Rearranging kitchen furniture or changing the layout often raises the question of changing the direction of door opening for owners of household appliances. Refrigerators Samsung were originally designed taking into account the possibility of such modification, which allows you to adapt the device to new conditions without loss of functionality. However, the process requires attentiveness, the availability of specific tools and a clear understanding of the design of a particular model.
In this article we will analyze in detail how to hang the door on a Samsung refrigerator, relying on technical manuals and the experience of service engineers. We will look at the differences in hinge designs for systems No Frost and drop type, and also pay attention to the nuances of transferring the magnetic latch. The video materials mentioned in the text will help to visualize the complex stages of work.
Independent implementation of the procedure requires compliance with safety precautions and sequence of actions. Incorrect assembly can lead to misalignment of the sash, loss of tightness, or failure of the cooling system. Therefore before starting work, be sure to disconnect the device from the power supply let the compressor cool for 15-20 minutes.
Preparation of the workplace and the necessary tools
The quality of the work performed directly depends on the preparation. You will need a stable surface on which to place the removed door without damaging its finish or decorative elements. Clear the space around the refrigerator in advance to have free access from all sides.
For dismantling and subsequent installation of hinges you will need the following set of tools:
- 🔧 Hex keys (usually sizes 4 mm, 5 mm or specific for Samsung).
- 🪛 Flat-head or Phillips screwdriver (depending on the type of screws).
- 🔨 A small hammer or rubber mallet for carefully knocking out the pins.
- 🧤 Work gloves to protect your hands from sharp metal edges.
Pay special attention to the condition of the fasteners If you find rust. or broken threads, it is better to purchase new bolts of the appropriate strength class in advance. Using damaged fasteners can lead to sagging of a heavy door and damage to the body.
⚠️ Attention: Do not use impact screwdrivers or impact wrenches to tighten the hinges. Excessive torque can break the threads in the aluminum case or deform the fittings. holes.
Design analysis: features of the No Frost and Static models
Before starting disassembly, you need to understand what kind of cooling system you are dealing with. models No Frost the door is often connected to an air duct system, and in the lower part there may be an automatic closing mechanism or an opening sensor. In classic models with static cooling, the design is simpler, but requires care when working with the lower canopy.
The key difference is the presence of additional wires and cables If your refrigerator is equipped with a display on the door or a system. data-i="65">, electrical connections can pass through the upper hinge. They must be disconnected first so as not to damage the connectors when removing the sash. Twin Cooling, electrical connections can pass through the top loop. They must be disconnected first so as not to damage the connectors when removing the sash.
It is also worth paying attention to the type of lower support. Samsung the lower hinge has an adjusting screw that allows you to compensate for unevenness of the floor. which requires careful study of the diagram in the instructions.
What are the differences between the hinges for different sides?
The design of the upper and lower hinges is often asymmetrical. The holes for fasteners on the refrigerator body are mirrored, so simply moving the hinge to the other side without replacing the part itself or using special adapters (included in the kit) will not work.
Dismantling the top hinge and removing the door
The process begins from the top of the device. Remove the decorative plug from the top hinge, if any. Samsung to do this, you need to slightly pry it with a flat screwdriver. Under the plug there are mounting bolts that need to be unscrewed. data-i="73">After loosening the bolts, carefully lift the hinge. If the model is equipped with electronics, now is the time to disconnect the wire connectors. Remember or take a photo of the connection order so as not to mix up the contacts during assembly. Then ask an assistant to hold the door while you completely remove the upper hinge axis.
After loosening the bolts, carefully lift the hinge. If the model is equipped with electronics, now is the time to disconnect the wire connectors. Remember or take a photo of the connection order so that you don’t mix up the contacts during assembly. Then have a helper hold the door while you completely remove the top hinge pin.
Remove the door by lifting it up. It is quite heavy. therefore, proceed carefully. Place the removed door on the prepared soft surface with the outer side down, placing something soft under the corners.
☑️ Dismantling steps
Now you can move to the lower part. Clean the free space from dust and dirt that may have accumulated there over the years of operation.
Transferring fittings and adjustment elements
At this stage, the main mechanical work of transferring the fastening elements takes place. You need to move the stoppers, stops and hinges themselves to opposite sides. To do this, unscrew the fastening bolts from the old holes and screw them into mirror ones. holes on the same door.
Pay attention to the magnetic latch (door lock). It is usually located on the opposite side of the hinges. To remove it, sometimes you need to carefully pry off the plastic body of the latch. After removal, it is installed in the prepared hole on the other side.
If your model has plastic plugs for the holes (which will now become visible from the outside). working side), install them. This will give the refrigerator an aesthetic appearance and protect the insides from dust.
| Element | Action | Nuance |
|---|---|---|
| Upper hinge | Repositioning to a new one axis | Check the alignment of the holes |
| Lower support | Transfer to the lower hole | Do not lose the adjusting screw |
| Magnetic latch | Removal and rearrangement | Act without strong pressure |
| Plugs | Installation in old holes | Select by color and size |
It is not important mix up long and short screws. Using a bolt that is too long can cause it to rest on the inside wall of the refrigerator or damage the insulation.
Installing the door on the new side
After preparing all the elements, you can begin installation. Install the lower support washer or hinge in the new hole on the refrigerator body. Put it on. door onto the lower axle, making sure that it fits tightly and evenly.
Now install the upper hinge. Insert the axle into the door hole and align the hinge mounting holes with the holes on the refrigerator body. Screw in the bolts, but do not tighten them until they stop.
If the model is equipped with wires. carefully place them in the designated channels and connect the connectors until they click. Make sure that the wires are not pinched or twisted, otherwise they may be damaged when opening the door.
⚠️ Attention: When installing the top hinge, make sure that it lies flat without distortions. Trying to forcefully tighten the skewed hinge with bolts can lead to bending of the metal and the inability to close tightly. doors.
Adjusting gaps and checking tightness
The final stage is adjusting the position of the door. Tighten the fastening bolts of the upper hinge. Check how the door closes: it should fit tightly around the entire perimeter, without gaps. The gap between the door and the body should be uniform.
To adjust the height, use the lower adjustment screw. By twisting it, you can raise or lower the corner of the door. If the door closes by itself or, conversely, does not close completely, the tilt of the entire refrigerator needs to be corrected using the front adjustable supports.
Check the operation of the magnetic seal. Pass a sheet of paper between the door and the body when closed: the paper should be removed with noticeable force along the entire perimeter. If in some place the paper slides freely, it means that the seal there is broken.
After all the manipulations, turn on the refrigerator. Let it work for several hours without loading food to make sure the temperature is stable and there are no extraneous noises that could appear due to misalignment.
Frequently asked questions (FAQ)
Is it possible to reverse the door on a two-door Samsung refrigerator?
Yes, on most two-door refrigerators models Samsung (Top Mount or Side-by-Side) provide the possibility of rehanging. However, for Side-by-Side models, the process is more complicated and may require removing both doors at the same time. Some budget models may not have the ability to rehang - check the instructions.
What to do if the plugs for the holes are lost?
Plugs can be ordered from an authorized service center Samsung according to the model code. The holes can be temporarily covered with decorative stickers or simply left if they do not spoil the appearance or collect dirt.
Do you need to defrost the refrigerator before rehanging it?
Complete defrosting is not necessary if you work quickly. However, if there is a lot of ice in the freezer, it is better to defrost the unit in advance so that water does not flow when tilting or removing the doors, damaging the floor or wiring.
Why did the door begin to close worse after rehanging?
Most likely, the angle of the refrigerator is broken. Make sure the front legs are twisted out so that the body is slightly tilted back. Also check whether anything inside (shelves, products) prevents the door from closing tightly.
Is the warranty guaranteed after re-hanging it yourself?
According to the law, independent repairs or modifications (which include re-hanging doors) may become grounds for denial of warranty service if the breakdown is related to your actions. If you are not confident in your abilities, it is better to call a specialist.