How to restart the refrigerator Combustion: instructions with explanations and warnings

Refrigerators Gorenje are famous for their reliability, but even they sometimes require a reboot - be it after a power surge, electronic unit failure or incorrect settings. Restarting the device can solve problems with the display, incorrect operation of the compressor, or errors in the system No Frost. However, incorrect actions lead to worsening malfunctions or even breakdown of the control board.

This article contains detailed instructions for how to reboot a refrigerator Burning different series (RK 60359, NRK 6191, NKI 6191 etc.), including models with electronic and mechanical control. We will look at:

• 🔌 When a reboot is really needed, and when repairs are required
• 📝 Step-by-step steps for refrigerators with and without a display
• ⚡ Possible risks and how to solve them avoid
• 🔧 Diagnostics after a restart: what to check first

All recommendations are based on official manuals Gorenje and the experience of service centers. If your modelReleased before 2018, check the relevance of the instructions in the documentation - the reset algorithms may have changed.

1. Signs that a Burning refrigerator needs a reboot

Not every strange behavior of equipment requires a restart. For example, if the refrigerator does not freeze due to freon leaks, resetting the settings will not help. But there are clear symptoms in which a reboot is justified:

• 📛 Errors on the display: codes E1, E2, E4 (for models with electronic control) or flashing indicators for mechanical versions. Gorenje NKI 6191, for example, may show E1 if there are problems with the temperature sensor.
• ❄️ Inadequate cooling: the freezer is working, but the refrigerator is not (or vice versa), although the thermostat is normal.
• 🔄 Cyclic on/off of the compressor with an interval of less than 5 minutes.
• 🖥️ Display freezes: does not respond to button presses or shows incorrect data (for example, temperature -88°C).

Reboot is also useful after power outages duration more than 10 minutes - this resets temporary errors in the controller memory. But if the problem repeats after 2-3 restarts, most likely the sensors are to blame. control board or sensors.

⚠️ Attention: If the refrigerator Gorenje makes noise when you try to turn on or smells like burning - loud. clicks when you try to turn on or it smells like burning - do not reboot it. These are signs of a short circuit or malfunction of the starting relay. Immediately disconnect from the network and call a technician.

2. Preparing to reboot: what to do before resetting

Improper preparation can lead to spoilage of food or damage to equipment Follow the checklist:

Remove all perishable products. (meat, dairy products, ready meals)

Turn off the function Super Cooling or Super Freezing (if available)

Make sure the doors are closed (for models with alarm)

Prepare a timer or stopwatch for counting time

Check the voltage in the socket (should be 220–240 V)

-->

If the refrigerator Gorenje is equipped with a system No Frost, after rebooting, the fan noise may temporarily increase - this is normal. For models with. drip defrosting (RK 60359) prepare a towel in case of condensation.

Important for refrigerators with a display: before resetting, take a photo of the current temperature settings (for example, +4°C for the refrigerator compartment and -18°C for the freezer compartment, after rebooting, the values will be reset to factory settings, and). they will have to be configured again.

3. How to restart the Burning refrigerator: step by step. instructions

The algorithm depends on the type of control. Below are instructions for three types of refrigerators Gorenje.

3.1. Models with electronic control (display)

Suitable for series NKI, NRK, NRC (for example, NRK 6191 WH, NKI 6191 AX).

1. Press and hold the button Super Cooling (or Super Freezing) for 10 secondsuntil the display goes dark.
2. Unplug the refrigerator on 1-2 minutes (use a timer!).
3. Turn it back on. Wait for initialization (factory settings will appear on the display, for example +5°C/-18°C).
4. Adjust the temperature again if necessary.

For models with touch controls (for example, Gorenje ORB153), instead of holding the button, use the combination: press Menu → Settings → hold OK 8 seconds.

3.2 Models with mechanical control (controllers)

Relevant for RK 60359, RK 4181 etc.

1. Turn the temperature regulator (usually located inside the refrigerator) to position 0 (off).
2. Unplug the plug from the socket on 5 minutes.
3. Turn it back on and set the regulator to the previous value (for example, 3 for average temperature).

If after rebooting the refrigerator does not turn on, check thermostat - it may be out of order.

3.3. Models with system Total No Frost (two-compressor)

Example: Gorenje NRKI 6199.

1. Press and hold the buttons simultaneously Fridge Temp and Freezer Temp for 15 seconds.
2. After the signal, disconnect the refrigerator from the network for 3 minutes.
3. Turn on and wait for the compressors to synchronize (it may take up to 10 minutes).

⚠️ Attention: If after rebooting the refrigerator Gorenje makes constant squeaking or lights up on the display E5, this indicates fan malfunction. not recommended - replacement of the part is required.

4. What to do if the reboot did not help

If the problems persist after the reset, perform diagnostics using the following algorithm:

• 🔍 Check the voltage in the outlet: it should be within the limits 220–240 V. Use a multimeter or connect another device (for example, a lamp).
• 📡 Inspect the power cord for damage. For models Gorenje with a replaceable cable (for example, NRK 6191), check the contacts at the point of connection to the case.
• ❄️ Check the vents (for No Frost) are not blocked by ice or products.
• 🔧 Listen to the compressor: if it hums but does not start, there may be a malfunction start relay.

For refrigerators with display Remember or take a photo of the error code, then check it with the table in the instructions. For example:

• E1 - problem with the temperature sensor of the refrigerator compartment.
• E3 - malfunction of the freezer compartment sensor.
• E5 - fan error (replacement required).

If the refrigerator Gorenje turns on, but does not cool, check:

1. Closing the door (the seal may be worn out).
2. The operation of the thermostat (for mechanical models).
3. The presence of ice on the evaporator (for systems No Frost).

What to do if the refrigerator does not respond to combustion reboot?

If after all the manipulations the refrigerator does not turn on, check:

1. Fuse in the plug (for models with a replaceable fuse, for example, RK 60359).

2. Control board - during power surges it often fails (sign: the display does not light up, but the compressor is humming).

3. Compressor capacitor —if a click is heard when turned on, but the motor does not start, the part requires replacement.

In 80% of cases, the malfunction is eliminated by replacing the board or relay, but this should be done by a specialist.

5. Frequent errors when rebooting the refrigerator Burning

Even a simple reset procedure can go wrong if you make one of these errors:

• ⏱️ Too short disconnection from the network. The capacitors in the control board are discharged for more than 30 seconds. data-i="207">(for electronic models - 2 minutes). 1 minute (for electronic models - 2 minutes).
• 🔌 Use. extension cord. Some extension cords with interference filters block a complete power reset.
• 📱 Ignoring error codes. For example, resetting in case of an error E5 (fan) can lead to overheating of the motor.
• 🧊 Rebooting during defrostingIf the refrigerator Gorenje s No Frost is in defrosting mode (fan noise is heard), wait until the end of the cycle (usually 20-30 minutes).

Critical error: attempt to reboot a refrigerator connected through a voltage stabilizer with a turn-on delay. Some stabilizers (for example, Resanta or Calm) have a soft start function that prevents a complete reset of the controller memory. Disconnect the stabilizer and connect the refrigerator directly.

Another common problem. — damage to the door seal after frequent opening during diagnostics, check that the rubber gasket is not jammed and fits tightly to the body.

6. Prevention of failures: how to avoid frequent reboots

To ensure that the refrigerator Gorenje operates stably, follow these rules:

• 🔌 Use a surge protector with protection against power surges (for example, APC SurgeArrestThis will prevent control board failures.
• 🧹 Regularly clean the condenser (grid on the back wall) from dust. Clogging leads to overheating and false errors.
• ❄️ Do not overload the freezerFor models No Frost leave a gap of 2-3 cm between the food and the walls for circulation. air.
• 📅 Defrost the refrigerator (even with No Frost) once every 6-12 months. Ice on the evaporator can cause sensor errors.

For electronically controlled refrigerators, it is useful to perform a soft reset once every 3 months soft reset:

1. Unplug the refrigerator for 30 seconds.
2. Plug it back in and wait for initialization (about 1 minute).

This clears temporary data in the controller's memory and prevents errors from accumulating.

7. When to call a technician: signs of serious malfunctions

Rebooting is first aid, but not a panacea Contact the service center Gorenjeif:

• 🔥 After resetting the refrigerator smells of burning or a spark is visible when turned on.
• ❄️ A a thick layer ice (more than 1 cm thick) is formed on the back wall in 1-2 days.
• 🔊 The compressor works continuously for more than 2 hours, but the temperature in the chambers does not drop.
• 📛 An error appears on the display E6, E7 or E8 —they indicate a faulty control board.

Refrigerator repair cost Gorenje in 2026:

For models under warranty (usually 2-3 years), repairs are free, but only if the failure is not caused by incorrect operation (for example, mechanical damage or connection to an unstable network).

⚠️ Attention: If the refrigerator Gorenje was purchased before 2020, check with the service center for the relevance of the warranty conditions. Some models older than 5 years may not be subject to free repair even if there is a manufacturing defect.

FAQ: Frequently asked questions about resetting Combustion refrigerators

Is it possible to reboot a Combustion refrigerator with No Frost? manually if it does not defrost?

Yes, but only if the defrosting cycle has been delayed for more than 24 hours. Unplug the refrigerator for 10-12 hours to allow the ice to melt naturally. Do not use a hair dryer or sharp objects - this will damage the evaporator. After turning on, wait until the fan reaches normal speed (it may take up to 30 minutes). data-i="282">Why, after rebooting, did the Combustion refrigerator begin to work loudly?

Why did the Burning refrigerator start making loud noise after rebooting?

This is normal for the first 1-2 hours after the reset: the compressor works in increased mode to restore the temperature. If the noise does not decrease after 3 hours, check:

• Installation level (the refrigerator should be level).
• Distance to the wall (minimum 5 cm for ventilation).
• Presence of foreign objects near the compressor.

For models with No Frost loud noise may indicate icing of the fan - defrosting is required.

How reset refrigerator settings Burning to factory settings?

For models with a display:

1. Press and hold Menu 5 seconds.
2. Select Reset or Factory Settings (depending on the model).
3. Confirm the reset (usually with a button OK).

For mechanical models, factory settings are restored automatically after disconnecting from the network for 5+ minutes.

What to do if, after rebooting, the refrigerator does not turn on?

Check:

• Voltage in the socket (should be 220–240 V).
• Integrity of the power cord and plug.
• Fuse (for models with a replaceable fuse).

If everything is in order, but the refrigerator does not respond, there may be a malfunction of the control board or compressor. Do not try to disassemble the refrigerator yourself - contact the service.

Is it possible to restart the refrigerator Burning during transportation?

No If the refrigerator was transported in a horizontal position, it cannot be turned on at least 4 hours after installation. This time is needed for the oil to settle in the compressor. Rebooting in this case is useless and can lead to motor damage.