Moving or purchasing new equipment is always associated with logistical difficulties, especially when it comes to large-sized devices. Transporting a refrigerator requires special attention, since the internal structure of the unit is sensitive to shaking, shock and incorrect tilt angle. Owners of household appliances Beko often wonder whether it is possible to place the device on its side or be sure to transport it vertically so as not to damage the expensive compressor.
Modern models of the Turkish brand are equipped with reliable, but demanding cooling systems. Violation of transportation rules can lead to oil leakage from the compressor into the refrigerant circulation circuit, which can lead to clogging of the capillary tube. Correct preparation moving allows you to avoid costly repairs and guarantees that the device will last the entire period declared by the manufacturer without failures.
In this article we We will analyze in detail the algorithm of actions that will ensure the safe delivery of your equipment to its destination. You will learn how to secure moving parts, why it is important to keep the original packaging and how long should to settle the Beko refrigerator after horizontal transportation before the first connection to the network.
⚠️ Attention: Technical characteristics and installation requirements may vary slightly depending on the specific series (for example, Beko NeoFrost or classic models). Always check the instructions that come with your device, as the design of the compressor may vary.
Preparing the refrigerator for moving
You should start long before the movers arrive. The first and most important stage is a full defrosting camera. Even if your model supports the No Frost system, there may be ice build-up inside or condensation in the drainage system, which, when tilted, will flow onto the electronic boards or into the casing.
Disconnect the device from the power supply and leave the doors open for at least 24 hours. This time is necessary for all moisture to evaporate and the unpleasant odor to disappear. At the same time, carry out a thorough washing the internal shelves and drawers, using mild detergents that do not contain abrasives.
- 🧊 Completely defrost the evaporator and remove any remaining water from the tray.
- 🧼 Wash all removable elements: glass shelves, plastic containers, bottle holders.
- 🔌 Disconnect the power cord and securely secure it on the back wall with tape.
- 📦 Collect all small accessories in a separate bag so as not to lose keys or fasteners.
After After the internal chambers have dried, it is necessary to dismantle all removable parts. Glass shelves may break when shaken, and plastic guides may break. If the original packaging has not been preserved, each fragile element should be wrapped in thick paper or bubble wrap and placed in a separate box.
☑️ Preparation checklist
Packaging and protecting the case
Preserving the presentation and integrity of the case is the second most important task. A factory-made cardboard box with foam inserts is the ideal protection option. If you have it, be sure to use it, since the foam Beko is designed taking into account the maximum load points of other zones of a particular model.
In the absence of the original container, the body must be wrapped with stretch film in several layers. This will protect the surface from scratches and chips. For additional shock absorption, you can use blankets, thick cardboard or special protective covers for moving.
Pay special attention to the doors. They should not open spontaneously while driving. Use masking tape or special belts to secure it. Glue the tape directly onto the glossy surface Do not use the doors - it can leave traces of glue or damage the coating when peeled off. First, stick a layer of paper, and then fix the structure.
Transportation: vertical position or lying down?
The most common dispute among owners concerns the position of the unit in the back of a truck. Manufacturers of household appliances, including Bekoinstructions most often recommend transporting refrigeration equipment strictly in vertical position. The angle of inclination should not exceed 40 degrees.
Why is this so important? Inside the compressor there is oil that lubricates the rubbing parts. If there is a strong tilt or horizontal position, oil may leak into the cooling circuit through the outlet pipe. If oil gets into the system, the compressor will work with overload, which will quickly lead to its failure.
However, in real life, especially when moving in a passenger car or in a Gazelle with a low ceiling, vertical transportation is often impossible. Practice shows that transportation lying is acceptable, but requires compliance with strict safety rules and subsequent long-term settling.
Rules for transportation in a horizontal position
If you decide to carry the refrigerator Beko lying down, it is critically important to choose the right side. It is strictly forbidden to place the unit on the door or on the rear wall where the radiator and compressor are located. In the first case, you can deform the seals and damage the handles; in the second, you can push through thin condenser tubes or damage the motor.
The optimal position is on the left or right side. Usually there is a marking or direction indicated on the side opposite the compressor tube exit. If there are no markings, use the tubes as a guide: you need to place them so that the tubes coming out of the compressor face up.
When transporting horizontally, be sure to place thick cardboard or a blanket under the bottom to avoid vibration and scratches. Secure the body with straps so that it does not ride on the floor of the body. Avoid sudden braking and hitting the sides.
⚠️ Attention: Never use the refrigerator itself as a support for other cargo. Do not place heavy boxes, bags or other equipment on top, even if it seems that the metal case will withstand it. Deformation of the roof may compromise the tightness.
Adaptation after moving
After delivering the device to the place of new deployment, you cannot immediately plug it into an outlet. This rule is especially relevant after horizontal transportation. The oil that gets into the circuit must have time to drain back into the compressor crankcase under the influence of gravity.
The settling time directly depends on how exactly you transported the equipment and what temperature was outside. If transportation was carried out vertically, observing the angle of inclination, 2-4 hours is enough. If the refrigerator was lying on its side, the time increases.
In winter, when equipment is brought from the cold into a warm room, another problem arises - condensation. Moisture settles on internal elements and electrical contacts. Turning on a wet device may cause a short circuit.
| Type of transportation | Time of year | Minimum settling time |
|---|---|---|
| Vertical (angle < 40°) | Summer | 2-4 hours |
| Vertical (angle < 40°) | Winter | 4-6 hours + warm-up time |
| Horizontal (on the side) | Summer | 8-12 hours |
| Horizontal (on the side) | Winter | 12-24 hours |
What will happen if you turn it on ahead of time?
If you start the compressor before the oil drains, it will run dry or with an oil plug. This will lead to water hammer, valve breakage or jamming of the piston group. Repairing a compressor is often not economically feasible.
First start-up and performance check
When the allotted time has been met, you can begin the first launch. Place the refrigerator on a flat surface, adjusting the level using the front feet. The rear wheels or supports should only lightly touch the floor or be raised so that the main weight is supported by the adjustable screws at the front.
Plug in the appliance without load (empty). Let it work for 1-2 hours. During this time, the compressor should reach the desired temperature and turn off. If the motor hums continuously for more than 2 hours and does not turn off, or makes strange knocking and clanging noises, this is a cause for concern.
Check the door tightness. A sheet of paper sandwiched between the seal and the body must be pulled out with force along the entire perimeter. If the paper falls out freely, it means that the seal was deformed during the move and requires replacement or restoration with a hot hairdryer.
Is it possible to transport a Beko refrigerator at temperatures below -10°C?
Transportation at extremely low temperatures is undesirable. Plastic parts become brittle and may crack due to vibration. In addition, the oil in the compressor thickens. If transportation cannot be avoided, after bringing it into a warm place, allow the device to warm up to room temperature (at least 4-6 hours) before turning it on.
What to do if the refrigerator does not freeze after transportation?
If after 24 hours of operation the temperature does not decrease, there may be an oil leak into the system or a freon leak due to a microcrack that appears during shaking. In this case, independent repair is impossible; you need to call a technician to diagnose and possibly recharge the system.
Do you need to remove the doors when transporting through a narrow opening?
Yes, if the dimensions of the doorway are smaller than the width of the refrigerator, the doors must be removed. Hinges Beko usually fastened with bolts. The doors must be removed carefully, supporting them so as not to damage the fastenings. After installation in a new location, the doors are mounted back in the same sequence.