Replacing the door on a refrigerator Indesit is a task that sooner or later faces every owner of this equipment. The reasons can be different: from a banal broken hinge to a desire to update the kitchen design or rehang the door to the other side. Unlike calling a technician, replacing it yourself can save you up to 3,000–5,000 rubles, but requires accuracy and knowledge of key nuances. For example, improper fastening of the hinges can lead to door misalignment and cold leakage, and errors when working with gas-filled models can lead to damage to the seal.
In this article we will analyze the process of replacing the door for all popular models Indesit (including series C 167 NF, TIA 16, BIAA 13 and others), we will pay attention to typical tools problems and ways to solve them. We will pay special attention to models with the system No Frost —they have their own mounting features. If your refrigerator is older than 10 years, check the availability of spare parts in advance: some parts for older series are no longer produced.
When the door needs to be replaced: signs and reasons
Before you start replacing, make sure that the problem is really in the door and not in other components of the refrigerator. Here are the key signs indicating the need for repair or replacement:
- 🔧 Cracks or chips on the plastic door body (especially dangerous in corner areas - they can lead to destruction of the entire panel).
- 🚪 Door misalignmentdue to which it does not close tightly or scratches the body when opened.
- 🧊 Ice on the seal or condensation inside the chamber is a sign of a leak.
- 🔊 Creaking and foreign objects sounds when opening/closing (most often associated with wear of the hinges).
- 🔄 The desire to rehang the door to the other side (for example, when rearranging the kitchen).
If the door is simply sagging, it can be adjust without complete replacement. To do this, it is enough to tighten the hinges or replace worn bushings. But in case of mechanical damage (cracks, chips) or breakage of the lock, a complete replacement will be required. Please note: in models Indesit s electronically controlled (for example, ITF 118 W) the door may be connected to an alarm system. When replacing it, you may need to reset errors through the service menu.
⚠️ Attention: If your refrigerator is equipped with a system Total No Frost or has built-in display, before replacing the door, be sure to disconnect it from network for 10–15 minutes. This will prevent malfunctions of the electronic modules.
Preparation: tools and spare parts
To replace the door on the refrigerator Indesit you will need:
| Tool/part | Purpose | Notes |
|---|---|---|
| Phillips screwdriver (PH2) | For unscrewing hinges and fastenings | Preferably with a magnetic tip |
| Hexagon (4 mm) | For adjusting hinges in some models | Used in series BIAA i TIA |
| Flat screwdriver | For removing decorative plugs | Suitable for medium size |
| New door or hinges | Replacement of damaged elements | The article must match the refrigerator model |
| Silicone grease | For processing hinges after installation | Use food-grade grease |
If you are buying a new door, pay attention to her article number. The Indesit e have unified models (for example, the C 138 i C 168 series are suitable for the same doors), but some modifications require individual parts. The article number is usually indicated on a sticker inside the refrigerator or in the product passport. If the original door is not on sale, you can choose an analogue from third-party manufacturers (for example Euronics or Ardo), but make sure that the fasteners are compatible.
Before starting work free up space around refrigerator - you will need at least 1 meter for maneuvers. If the door is heavy (for example, in models with double glass), ask an assistant to secure it when removing it. Do not forget that the weight of the door can reach 10–15 kg!
☑️ Preparing to replace the door
Step-by-step instructions: removing the old door
The process of removing the door depends on its type: single-chamber (freezer and refrigerator are separated by a partition) and double-chamber (with separate doors). We will consider a universal algorithm suitable for most models Indesit.
Step 1. Removing decorative plugs.
On most refrigerators Indesit the hinges are closed with plastic plugs. To remove them, use a flathead screwdriver to pry them from the side and pull them towards you. In some models (for example, Indesit ITF 118), the plugs are attached to latches - they need to be carefully pushed up.
Step 2. Unscrewing the top hinge.
The top hinge is usually fixed with 2-3 bolts. Unscrew them with a Phillips screwdriver while holding the door (it may fall!). In models with top freezer (for example, Indesit C 167 NF), first the freezer door is removed, then the refrigerator door.
Step 3. Removing the door from the bottom hinge.
After unscrewing the top bolts, carefully lift the door up to remove it from the bottom pin. If the door is “jammed”, do not force it - check that all the bolts are unscrewed. In some models, the bottom hinge is also secured with a bolt (for example, in the series BIAA).
Step 4. Disconnecting wires (for models with a display).
If your refrigerator is equipped with an electronic control (for example Indesit ITF 118 W), before completely removing the door, disconnect the display power connector. It is usually located under the top loop and is secured with a plastic latch.
What to do if the bolts do not unscrew?
If the bolts are stuck or rusted, use a penetrating lubricant (for example, WD-40), apply it to the threads, wait 10-15 minutes and try unscrewing again. use an impact screwdriver or carefully drill the bolt with a drill of a smaller diameter.
Installing a new door: nuances and adjustment
Before installing a new door, check state of the hingesIf they are worn or deformed, they should also be replaced. Indesit two types of hinges are used: dismountable (individual elements can be replaced) and non-removable (complete replacement required).
Step 1. Installing the door on the lower hinge.
Carefully place the door on the lower hinge pin, making sure that it sits straight. If the door is skewed, remove it and try again. data-i="157">(for example, automatic closing (For example, Indesit TIA 16) make sure that the mechanism is not blocked.
Step 2. Fixing the top hinge.
Holding the door, screw in the bolts of the top hinge. Don't tighten them all the way at once - first check that the door hangs straight. If there is a skew, loosen the bolts and adjust the position.
Step 3. Adjusting the hinges.
After preliminary fixation, check how the door closes:
- 🔄 It should close smoothly, without jerks.
- 🚪 The gap between the door and the body should be uniform (2–3 mm).
- 🧲 Magnetic seal should fit tightly along the entire perimeter.
If the door sags or does not close well, adjust the hinges using a hexagon (in models Indesit BIAA 13) or tighten the bolts. In some cases, replacement may be required - they wear out over time and lead to play. hinge bushings - they wear out over time and lead to backlash.
Reversing the door to the other side
If you decide to rehang the door (for example, from the left side to the right), the algorithm of actions will be a little more complicated. Most models Indesit are provided for this purpose symmetrical holes hinges, but some budget series (for example, Indesit ST 167may not have them - then you will need to drill new ones.
Step 1. Rearranging the hinges.
Remove the old hinges and install them on the opposite side. In models with top freezer the freezer door is rehung first, then the refrigerator door. Please note opening direction: some hinges have an asymmetrical shape and are not suitable for rehanging.
Step 2. Reinstalling the handle.
Handles in refrigerators Indesit are usually attached to screws hidden under decorative plugs. Remove the plugs, unscrew the screws and move the handle to the other side. In some models (for example, Indesit C 138), the handle is integrated into the door and cannot be rearranged - in this case, it will have to be replaced with a new one.
Step 3. Checking the seal.
After rehanging, check whether it is deformed magnetic seal. If the door now opens the other way, the seal may lose its elasticity. In this case, it needs to be heated with a hairdryer (temperature 50–60°C) and carefully leveled.
⚠️ Attention: In refrigerators with No Frost system when rehanging the door, rearrangement may be required air ducts. If you are not confident in your abilities, it is better to contact a specialist - incorrect rearrangement will lead to disruption of air circulation and the formation of ice.
Typical errors and how to do them avoid
Even with careful door replacement, mistakes can be made that will lead to new problems. Here are the most common of them:
- 🔧 Incorrect tightening of the bolts. If you tighten the hinges, the door will close with force, which will lead to wear on the seal. If you don't tighten it enough, there will be a backlash.
- 🧲 Ignoring the magnetic seal. After replacing the door, the seal may “move away” from the body. Check its fit with a sheet of paper: if it falls out, the seal is broken.
- 🔄 Mismatch of models. Installing a door from another model Indesit (for example, from C 167 to TIA 16) can lead to mismatched fasteners or imbalance.
- 🛠️ Damaged wires. In models with a display, careless removal of the door can damage the power cable. This will lead to errors on the screen (for example,
E01orE02).
If after replacing the door on your own opens, the problem may be:
- Incorrect adjustment of the hinges (you need to tighten the top hinge).
- Deformed seal (replacement required).
- Incorrect position of the refrigerator (check the floor level - it should be level).
In models Indesit with the Total No Frost system, after replacing the door, error E04 may appear (problem with the fan). This is due to the fact that when the door is removed, the opening sensor is triggered. To reset the error, unplug the refrigerator for 1 minute, then turn it back on.
Care after replacement: how to extend its service life
So that the new door lasts as long as possible. longer, follow these recommendations:
- 🧼 Clean the seal regularly. Use a soap solution and a soft sponge. Do not use abrasives - they will damage the magnetic tape.
- 🛢️ Lubricate the hinges 1-2 times a year. Silicone or Teflon lubricant is suitable. Do not use oils. petroleum-based - they attract dust.
- 🚫 Do not slam the door. Abrupt closing leads to loosening of the hinges and deformation of the seal.
- ⚖️ Check the balance. If the door begins to sag, immediately adjust the hinges - this will prevent serious damage.
If your refrigerator is equipped with open door alarm system, after replacing, check its operation. To do this, open the door for 1-2 minutes - a sound signal should sound. If there is no signal, check the connection of the sensor (it is usually located on the top hinge).
FAQ: Frequently asked questions about replacing an Indesit door
Is it possible to replace the door on an Indesit refrigerator yourself if you have no experience?
Yes, but only if you are confident in your abilities. Start with simple models without electronic control (for example, Indesit ST 167For refrigerators with). display or system No Frost it is better to invite a specialist - errors during replacement can lead to damage to the electronic modules.
How much does it cost to replace a door at a service center?
The cost depends on the model and region: On average: hinge replacement —. 1500–2500 rubles, replacement of the entire door —3000–6000 rubles (excluding the cost of the part).
Some services offer discounts when purchasing spare parts from them.
Where to buy an original door for Indesit?
Original spare parts can be ordered: on the Indesit website (section "Spare parts"), at branded service centers, on marketplaces (Ozon, Wildberries, Yandex Market).
Before purchasing, check article the doors with the refrigerator passport.
What to do if, after replacing the door, the refrigerator begins to make noise?
Noise can occur for several reasons: door misalignment (you need to adjust the hinges), entry of foreign objects in the mechanism hinges wear of bushings (replacement required).
If the noise is similar to humming, check whether it is touching case door when closing.
Is it possible to paint or paste over the refrigerator door?
Yes, but with reservations: For painting use special paints for plastic (for example, Plasti Dip). For pasting self-adhesive film is suitable, but avoid thick materials - they can interfere with closing.
Before decorating, remove the door and clean it of grease.