Rearranging kitchen furniture often requires changing the configuration of household appliances. If you plan to change the opening direction of the doors, you will need precise instructions explaining how to change the doors of your LG display refrigerator. Models of the Korean brand are often equipped with electronics on the facade, which complicates the process compared to mechanical counterparts.
The main difficulty is the need to carefully disconnect the control cables. Electronic display requires careful handling, since damage to the contacts can damage the control panel. In this article, we will analyze in detail the stages of dismantling and installation so that you can complete the work without involving a specialist.
Before starting work, make sure that you have free space around the unit. You will need access from all sides, including the back wall, where cables are often located. LG refrigerators they are distinguished by a reliable assembly, so removing elements will require physical effort, but this must be done carefully.
Necessary tools and workplace preparation
High-quality preparation of the workplace is the key to successful completion of the operation. You will need a flat surface on which to temporarily place the removed parts to avoid damaging them. Collect all the tools in advance so as not to be distracted during the work.
To perform dismantling and subsequent installation you will need:
- 🔧 A set of screwdrivers (phillips and flat) for unscrewing screws of various sizes.
- 🔩 8 mm wrench or socket (most often used in LG models).
- 🧤 Work gloves to protect hands from sharp metal edges.
- 🧹 Soft rags for wiping surfaces and protecting the floor.
Be sure to turn off refrigerator from the mains before starting any manipulations. This is a critical safety precaution since you will be working with electrical components. It is also recommended to empty the door shelves to reduce their weight and prevent the contents from falling out.
⚠️ Attention: Some models LG Door-in-Door have a complex fastening system. Do not use excessive force if the mechanism does not give in - you may have missed a hidden screw or latch.
Design features of LG refrigerators with a display
Understanding the internal structure helps to avoid mistakes during disassembly. Unlike simple models, here the top hinge is often integrated with the control unit. That is why the question of how to hang the doors of an LG refrigerator with a display requires special attention to the upper part of the case.
Electronic components can be located directly at the end of the door or in the upper jumper. The cables run inside the hinge joints, which requires their careful disconnection before completely removing the sash. Cable cables usually have special latches that cannot be broken.
It is important to consider the weight of the structure. A door with a display and system No Frost can weigh significantly more than a standard one. It is better to do the work with an assistant to prevent distortions and heavy elements falling onto the floor.
Where are the main fasteners?
The main screws are most often hidden under decorative plugs. On LG models they can be located at the top of the end or under the plastic trim above the door. Carefully inspect the surface for holes or removable elements.
Removing the upper hinge and control panel
The process begins from the top of the unit, since this is where the main fastening units and electronics are concentrated. First, remove the decorative cover covering the top hinge. It can be held on by latches or screws that need to be unscrewed.
Next you need to disconnect the connectors of the wires going to the display. They are usually color-coded or labeled, but before disconnecting it is better to take a photo of the original position. Connectors can be tight, they should be pulled out carefully, holding the plastic case, not the wires.
After disconnecting the electronics, unscrew the bolts holding the top hinge. Now you can remove the loop itself. If your model has a control panel built into the door, this step requires special care to avoid damaging LCD screen.
☑️ Preparing to remove the door
Removing the door leaf and rearranging the fittings
When the top hinge is removed, the door is supported only by the bottom hinge. Gently lift the sash to remove it from the bottom shaft. Place the door on the prepared soft surface with the outer side down.
Now you need to move the fittings to the opposite side. Remove the handle if it is asymmetrical and move the opening stops. At the ends of the door you will see holes closed with plastic plugs. They need to be removed and moved to the vacant places to close the old holes.
For models with a display, it is important to lay the cable channel correctly. Make sure the wire is not kinked and is of sufficient length for the new position. Closer mechanism (if any) may also require reinstallation or adjustment.
| Element | Action | Tool | Nuance |
|---|---|---|---|
| Upper hinge | Dismantling and transfer | 8 mm key | Keep an eye on cable |
| Plugs | Rearrangement at the end | Knife or screwdriver | Do not lose small parts |
| Bottom loop | Move the axis of rotation | Phillips screwdriver | Check the level |
| Door stop | Replacing the side | Screwdriver | Lubricate the hinge |
⚠️ Attention: When moving the lower pin, make sure that it sits tightly in the new socket. Incomplete seating can lead to the door being skewed and the seal being sealed.
Installing the door on a new side and connecting
After preparing the door leaf and transferring all the fittings, we proceed to installation. Hang the door on the bottom hinge, having previously installed it in a new position on the refrigerator body. Align the sash so that it is level.
Now you need to connect the display cables. Insert the connectors until you hear a characteristic click. Make sure that the wires are not pinched by the metal parts of the loop, otherwise they may fray when opening. Wire insulation Must be intact.
Put the top hinge in place and tighten the mounting bolts. Do not tighten them completely at once - first tighten all the screws, level the door, and only then finally secure the fasteners. This will avoid distortions.
Check the operation of the display by turning on the refrigerator. If the screen lights up and responds to touches, it means the connection is correct. Make sure that the door closes tightly and the magnetic seal fits along the entire perimeter.
Adjustment and checking the tightness
Correct installation is not only about working electronics, but also about the tightness of the camera. After installation, check how the door closes. It should fit evenly, without gaps. If you notice a loose seal at the bottom, the height may need to be adjusted.
You can use a simple sheet of paper test to check the seal. Clamp the sheet with the door in different places around the perimeter. If the paper is pulled out with force, then the compactor is working correctly. If the sheet falls out freely, you need adjustment of the loops.
Also pay attention to the operation of the system No Frost after rehanging. Make sure that the air ducts are not pinched and that cool air is circulating freely. Incorrect installation can lead to the formation of ice.
⚠️ Attention: If, after hanging the door, the refrigerator begins to work louder or vibrations appear, check the stability of the legs. The center of gravity may have changed and the supports need to be tightened.
Frequently asked questions (FAQ)
Do you need to defrost the refrigerator before rehanging?
Full defrosting is not necessary if you work quickly. However, if there is a lot of ice in the freezer, it is better to wait until it melts so that water does not get on the electrical contacts when the door is tilted.
What to do if the display wires are too short?
In the standard configuration, the length of the wires is designed for both sides. If you do not have enough length, check whether you have laid the cable correctly in the channel. It is not recommended to stretch or extend the wires yourself - this may disrupt the operation of the electronics.
Can the display be damaged when removed?
Yes, this is possible if handled carelessly. The display is fragile, especially the corners. When removing the top hinge, hold the door firmly and do not allow sudden jerks, which can create tension in the place where the screen is attached.
Is the warranty honored after re-hanging the doors yourself?
Re-hanging the doors yourself usually does not void the warranty unless you damage parts in the process. However, if you break the hinge or burn the control board, there will be a repair charge. Keep all removed screws and parts.
How often should the seal be changed?
The rubber seal lasts a long time, but if after rehanging the door does not fit well even after adjustment, the seal may be deformed. In this case, it is better to replace it with the original one.