Replacing a light bulb in a Pozis refrigerator: instructions with photos and nuances for different models

Replacing a lamp in a refrigerator Pozis is a task that sooner or later faces every owner of this equipment. Even in reliable models, the lighting dims or burns out over time, and buying a new refrigerator because of one lamp is an irrational decision. Fortunately, the replacement procedure is simpler than it seems: it does not require special skills or expensive tools. The main thing is to know the exact model of your refrigeratorthe type of lamp and follow basic safety rules.

In this article we will analyze the process of replacing a light bulb for all popular series Pozis (including RK-101, RK-149, DK-108 and others), we will indicate where to buy suitable ones lamps, and warn against common mistakes. And you will also find out why the lamp may flicker or not light even after replacement - this is an often overlooked but important point.

Preparation: what you need to know before replacing

Before you take a screwdriver, make sure that the problem is in the light bulb. Sometimes the lighting does not work due to:

• 🔌 Faulty door switch —check if it clicks when you open the door.
• 🔋 Problems with power supply —if the refrigerator does not freeze, the socket or power cord may be to blame.
• 💡 Oxidized cartridge contacts —they can be cleaned with alcohol.

If the lamp is really burnt out, determine its type. Refrigerators Pozis use:

• 💡 Incandescent lamps (power 15–25 W) - in older models until 2015.
• 💡 Halogen lamps (12–20 W) - in models 2016–2020 years.
• 💡 LED lamps (3-5 W) - in new refrigerators after 2021.

Attention to the markings! On the lamp base for Pozis the parameters are usually indicated: E14 (the most common), E10 (in compact models) or G4 (for halogen). If there is no marking, take a photo of the lamp and show it to the seller in the store - he will select an analogue. LED lamps for Pozis refrigerators must be designed to operate at low temperatures (from −5°C), otherwise they will quickly fail.

⚠️ Attention: In refrigerators with a No Frost system (for example, Pozis RK-149W), the lamp may be hidden under the decorative panel. Do not try to remove it by force - first read the instructions for the model!

Tools and materials: what you will need

To replace the light bulb in the refrigerator Pozis you do not need a professional tool. Enough:

• 🔧 Phillips screwdriver (size PH2) - for most models.
• 🔧 Flat screwdriver - if the lampshade is secured with latches.
• 🧤 Gloves - to avoid leaving fingerprints on the new one lamp (especially important for halogen ones).
• 📸 Smartphone - for photographs of the connection (in case the wires get mixed up).

If the lamp stick to the socket (relevant for old refrigerators), maybe you will need:

• 🧴 WD-40 or alcohol - to process the base.
• 🧲 Insulated pliers to carefully unscrew the lamp.

Where to buy a lamp? The best options:

• 🛒 Official Pozis service centers - guaranteed to select an original part.
• 🛒 Electrical goods stores (for example, "Leroy Merlin", "OBI") - look for lamps marked "for refrigerators".
• 🛒 Online platforms (Wildberries, Ozon) - check compatibility with in the description Pozis.

Step-by-step instructions: how to replace a light bulb

The replacement process differs depending on the model, but the general scheme is as follows:

1. Unplug the refrigerator from the mains. Don't just pull it out plug, and wait until the interior light goes out (about 1 minute).
2. Take out all the products from the top shelf (if there is a lamp there) or from the backlight area.
3. Remove lampshade:
   • In most models (for example, Pozis RK-101) it is attached with one screw in the center.
   • In refrigerators with No Frost (for example, RK-149W) the lampshade can be fixed latches - pry it off with a flat screwdriver.

Unscrew the lamp counterclockwise. If it does not give in:

What to do if the lamp is stuck?

Wrap the base with electrical tape or a rubber band to avoid getting hurt, and carefully scroll left and right, while pulling down at the same time. If it doesn’t help, spray with WD-40 and wait 5 minutes

Install the new lamp, screwing it in until it stops, but without force (an overtightened base may burst).

Check the operation, turning on the refrigerator. The lamp should light up immediately when the door is opened.

For models with LED backlight (for example, Pozis DK-108) the process is more complicated:

1. Remove the decorative panel on the ceiling of the camera (it is secured with latches).
2. Disconnect the power connector of the LED module (usually it is on a clip).
3. Replace the entire module - the individual diodes in them do not change.

⚠️ Attention: In refrigerators Pozis with electronic control (for example, RK-149W) after replacing the lamp, an error may appear on the display. This is normal - the error will reset automatically after 10-15 minutes of operation. E1 on the display. This is normal - the error will reset automatically after 10-15 minutes of operation.

Typical errors and how to avoid them

Even in such a simple procedure it is easy to make mistakes. Here are the most common:

• 🔌 Unplugged power —risk of electric shock or short circuit. Always remove the plug from the socket!
• 💡 Use of force when unscrewing the lamp —the base may remain in the socket and the glass may be damaged hands.
• 🧤 Touching a halogen lamp with bare hands - oil from the fingers shortens the life of the lamp.
• 🔧 Loss of screws or latches - without them the lampshade will not hold on, and the lamp will quickly burn out from moisture.

Another common problem is the lamp does not light after replacement. Reasons:

• 🔌 Faulty cartridge —check with a multimeter or replace the entire cartridge.
• 🔌 Oxidized contacts —clean them with an eraser or alcohol.
• 🔌 Problems with the door switch —if it does not click, replacement is required.

Features of replacement in Pozis refrigerators with No Frost

Models with the system No Frost (for example, Pozis RK-149W, DK-108NF) have their own nuances:

• 🌬️ The lamp is often hidden behind the ventilation grille —it must be carefully removed without damaging the plastic latches.
• 🔌 The socket can be part of the backlight unit —in this case the entire module is changed.
• ❄️ You need to work quickly —when When the door is open for more than 10 minutes, ice builds up on the evaporator.

In some models (for example, Pozis RK-167) the lamp is connected via thermal fuse. If it burns out, the backlight will not work even with a new lamp. Checked with a multimeter in continuity mode:

1. Disconnect the connectors from the socket.
2. Touch the fuse contacts with the probes.
3. If there is no sound signal, the fuse faulty.

⚠️ Attention: In refrigerators Pozis with a display (for example, RK-149W) after replacing the lamp, you may need to reset the error. To do this, press and hold the button for 5 seconds. data-i="210">💡 Incandescent lamps Super Cool 5 seconds.

Where to buy a lamp for a Pozis refrigerator: prices and analogues

Original lamps for Pozis cost from 150 to 500 rubles depending on the type:

• 💡 Incandescent lamps E14 (15 W) - 150–250 rubles.
• 💡 Halogen lamps G4 (12 W) - 200–350 rubles.
• 💡 LED modules - 400–800 rub. (depending on the model).

If the original lamp is not on sale, analogues will do:

When purchasing, please specify:

• 🔍 Case (E14, E10, G4).
• 🔍 Voltage (usually 220–240 V, but in some models 12 V).
• 🔍 Temperature mode (must operate at −5°C and below).

When is it better to call a specialist

Replacing the light bulb in the refrigerator Pozis can be done independently, but in some cases it is better to contact a specialist:

• 🔌 If after replacing the lamp flashes or does not light, and the cartridge and wiring are visually in good working order.
• 🔌 If, when dismantling the lamp the wires are damaged or contacts.
• 🔌 If the refrigerator with electronic control (for example, RK-149W) shows an error that cannot be reset.
• 🔌 If the lamp built into the control unit (relevant for some models after 2022).

The cost of replacing the lamp at the service center:

• 💰 Independent replacement — 0 rub. (lamp price only).
• 💰 Calling a specialist to your home — 800–1500 rub. (depending on the region).
• 💰 Replacement at a service center — 500–1000 rubles. + cost of the lamp.

If the refrigerator is under warranty, do not try to change the lamp yourself - this may void the warranty. Contact authorized Pozis service center (the list is on the brand's official website).

FAQ: Frequently asked questions about replacing the lamp in a Pozis refrigerator

Is it possible to use an LED lamp instead of a lamp incandescent?

Yes, but keep in mind:

• 💡 The power of the LED lamp should be 4-5 times less (for example, instead of 15 W, take 3-4 W).
• 💡 The base must match (E14, G4 etc.).
• 💡 The LED lamp should not heat up - otherwise the lampshade will melt.

For models Pozis LED lamps marked "for refrigerators" are suitable (for example, ASD LED-E14-5W-4000K).

Why does a new lamp burn out quickly?

Reasons:

• 🔌 Power surges - install a stabilizer.
• 🔌 Poor contact in the socket — clean or replace the socket.
• 🔌 Frequent opening of the door —the lamp turns on/off, which shortens its service life.
• 🔌 Inappropriate type of lamp (for example, a regular LED instead refrigeration).

How to remove the lampshade if it is not removable?

Possible solutions:

• 🔧 Check whether there is hidden screws under the stickers or rubber plugs.
• 🔧 If the lampshade is on latches, try prying it plastic card (so as not to scratch it).
• 🔧 In models with No Frost the lampshade can be attached to the ventilation grill - remove it first.

Do not use excessive force - in 90% of cases the lampshade can be removed without tools!

What to do if the base remains in cartridge?

Action algorithm:

1. Unplug the refrigerator.
2. Wear gloves and safety glasses.
3. Use insulated pliers, carefully unscrew the base counterclockwise.
4. If the base does not give in, remove the cartridge and push it out from the back.

If you are afraid of damaging the cartridge, call a specialist - the cost of replacing the cartridge (~500 rubles) is lower than the risk of a short circuit.

You can Is it possible to replace the lamp without turning off the refrigerator?

No! Even if the lamp is 12 V, the risk of electric shock or short circuit remains. In addition:

• 🔌 When the power is on, the door switch can trip at any time.
• 🔌 If you mix up the wires, you can burn the control unit.

Turning off the refrigerator for 5-10 minutes will not harm the food, but will protect you from injury.