Modern refrigerators of the brand Beko are famous for their reliability and sophisticated air purification systems, such as Active Fresh Blue Light or Ionizer. However, even the most advanced technologies cannot completely relieve the owner of the need to carry out regular mechanical cleaning. Dust, spilled liquids and condensation accumulate over time, creating an ideal environment for the growth of bacteria and the appearance of unpleasant odors that no filters can neutralize.
Many users mistakenly believe that the presence of a system No Frost completely frees them from worrying about the internal space of the unit. This misconception can lead to clogged drainage holes and failure of important components. Proper refrigerator care Beko is not just aesthetics, but a necessary measure to extend the life of expensive equipment and preserve the health of your family.
In this article we will analyze in detail the cleaning process, from preparation to final polishing of the external panels. You will learn which products are safe for plastic Beko, how to get to hard-to-reach places and what to do if a persistent smell has already settled in the chamber. A competent approach will allow you to avoid typical mistakes that are often made when cleaning yourself.
Preparation for the cleaning process and defrosting
Before starting any manipulations, it is necessary to empty the refrigerator and freezer compartments of food. Place perishable items in a bowl of ice or temporarily place them in another cold place if it is winter. Completely emptying the shelves will allow you to easily reach all corners of the interior space and thoroughly wash every part.
The next critical step is to disconnect the device from the power supply. Unplug the cord from the outlet to ensure complete safety when working with water and detergents. If your Beko equipped with a system No Frost, forced defrosting may not be required according to the instructions, however, for deep cleaning it is recommended to leave the doors open for at least 2-3 hours. This will allow excess moisture to evaporate and hidden ice in the evaporator to defrost.
⚠️ Attention: Never use sharp objects, knives or screwdrivers to chip ice. The plastic of the internal contour of refrigerators Beko is quite fragile, and its damage will lead to depressurization of the system and expensive repairs.
While the cameras are “resting”, remove all removable elements: shelves, vegetable drawers, egg trays and door baskets. It is more convenient to wash them separately in the bath or under the shower using warm water. Don’t forget to also remove the condensation tray if it is located in the lower part of the case, since water often stagnates there and mold forms.
☑️ Preparation checklist
Choosing safe detergents
Plastic used in refrigerators Bekois sensitive to aggressive chemicals. The use of abrasive powders, chlorine-containing bleaches or solvents can cause microcracks, discoloration of surfaces and destruction of the protective layer. Bacteria will subsequently accumulate in the cracks, and it will no longer be possible to wash them.
The optimal solution for regular cleaning is to use soft, neutral products. Solutions based on baking soda, vinegar or regular laundry soap work well to remove stains. These components are not only safe for food containers, but also effectively neutralize unpleasant odors without leaving a chemical aftertaste.
If you prefer household chemicals, choose specialized refrigerator cleaning sprays labeled “biodegradable” or “safe for contact with food.” Avoid products with strong fragrances, as the products may absorb extraneous scents. For disinfection, you can use a weak solution of hydrogen peroxide, which is odorless and safe after drying.
It is important to remember the proportions when preparing homemade solutions. Vinegar that is too concentrated can damage rubber seals, making them hard. It is enough to add 1-2 tablespoons of vinegar or soda per liter of warm water to get an effective and safe cleaning agent.
Cleaning the interior space and shelves
You should start general cleaning from the inner walls of the chamber. Dampen a soft sponge or rag in the prepared solution and thoroughly wipe all surfaces, moving from top to bottom. Pay special attention to the corners and joints of the panels, where dirt most often accumulates. For hard-to-reach places, you can use a soft toothbrush.
Glass shelves Bekousually have durable tempered glass, but they are susceptible to sudden temperature changes. If the shelves are cold, do not wash them with hot water - the glass may break. Let them come to room temperature or use only warm water. After washing, be sure to wipe all elements dry to avoid the formation of plaque.
| Refrigerator element | Recommended product | Tool | Features |
|---|---|---|---|
| Internal walls | Soda solution (1 tbsp per 1 liter) | Soft sponge | Do not rub with an abrasive |
| Glass shelves | Glass cleaner or soap solution | Microfiber cloth | Avoid temperature changes |
| Plastic boxes | Warm water and soap | Brush with soft bristles | Rinse thoroughly |
| Egg tray | Vinegar solution | Toothbrush | Disinfection is required |
After treating all surfaces with clean water Wipe the inside walls again with a dry cloth. Humidity is the main enemy of the refrigerator, contributing to the development of mold. Make sure that there are no drops of water left in the chamber before putting the shelves back.
How to remove stubborn stains?
If there are greasy stains on the plastic that cannot be wiped off in the usual way, apply a paste of soda and water to them. Leave on for 10-15 minutes, then gently rub with a soft sponge and rinse. Do not use a knife or blade!
Care for seals and drainage system
The rubber door seal is the element that is most often ignored when cleaning, and it is this that becomes the source of unpleasant odors and loss of tightness. Crumbs, juice and mold accumulate in the folds of rubber. Wipe the seal with a damp cloth and soapy water during each general cleaning.
To disinfect rubber, you can use a weak solution of vinegar, but after that, be sure to wipe the surface with a dry cloth. The rubber should not dry out, so once every six months it is recommended to lubricate the seal with a special silicone spray or glycerin. This will maintain the elasticity of the material and prevent the appearance of cracks.
⚠️ Attention: If you notice that the door Beko does not fit tightly or the seal is deformed, do not try to straighten it with boiling water or a hairdryer. This can completely ruin the tires. It is better to contact a service center to replace the part.
The drainage hole located on the back wall of the refrigerator compartment also requires attention. It is through this that the condensate is discharged. If it becomes clogged with dirt, water will start to drip onto shelves or under drawers. You can clean the channel using a special flexible brush or a cotton swab dipped in warm water.
In models with the system No Frost the drainage is located inside, often behind the rear panel. It's harder to get to, but if you notice water at the bottom of the freezer, it's a sign of a blockage. In such cases, it may be necessary to remove the back wall, which is better to entrust to specialists if you are not confident in your abilities.
Cleaning the external surface and compressor
Exterior of the refrigerator Beko often suffers from grease splashes in the kitchen and fingerprints, especially if the surface is made of stainless steel or glossy plastic. To clean, use a mild dishwashing detergent diluted in water. Movements should be smooth, along the texture of the metal, to avoid scratches.
The back of the case requires special attention, since there is a condenser (black grille) and a compressor. Dust settling on these elements acts as a heat insulator, forcing the motor to work with increased load. This leads to an increase in energy consumption and a reduction in the service life of the unit.
To clean the rear grille, use a vacuum cleaner with a narrow attachment or a dry soft brush. Carefully walk between the bars of the grill, removing dust and cobwebs. If the dirt is heavy, you can use a slightly damp cloth, but make sure that water does not get on the electrical contacts and wiring.
Don't forget to wipe the top cover of the refrigerator, where a layer of kitchen grease often accumulates. Kitchen surface cleaners are good for this, but they must be thoroughly rinsed off so that chemicals do not get inside when opening the door.
Odor removal and final assembly
After wet cleaning is completed and all surfaces are dry, it may be necessary to eliminate residual odors. Even if you used vinegar, the aroma should dissipate. Natural absorbents are excellent for final neutralization of odors.
Place open containers with activated carbon, ground coffee, soda or citrus zest inside the chambers. These substances effectively absorb foreign odors. There are also special odor absorbers for refrigerators, which can be purchased at hardware stores.
When everything is clean and dry, reassemble the refrigerator in the reverse order: install shelves, drawers and door baskets. Make sure that all elements fit securely into place. Now you can connect the device to the network. Let it work for 1-2 hours without food so that it reaches the desired temperature.
⚠️ Attention: Do not load the refrigerator with food immediately after turning it on. Allow the equipment to reach operating cooling mode, otherwise the compressor will work hard trying to cool warm products.
Only after the temperature has stabilized can you carefully arrange the products. Keeping the refrigerator clean Beko is the key to the freshness of your products and the durability of the appliance itself. Regular maintenance does not take much time, but the result is worth it.
Why does the refrigerator smell after cleaning?
If the smell remains after cleaning, check the drainage hole and the space behind the back panel. Stagnant water or mold could have accumulated there, which the rag could not reach.
Is it possible to wash the refrigerator Beko with a steam generator?
The use of a steam generator is not recommended for internal plastic surfaces, since hot steam can deform thin plastic. In addition, excess moisture can get into electrical components. Only rubber seals and external metal surfaces can be gently treated with steam, using caution.
How often should you defrost the refrigerator Beko No Frost?
Technically, the system No Frost does not require manual defrosting to remove ice. However, for hygienic cleaning and prevention, it is recommended to completely turn off and defrost the refrigerator at least 1-2 times a year. This will allow you to thoroughly wash all inaccessible places and check the condition of the seals.
What cannot be used to wash the plastic inside the refrigerator?
It is strictly forbidden to use bleach, acetone, gasoline, abrasive powders (such as Pemolux) and hard metal sponges. These products destroy the structure of the plastic, make it rough and contribute to rapid contamination in the future, and can also be toxic to products.
What to do if after cleaning the refrigerator hums more?
If a strong hum appears after cleaning, check whether you have moved the refrigerator close to the wall or furniture. For normal operation, the gap between the back wall and the furniture should be at least 5-10 cm. Also make sure that when installing the shelves you do not touch the ventilation holes.