We rehang the LG refrigerator door ourselves: from preparation to final adjustment

Re-hanging the refrigerator door LG is a task that owners face when moving, changing the kitchen layout, or simply wanting to optimize space. Unlike many brands, the equipment of the Korean manufacturer allows doors to be rehung most models (except for narrow and built-in ones), but the process requires accuracy and knowledge of the nuances. For example, refrigerators with a NoFrost system have additional fasteners for sealing, and models with water dispenser elongated hoses that need to be laid correctly.

Many are afraid of damaging seal or disrupt the door's balance, but if you follow the instructions, the risks are minimal. The main thing is not to skip the step of adjusting the hinges after rehanging, otherwise the door will open spontaneously or fit poorly. In this article, we will analyze the process from A to Z: from preparing tools to testing tightness, taking into account the features of popular series LG (for example, GA-B489, GR-B429, GB-B459).

⚠️ Important: If your refrigerator is under warranty, re-hanging the door yourself can void it. Check the conditions at the service center LG before starting work.

1. Preparation: tools and conditions

Before removing the door, make sure you have everything you need. Most of the tools can be found in your home arsenal, but some parts (for example, plugs for hinge holes) may require purchase.

• 🔧 A Phillips screwdriver (PH2 or PH3 - depends on the model). Some refrigerators LG use hex head screws, so you may need a 5 or 6 mm wrench.
• 📏 Level (bubble or laser) to check the level of the door after installation.
• 🧲 Magnetic holders or tape - to secure the door during work and avoid falling.
• 🔌 Plastic plugs for closing unused holes for hinges (usually included with the refrigerator).
• 🧴 Silicone grease (optional) for processing the seal after rehanging.

Also prepare the workspace:

• 🚪 Clear the passage to the refrigerator - the door will have to be removed completely, and it will take place.
• 🧊 Unplug the refrigerator and defrost (if the model is not NoFrost). This will prevent condensation from forming on the seal.
• 📦 Remove all food and shelves from the door - they may fall out during dismantling.

2. Door fastening scheme LG: what you need to know

The design of the hinges LG is different from other brands. Most models use the system "top + bottom loop", but there are nuances:

• 🔄 In refrigerators with dispenser (for example, LRMVC2306S) the bottom loop is connected to the water supply hose. It cannot simply be turned over - the hose will need to be re-laid.
• 🔒 Models with electronic display (series InstaView) have additional wires in the top loop. They cannot be pulled or twisted!
• ❄️ In refrigerators NoFrost the upper hinge is often attached to the body through a metal plate - it must be removed carefully so as not to bend it.

Typical fastening scheme:

⚠️ Attention: B In refrigerators LG manufactured before 2018, the lower hinge is sometimes fixed not with screws, but with latches. If during dismantling it does not give in, do not use force, but check for hidden fasteners.

3. old door

Start with the top hinge - this will simplify further dismantling. Follow the algorithm:

1. Open the refrigerator door 90°. Place a book or a wooden block under it for stability.

2. Remove the decorative cover of the top hinge (it is usually snaps or is secured with one screw).

3. Unscrew the screws that secure the upper hinge to the refrigerator body. In models with a display, carefully disconnect the power connector (it can be secured with a plastic clip).

4. Hold the door, remove it from the lower hinge, pulling up. If the door is “jammed,” check if it is in the way. seal or magnetic tape.

Now remove the lower loop:

• 🔧 Unscrew the screws securing the loop to the body.
• 🚰 In models with a dispenser, carefully pull the hose out of the groove and move it to the other side (not bend!).
• 🔄 If the hinge has adjusting bolts (to align the door), remember their position or take a photo.

Unplugged|Door open 90°|Shelves and products removed|Tools at hand|Photo of the original position of the hinges-->

4. Transferring the hinges to the other side

This stage requires precision, since the location of the hinges determines whether the door will close tightly. Follow the steps:

1. Transfer top hinge to the opposite side LG The holes for the hinges are already there - they are covered with plastic plugs. Remove the plugs and install the hinge in a mirror manner.

2. For lower hinge repeat the process, but keep in mind:

   • 📏 The distance from the edge of the body to the hinge should coincide with the original (usually 2-3 cm).
   • 🔧 Do not tighten the screws all the way - you will do the final tightening after hanging the door.

In models with dispenser transfer the water supply hose to the other side, securing it with plastic ties (included in the kit).

⚠️ Attention: If your model LG is used magnetic seal with a metal insert (for example, in series DoorCooling+), it cannot be turned over. If installed incorrectly, the door will not be sealed!

What to do if there are no holes for the hinges?

In rare cases (usually in old or atypical models), holes for hinges may be missing on the opposite side. In this case:

1. Use a template (can be made using an old hinge on cardboard).

2. Drill holes with a drill with a metal drill (∅ 4–5). mm).

3. Close the old holes with plugs or silicone sealant.

5. Door installation and adjustment

Now hang the door on the new hinges. This step is the most important - mistakes here will lead to misalignment or poor sealing. data-i="151">Place the door onto

1. Put the door on the bottom hingethen carefully align it with the top one. Make sure that the hinge pin fits into the groove.

2. Tighten the screws of the top hinge, but not completely. The door should hang freely. distortions.

3. Adjust the door position:

   • 📐 Check verticality level. If the door falls forward or backward, tighten the adjusting bolts on the hinges.
   • 🧲 Check seal fit. It should be pressed evenly around the entire perimeter. If there are gaps, loosen the hinges and adjust the position.

Tighten all screws until they stop. Make sure that the door opens smoothly and does not close spontaneously (this is a sign of misalignment).

Critical! In refrigerators LG with a system DoorCooling+ (for example, GR-B429) after rehanging the door, you need to reset the fan settings. To do this:

1. Unplug the refrigerator for 1 minute.
2. Turn on and hold the button Super Cool 5 seconds until you hear a signal.

6. Checking the tightness and finishing touches

After installing the door, you need to make sure that the refrigerator is working correctly. Carry out tests:

• 📉 Leak test: Close the door and place a strip of paper along the seal. If it falls out or is easily pulled out, the seal does not fit tightly. Adjust the hinges.
• ❄️ Cooling test: Plug in the refrigerator and wait for the first cooling cycle (1-2 hours). Check for ice on the back wall (for models without NoFrost) or excessive frosting of the seal.
• 💧 Test dispenser (if any): Pour water - if the flow is weak or intermittent, check the hose laying.

If everything is in order:

• 🔌 Replace the decorative plugs on the hinges.
• 🧼 Wipe the seal and refrigerator body with a damp cloth.
• 📋 Write down the date re-hanging in the warranty card (if it is still valid).

7. Common mistakes and how to avoid them

Even if you follow the instructions, you can make mistakes that will lead to breakdown. Here are the most common ones:

Error	Consequences	How to fix
Overtightened hinge screws	Door deformation, difficult opening	Loosen the screws, adjust the position
Improper installation of the dispenser hose	Water leaks, low pressure	Reposition the hose without kinks, secure with ties
Ignore adjusting the hinges	Spontaneous opening of the door	Align the door, tighten the bolts
Damage to the seal	Violation of tightness, ice	Replace the seal or restore the shape with a hairdryer (heat up to 60°C)

⚠️ Attention: If, after rehanging, the refrigerator begins to vibrate strongly or make a grinding noise, immediately unplug it! This may indicate that the compressor or refrigerant pipes are misaligned. In this case, professional repair is required.

FAQ: Answers to frequently asked questions

Is it possible to hang the door on the refrigerator LG with a dispenser yourself?

Yes, but the process is more complicated due to the water supply hose. The main thing is to carefully move the hose to the other side without bending it. In models LRMVC2306S and similar ones, the hose is attached to the bottom hinge with a plastic clamp - it needs to be moved in a mirror manner.

How long does it take to hang the door?

On average 1–1.5 hours for an experienced user. If this is your first time, allow 2-3 hours to allow for adjustments and testing. On models with an electronic display (for example InstaView), additional time may be required to work with the wires.

Do you need to defrost the refrigerator before rehanging?

It is mandatory if you have a model with a drip defrosting system. In refrigerators NoFrost defrosting is not required, but it is recommended to turn off the power for 30 minutes before starting work.

What to do if, after rehanging, the door does not close tightly?
The reasons may be different:
• Incorrect adjustment of the hinges - loosen the screws and level the door.
• The seal is damaged - check it for gaps or dirt.
• The refrigerator body is skewed - level the legs.

If the problem persists, the hinges may be worn out and require replacement.

Is it possible to re-hang the door on a refrigerator LG with the DoorCooling+ system?

Yes, but after re-hanging it is necessary to reset the fan settings (see instructions above). In these models, the door is heavier due to additional air ducts, so adjusting the hinges must be especially careful.