We independently change the direction of opening the door of the refrigerator Samsung: instructions with photos and videos

Reversing the refrigerator door Samsung to the opposite side is a task that owners face when moving, renovating a kitchen, or simply wanting to optimize space. The manufacturer provides this option for most models, but the process requires accuracy and knowledge of key nuances. Unlike interior doors, it is important not only the mechanical movement of the hinge, but also the correct reinstallation shock absorbers, seal and sometimes even electronic sensors.

In this article you will find step-by-step instructions with taking into account the features of refrigerators Samsung of different series - from budget RB and RT to premium Family Hub. We will look at what tools are needed, how to avoid damage gas circuit (this is critical!), and what to do if the door does not fit well after rehanging. And for a visual understanding of the process, we will attach diagrams and photographs of the key stages.

Preparation: tools and working conditions

Before you begin, make sure that you have everything you need. For most models Samsung a standard set is sufficient, but some series (for example, Samsung RF23 or RS68) may require specific keys.

• 🔧 Screwdrivers: cross (PH2) and flat (3-5 mm) - for dismantling the hinge and fasteners.
• 🔨 Wrench: usually 10 or 12 mm (size depends on the model).
• 📏 Ruler or square: to align the door after installation.
• 🧴 Silicone grease: for processing the seal (optional, but recommended).
• 📦 Cardboard or soft cloth: to avoid scratching the refrigerator body when installing the door.

Important: if your refrigerator equipped water/ice dispenser (series RS, RF), additional reinstallation of the supply tubes will be required. In this case, it is better to prepare in advance plastic clamps and sealant for connections.

⚠️ Attention: Some models Samsung with the system No Frost have hidden shock absorber mounts under the decorative panels. If you do not remove them before rehanging, you can damage the soft closing mechanism.

Step 1: Disabling the refrigerator and dismantling the door

The first stage is to ensure safety and access to the fasteners. Start with full power off: remove the plug from the socket and wait until the interior light goes out (this will confirm that there is no voltage). If the refrigerator is connected to a water supply (models with Ice Maker), turn off the water supply tap.

Next:

1. Remove all products from the door shelves and from the main compartment.
2. Remove the magnetic seals (if they are removable) or carefully bend them so as not to damage them.
3. Ask an assistant to support the door - it is heavier than it seems!
4. Unscrew top hinge (usually 2-3 bolts with a Phillips screwdriver).
5. Lift the door up to remove it from the bottom hinge. In some models (for example, Samsung RL), the lower hinge is fixed with an additional bolt - this also needs to be unscrewed.

Tip: if the door is “jammed” and cannot be removed, check if it is in the way. shock absorber. It may need to be disconnected from the body first.

Step 2: Transfer the hinges to the opposite side

Now you need to rearrange the fasteners loops There is an important nuance here: the holes for the hinges on the opposite side are usually closed. They need to be carefully pryed off with a flat screwdriver and removed. Samsung the hinge holes on the opposite side are usually closed decorative plugs. They need to be carefully pryed off with a flat screwdriver and removed.

Transfer instructions:

1. Remove the plugs from the other side of the case (save them - they will be needed for the old mounting location).
2. Move top hinge to the opposite side, screwing the bolts into the free holes. Do not tighten them completely - first you need to align the door.
3. Install lower loop. In models with Total No Frost (for example, Samsung RB37), the lower loop can be attached through metal plate —it also needs to be moved.
4. If there is one on the door bracket for the shock absorber, remove it and secure it in a mirror way.

Critical point: in refrigerators Samsung with electronic control (series Family Hub) the display power cable can run inside the loop. It cannot be bent or pulled - just carefully transfer it to a new hole.

Step 3: Door installation and adjustment

When the hinges are moved, you can install the door in a new location. This stage requires precision:

1. Place the door onto bottom hingeholding it by the top edge.
2. Align the door vertically - it should stand strictly perpendicular to the body. Use a square or level.
3. Secure top hingebut do not fully tighten the bolts.
4. Check how the door opens and closes. If it opens on its own or closes with force, adjust the position of the hinges.

To adjust:

• If door sags - tighten the bolts on the top hinge.
• If the door touches body - loosen the bottom hinge and move the door closer to you.
• If the seal does not fit tightly check whether the door is skewed diagonally.

Step 4: Transfer of shock absorbers and additional elements

In refrigerators Samsung shock absorbers (springs or gas stops) are responsible for smooth closing. They need to be moved to the other side, otherwise the door will slam or not close completely.

How to do this:

1. Find the shock absorber mounts on the door and body (usually they are hidden under plastic covers).
2. Disconnect the shock absorber from the door, then from the body. In some models, it is attached to latches - they need to be pressed out with a screwdriver.
3. Move the fasteners to the opposite side (the holes are already provided by the manufacturer).
4. Install the shock absorber in a mirror image, check its operation: the door should close smoothly, without jerking.

For models with Ice Maker or Water Dispenser:

• 💧 Move the water supply tubes, making sure that they do not bend.
• 🔌 Check the connection of the door opening sensor (if any) - its cable should be free pass in a new position.

⚠️ Attention: In refrigerators Samsung with a system Twin Cooling Plus (two independent cooling zones) air ducts may pass inside the door. When rehanging, make sure that they are not pinched - otherwise air circulation will be disrupted.

Step 5: Checking the tightness and final settings

After installing the door, you need to make sure that it is fits tightly to the body. To do this:

1. Plug in the refrigerator and wait until it reaches operating temperature (1-2 hours).
2. Check the seal around the entire perimeter: take a sheet of paper, close the door and try to pull it out. If the sheet it comes out easily the seal needs to be adjusted.
3. Inspect the door for distortions. If the gaps are uneven, tighten the hinges.

Frequent problems after rehanging and their solutions:

• 🔊 The refrigerator hums more strongly —check whether the door is touching the body. Vibration can be transmitted to the hinges.
• ❄️ Ice freezes on the seal - which means there are cracks. You need to bend the seal or adjust the door.
• 🚪 The door does not close completely - perhaps the shock absorber is in the way. Check its fastening.

Features for different Samsung series

Not all refrigerators Samsung weigh the same. Here are the key differences:

Samsung RB/RT models (budget)

In these refrigerators, the hinges are secured with 4 bolts without additional fasteners. The main thing is not to lose the plastic plugs during transfer. There is only one shock absorber, located at the bottom of the door.

Samsung RF models with a dispenser

Careful reinstallation of the water supply tubes is required. The display's power cable runs through the top loop; it should not be kinked. It is recommended to photograph the initial position of the fasteners.

For models Side-by-Side (for example, Samsung RS68):

• 🔄 It is necessary to reweigh both doors the refrigeration and freezer compartments.
• ⚖️ After installation, check the synchronization of closing - the doors should not interfere with each other.
• 🔧 You may need to move touch control panel (in models with a display on the door).

For Family Hub:

• 📺 The screen on the door is connected by cable to the main unit. When rehanging it, you need to carefully move it into a new groove.
• 🔌 Before work, turn off the function SmartThingsto avoid malfunctions of the display.

⚠️ Attention: In refrigerators Samsung with the function Auto Open Door (automatic opening) after rehanging, you may need reset. settings through the menu, otherwise the sensor will not work correctly.

Common mistakes and how to avoid them

Even with careful work, you can make mistakes that will lead to breakdown. Here are the most common ones:

1. Tightening the hinge bolts. This leads to deformation of the door or breakage of the thread. Tighten the bolts crosswise without applying excessive force. effort.
2. Ignoring shock absorbers. Without moving the stops, the door will slam, which will damage the hinges over time.
3. Damage to the seal. If it is bent or torn, the tightness will be disrupted and the refrigerator will not work efficiently.
4. Improper laying of cables. In models with a display or sensors, a pinched cable can damage the electronics.

How to avoid problems:

• 📸 Take photographs of the initial position all fasteners before dismantling.
• 🔄 Check the operation of the door after each stage, and not just at the end.
• 🛠️ Use a torque wrench (if any) so as not to tighten the bolts.

FAQ: Answers to popular questions

Is it possible to hang the door of a Samsung refrigerator yourself if you have no experience?

Yes, but only if you are confident in your abilities and carefully follow the instructions For models with. with a dispenser or an electronic display, it is better to invite a specialist - there are more nuances with cables and tubes. Start with simple models (RB/RT), if you have never done this before.

How long does it take to rehang the door?

On average - from 1 to 3 hours, depending on the model. The most time is spent on adjustment and checking. tightness. If the refrigerator is with Ice Maker, add another 30-60 minutes to work with the tubes.

Do you need to defrost the refrigerator before rehanging?

Be sure to turn off the refrigerator 6-12 hours before work so that the ice melts. and will prevent damage to the seal. The exception is models with No Frost, but it is better to defrost them for safety.

What to do if the door does not close after rehanging?

Most likely, the problem is one of three:

1. Incorrectly adjusted hinges - loosen the bolts and level the door.
2. The shock absorber is installed crookedly - check its fastening.
3. The seal is dirty or deformed - clean it with soapy water or replace it.

If all else fails, the door body may have become skewed during installation - in In this case, you need a specialist.

Is it possible to re-hang the door on a Samsung refrigerator with the No Frost system?

Yes, but with caution. In such models, air ducts may run inside the door to circulate cold air. When re-hanging, make sure that they are not pinched or damaged. Also check that the new position of the door does not block the ventilation holes in the main one. camera.