweight is not always a whim. There are objective reasonswhy it is worth changing the opening side:
- 🔄 Kitchen remodeling. If the refrigerator is now in a corner or next to furniture, standard opening may be inconvenient.
- 👨👩👧👦 Left-handers in the family. For left-handers, it is more convenient when the door opens from left to right.
- 🚪 Problems with hinges. If the hinges are worn on one side, re-hanging them will extend their service life.
- 🔧 Repairing the seal. Sometimes it is easier to rehang the door than to change the rubber on the worn side.
But before you take up the tools, check does your model support the rehang. Some budget refrigerators Ariston (for example, series BCD or BLF) there are no holes for fastenings with on the opposite side. In this case, you will have to buy additional components or put up with the inconvenience.
⚠️ Attention! On models with water dispenser (for example, Ariston HBM 13224), reversing the door may require moving water supply tubes. Without experience, this is fraught with leaks. Contact a specialist.
Preparation: tools and safety
For work you will need:
- 🔧 Phillips and flathead screwdrivers (preferably magnetic so as not to lose the screws).
- 🔨 Socket wrench (usually 10 or 13 mm - depends on the model).
- 📏 Level (to check the horizontal position after installation).
- 🧲 Magnet or bowl for collecting small parts.
- 🧴 Silicone grease for hinges (optional, but recommended).
Important: before starting work unplug the refrigerator i take out all the products. The door weighs 10–15 kg, so it is better to work with an assistant. If there is no assistant, place it under the door soft cloth or cardboardto avoid scratching the floor when removing.
Step-by-step instructions: how to remove the door of an Ariston refrigerator
The process of removing the door is the same for most models Ariston (for example, Hotpoint-Ariston HBM 1182, Ariston MBA 2201Follow the algorithm:
- Remove the decorative plugs from the hinges. latches - pry them off with a flat screwdriver.
- Unscrew the top hinge. Usually it is fixed. 2-3 boltsHold the door so that it does not fall!
- Carefully remove the door from the bottom hinge. Lift it up and pull it towards you.
- Disconnect the bottom hinge from the refrigerator body.
If the door two-chamber refrigeratoris removed first upper part (freezer compartment), then the bottom one. data-i="148">from the control unit. electronic display (For example, Ariston HBM 24224) before removing the door disconnect the cable cable from the control unit.
Take a photo of the location hinges and plugs|
Disconnect the refrigerator from the mains|
Free the shelf for the door (minimum 1 m²)|
Prepare tools and a magnet for screws-->
Transfer hinges and fasteners to another side
Now you need rearrange the hinges and plugs to the opposite side. There are nuances here:
- 🔧 The upper hinge usually universal - you can simply turn it over. But on some models (for example, Ariston BCD 124) will be required to reconfigure the latch.
- 🔄 The lower one. loop often has asymmetrical designCheck whether there are holes for fastening on the other side.
- 🕳️ Plugs replaced on the vacated holes. If there are no holes, they can be closed decorative stickers (come with the refrigerator).
On models with automatic closing. doors (system Soft Close), when rehanging, it may be necessary to damper reconfiguration. This is usually done by turning the adjusting screw on the hinge.
| Ariston model | Hinge type | Is adjustment necessary after rehanging? |
|---|---|---|
| HBM 1182 | Standard | No |
| MBA 2201 | S Soft Close |
Yes (screw on the bottom hinge) |
| BCD 124 | Asymmetric | Yes (replacement required bushings) |
| HBM 24224 | With display | Yes (loop transfer) |
⚠️ Attention! On refrigerators with No Frost system after rehanging the door, it may be required reinstalling the air duct. If this is not done correctly, the freezer will freeze.
Installing the door on a new side: video and tips
When the hinges have been transferred, you can begin reassembling. Procedure:
- Put the door on lower hinge and slightly lift it.
- Align the level and fix top hinge.
- Tighten the bolts, but not all the way first check how the door opens.
- Adjust the position of the door if it is the body sags or catches.
Critical point: after installing the door, check the gap between the seal and the body. It should be the same around the entire perimeter (no more than 2 mm). If the gap is larger, the seal will quickly lose elasticity, and the refrigerator will begin to “cry.”
Watch the video instructions for a visual understanding of the process:
Video instructions for rehanging the Ariston door
Example for the Ariston HBM 1182 model. For other series, the process may be slightly differ.
If after installation the door is creaks, lubricate the hinges with silicone grease (do not use WD-40 - it corrodes the plastic!). If the door opens spontaneouslycheck:
- Horizontal position of the refrigerator (adjust the legs).
- The tightness of the seal (if necessary, warm it up with a hair dryer).
- Tightening the bolts on the hinges.
Typical mistakes and how to avoid them
Even experienced craftsmen sometimes make mistakes when hanging doors Ariston. Here are the most common:
- 🔧 Insufficient tightening of the bolts → the door sags after a week.
- 🔄 Hinges are skewed → the seal does not fit, the refrigerator does not freeze.
- 🕳️ Loss of plugs → open holes spoil the appearance.
- ⚡ Damage to the display cable → the screen does not work.
To avoid problems:
- Use torque wrench to tighten the bolts (tightening torque - 1.5–2 Nm).
- Check the horizontal position level, and not "by eye".
- If you remove the display, mark the connectors marker.
⚠️ Attention! On models with inverter compressor (for example, Ariston HBM 24224 IX) after re-hanging the door, it may go wrong. calibration of temperature sensorsIf the refrigerator freezes worse, reset the settings (press the button Super Cool for 10 seconds).
What to do if after rehanging the refrigerator does not freeze?
If after installing the door the refrigerator poor cooling or works constantly, the reasons may be the following:
| Problem | Cause | Solution |
|---|---|---|
| The refrigerator does not turns off | The seal is damaged | Warm with a hairdryer or replace |
| The freezer freezes | The air duct is pinched No Frost |
Check and correct handset |
| Display blinks/does not work | Damaged cable | Reconnect or replace |
| Creak when opening | Loops not lubricated | Apply silicone grease |
If the problem persists, return the door to its original position and check:
- Integrity magnetic tape seal.
- Position door closing sensor (on some models it is built into the hinge).
- Operation No Frost fan (must turn on when the door is closed).
FAQ: Frequently asked questions about hanging the Ariston door
Is it possible to hang the door of an Ariston refrigerator yourself if you don’t have experience?
Yes, but it’s better to work with an assistant - the door is heavy and easy to drop If the model has a display or system No Frost, watch the instructional video for your episode first.
How much does it cost to rehang a door in a service center?
The cost of work in official services Ariston —from 1500 to 3000 rubles, depending on the model If replacement of hinges is required or. seal, the price will increase to 4000–5000 rubles.
What to do if there are no holes for hinges on the new side?
In this case you need buy set of hinges for hanging (the article is indicated in the instructions for the refrigerator). For example, for Ariston HBM 1182 is a set of C00348966.
How often do you need to lubricate the hinges after hanging?
Enough once every 6 months. Use only silicone grease other types can damage the plastic.
Is it possible to rehang the door on a refrigerator with an ice maker?
Technically yes, but you will also need relocating water supply pipes setting up the ice sensor. Without experience, it is better to contact the service.