Replacing a light bulb in the Pozis refrigerator: video instructions and step-by-step guide

When a light bulb burns out in the refrigerator, it creates discomfort: you have to illuminate the shelves with a flashlight or open the door wider to see the contents. Many users mistakenly think that for such a replacement it is necessary to call a specialist, but in fact the procedure takes no more than 15 minutes - if you know the nuances of the model. In this article, we will look at how to independently change the lamp in refrigerators Pozis a light bulb burns out, which creates discomfort: you have to illuminate the shelves with a flashlight or open the door wider to see the contents. Many users mistakenly think that for such a replacement it is necessary to call a specialist, but in fact the procedure takes no more than 15 minutes - if you know the nuances of the model. In this article we will look at how to change the lamp in refrigerators yourself. Pozis of different series, select suitable analogs and show a video with a visual process.

The main difficulty lies not in the replacement itself, but in the correct choice of the light bulb. Depending on the year of manufacture and model, different types of bases can be used - from classic to miniature. We have compiled a compatibility table and added tips on how to avoid mistakes when purchasing. And if you are afraid of making a mistake, at the end of the article there is a video instruction with a step-by-step analysis using a real example. Pozis different types of socles can be used - from classic E14 to miniature W2.1x9.5d. We have compiled a compatibility table and added tips on how to avoid mistakes when purchasing. And if you are afraid of making a mistake, at the end of the article there is a video instruction with a step-by-step analysis using a real example.

Which light bulbs are suitable for Pozis refrigerators

In most models Pozis (series RFN, RKFN, RDFN) lamps with a base are installed E14 power up to 15 W. However, in new modifications (for example, Pozis RKFN-140 2023–2026), the manufacturer switched to energy-saving LED lamps with base W2.1x9.5d. The latter last 5–7 times longer, but are more expensive.

Important: even if the bulbs look the same externally, they may differ in voltage. Refrigerators Pozis use power 12 V or 220 V —this depends on the connection diagram. As a rule, models with electronic control (Pozis RDFN-100W) have a low-voltage lamp, and mechanical ones have a standard 220 V lamp.

• 💡 Classic incandescent lamps: base E14, power 15–25 W, voltage 220 V. Suitable for older models until 2018.
• 🔆 Halogen lamps: base G4 or W2.1x9.5d, power 10–20 W, voltage 12 V. Installed in refrigerators with LED backlight.
• 🌟 LED lamps: base W2.1x9.5d or E14 (depending on the model), power 1–3 W, voltage 12 V. The most durable option.

⚠️ Attention: In refrigerators Pozis with the system No Frost the light bulb can be integrated into the lamp with a door closing sensor. In this case, replacement requires care - if the sensor contacts are damaged, the refrigerator will begin to display an error E1 (door malfunction).

Tools and preparation for replacement

To replace the light bulb in the refrigerator Pozis you do not need professional tools, but there are several required items:

• 🔧 Phillips screwdriver (for removing the lampshade in models RKFN and RDFN).
• 🧤 Gloves (will protect against cuts from the sharp edges of the plastic and prevent greasy marks on the bulb).
• 📸 Smartphone (to photograph the location of the wires before disconnecting).
• 🔦 Flashlight (will illuminate the work area if the light bulb has already burned out).

Before starting work be sure to unplug the refrigerator. In models with electronic control (Pozis RDFN-100W), after turning on the power, the power surge protection may work - you will have to wait 5-10 minutes before restarting.

Disconnect the refrigerator from the socket

Remove all products from the top shelf (if the lamp is attached from above)

Prepare a replacement (check the base and voltage)

Take a photo of the wire connection (for models with connectors)

Wear gloves for protection hands-->

In some refrigerators Pozis the lampshade is secured with latches rather than screws. To remove it, you need to carefully pry it from the side with a screwdriver and pull it towards you. If the lampshade does not give way, do not use force: in models with LED backlighting there may be some inside fragile contacts that are easy to damage.

Step-by-step instructions: how to change a light bulb

The replacement algorithm depends on the type of mounting of the lampshade. Below we will look at the two most common options for refrigerators Pozis.

Option 1: Screw-mounted lampshade (models RFN, RK-160)

1. Unplug the refrigerator and wait until the light bulb has cooled down (if it was on recently).

2. Remove the top shelf or push it forward to gain access to the shade.

3. Unscrew the two screws with a Phillips screwdriver (located along sides of the lampshade).

4. Lower the lampshade down and carefully disconnect the light bulb by turning it counterclockwise (for the base E14) or pulling it towards you (for the base W2.1x9.5d).

5. Install the new lightbulb, making sure that it fits tightly into the grooves. Do not apply excessive force!

6. Plug the lamp back in and secure it with screws.

Option 2: Lamp with snaps (models RDFN, RKFN)

1. Turn off the power and remove the top shelf.

2. Find There are small grooves on the side of the lampshade (usually there are two - on the right and on the left).

3. Carefully pry the lampshade with a flat screwdriver or knife, starting from one edge. It should come out of the grooves with a characteristic click.

4. Disconnect the power connector (in some models it is attached to a clip).

5. Replace the light bulb, observing the polarity (for LED and halogen lamps).

6. Install the lampshade back, starting from the top, and snap it in until it stops.

What to do if the light bulb does not light after replacement?

If after installing a new lamp the light does not appear, check:

1. Contact density — perhaps the light bulb is not fully inserted into the base.

2. Wiring integrity —inspect the wires for breaks or oxidation.

3. Voltage — if you put a 12 V lamp instead of 220 V (or vice versa), it will not work.

4. Door switch —in Pozis refrigerators with the No Frost system, the light turns on only when the door is open. Check whether the button works (it is located next to the lampshade).

In models Pozis RDFN-100W the lamp can be rigidly connected to the temperature sensor. If, when replacing the light bulb, you accidentally touched the sensor wires, the refrigerator may start to freeze less or display an error. In this case, it is better to contact a service center.

Video instruction: replacing a light bulb using the example of Pozis RKFN-140

For clarity, we have prepared a selection of videos with a step-by-step analysis of the process. Please note: the videos show different models Pozis, so the method of attaching the lampshade may differ.

🎥 Video 1: Replacing an incandescent lamp in Pozis RFN-120 (base E14)

🎥 Video 2: Installing an LED lamp in Pozis RDFN-100W (base W2.1x9.5d)

🎥 Video 3: Disassembling the lampshade with snaps (model Pozis RKFN-140W)

If the lampshade in your refrigerator is mounted differently, write the model in the comments - we will help you find a suitable video or give personal recommendations.

Incandescent lamp (E14). data-i="171">Even with the apparent simplicity of the procedure, users often make mistakes that lead to repeated breakdowns or even failure of the refrigerator electronics. Here are the most common ones:

Halogen (G4 or W2.1x9.5d)

Light-emitting diode (LED)

I don’t know, I haven’t changed it-->

Common mistakes and how to avoid them

Even with the apparent simplicity of the procedure, users often make mistakes that lead to repeated breakdowns or even failure of the refrigerator electronics. Here are the most common of them:

• ⚡ Ignoring voltage: installing a 220 V lamp in a refrigerator with a 12 V power supply (or vice versa) leads to instant burnout or short circuit.
• 🔌 Incorrect connection of connectors: in models with LED backlighting, reversed polarity leads to flickering or complete failure of the lamp.
• 💥 Use of force: trying to pull out a jammed lamp or lamp may damage the fasteners or contacts.
• 🧊 Replacement with the power on: this is not only life-threatening, but can also burn the control unit in refrigerators with an electronic display.

⚠️ Attention: B refrigerators Pozis with an inverter compressor (models RDFN-100W and newerafter turning off the power, you must wait at least 5 minutes before turning them on again. Otherwise, the system may display an error E4 (compressor overload).

Another typical problem is buying a light bulb "by eye". For example, Pozis RKFN-140 outwardly it fits both E14and W2.1x9.5d, but the second one requires low voltage. To avoid mistakes, always check the technical data sheet of the refrigerator or take pictures. an old light bulb before buying a new one.

Where to buy a light bulb for a Pozis refrigerator

You can purchase a replacement in several places:

• 🏬 Service Pozis centers: they are guaranteed to pick up an original light bulb, but the price may be inflated.
• 🛒 Electronics stores (for example, "Electrosila", "220 Volt"): a wide range of bases, but there are not always specialized models for refrigerators.
• 🌍 Online platforms (Wildberries, Ozon, AliExpress): cheaper, but the risk of running into poor quality product. Pay attention to the reviews!
• 🔧 Stores of spare parts for household appliances: often sell universal lamps suitable for different brands.

Average cost of light bulbs Pozis:

• Incandescent lamp (E14, 220 V) - 50–150 ₽.
• Halogen lamp (W2.1x9.5d, 12 V) - 200–400 ₽.
• LED lamp (W2.1x9.5d, 12 V) - 300–800 ₽.

When buying online, check with the seller whether the lamp is suitable for refrigerators - some LED models are designed for cars and have a different operating temperature range.

When is the best time to call technicians

In most cases, you can replace the light bulb in the refrigerator Pozis on your own, but there are situations when it is better to contact a specialist:

• 🔧 The lampshade is rigidly connected to the electronic control unit (found in models with a touch screen).
• ⚡ After replacement, the refrigerator displays an error on the screen or does not turn on.
• 💡 The light bulb is integrated into the system No Frost and requires soldering of contacts.
• 🔌 When removing the lampshade, you found melted wires or traces of burning.

The cost of calling a technician to replace a light bulb is on average 800-1,500 ₽ (excluding the cost of the lamp itself). If the refrigerator is under warranty, repairs can be free - but only if the breakdown was not your fault (for example, due to a manufacturing defect).

⚠️ Attention: In service centers Pozis light bulbs are not always available for older models (manufactured before 2018). Check this point in advance so as not to pay for a technician in vain.

FAQ: Frequently asked questions about replacing a light bulb in Pozis

Is it possible to replace an incandescent lamp with an LED one?

Yes, but only if the base and voltage match. For example, in Pozis RFN-120 with a base E14 and a voltage of 220 V, you can install an LED lamp E14 at 220 V. However, LED lamps for refrigerators are usually designed for 12 V - install them no!

Why does the new light flash or light dimly?

This is a sign of a malfunction in the power circuit. Possible reasons:

• Bad contact in the lamp connector.
• Failure of the door switch (the lamp lights up only when the door is open).
• Power surges in the network (relevant for incandescent lamps).

Check all connections and, if necessary, contact service.

How to remove the ceiling light if it cannot be removed?

In some models Pozis the lampshade is attached to hidden latches. Try:

1. Gently pull it down, slightly rocking it from side to side.
2. Pry it out with a thin-blade screwdriver (but do not use force!).
3. Watch a video analysis for your model - perhaps there is a hidden lock there.

If the lampshade does not budge, do not take risks - call a specialist.

How long does the light bulb in the Pozis refrigerator last?

The service life depends on the type:

• Incandescent lamp - 1 000–1,500 hours (~1 year with active use).
• Halogen lamp - 2,000-3,000 hours (~2 years).
• LED lamp - up to 10,000 hours (~5-7 years).

Durability also influenced by voltage drops and the frequency of door opening.

Is it possible to use a light bulb from another refrigerator?

It is possible if three parameters match: base, voltage and powerFor example, a lamp from Atlanta s. base E14 and voltage 220 V is suitable for Pozis RFN-120But keep in mind that some refrigerators use non-standard connectors.