How to correctly change the temperature in the Indesit refrigerator: instructions for all models

Adjusting the temperature in the refrigerator Indesit is a seemingly simple task, but incorrect settings can lead to food spoilage, increased energy consumption, or even compressor breakdown. In this article we will look at all the ways to change the temperature regime for models with mechanical and electronic control, talk about factory recommendations and typical user errors.

Many owners refrigerators Indesit are faced with a dilemma: set the temperature lower to keep food longer, or raise it to save energy. However, the optimal mode depends not only on your preferences, but also on climate class the device, camera load, and even the time of year. For example, in hot weather, a refrigerator needs more power to maintain the set parameters, and in winter, on an unheated balcony, too low a temperature can damage the equipment.

We analyzed the instructions for popular series Indesit (including C 132 G, B 18 FNF, TLAA 10 and others) and systematized the information so that so that even a beginner can figure it out without calling a specialist. If your model is not mentioned in the article, don’t worry: the setup principles for most refrigerators Indesit are similar, only the location of the buttons and displays differ.

1. How to determine the type of control in your refrigerator

Before changing the temperature, you need to understand what control is used in your model. The algorithm of actions depends on this. Refrigerators Indesit are divided into three categories:

• 🔘 Mechanical control — adjustment using a rotary switch (more often found in budget and older models, for example, Indesit ST 167).
• 📟 Electronic control with display — adjustment using buttons or touch keys (series Indesit EWD, BIAA 13).
• 🔄 Combined control —separate controls for the refrigerator and freezer compartments (for example, Indesit ITF 118).

To find out the type of control, inspect the inside panel of the refrigerator:

1. Open the refrigerator door cameras.
2. Look at the top or side wall inside - the control unit is usually located there.
3. If you see a knob with numbers (from 1 to 5/7) - this is mechanics. If there is a screen and buttons - electronics.

In models with No Frost (for example, Indesit DF 4180 W) control is almost always electronic, since the system requires precise adjustment for the correct operation of the fans. But in refrigerators with drip defrosting (Indesit TS 105) mechanics are more common.

2. Optimal temperature conditions for Indesit

The manufacturer recommends maintaining the temperature in the refrigerator compartment. from +2°C to +5°C, and in the freezer - from -18°C to -24°C. However, these values can be adjusted depending on several factors:

• 🥩 Type of products: for meat and fish is optimal +1...+2°C, for fruits and vegetables - +4...+5°C.
• ❄️ Camera load: if the refrigerator is full to capacity, set the temperature 1-2°C lower than standard.
• 🌡️ External temperature: in the heat of summer (+30°C and above) increase the cooling power by 1–2 notches.
• 🏠 Climate class: class models SN-T (for example, Indesit EWT 81051) are designed to operate at +10...+43°C, and class N —only at +16...+32°C.

Critical: in the freezer, temperatures below -24°C lead to overload of the compressor and increase in energy consumption by 15–20%. If you do not store food for longer than 3 months, -18°C is enough.

⚠️ Attention: If your refrigerator Indesit is set to Super Cool or Fast Freeze, it automatically lowers the temperature by 2-3 hours for quick cooling of new products. Do not forget to turn off this function after use!

3. How to change the temperature in a refrigerator with mechanical control

Mechanical regulators are found in models Indesit economy segment (for example, Indesit BS 101, Indesit ST 167). They are a rotary knob with numbers from 1 to 5 (less often up to 7), where:

• 1 is the highest temperature (minimum cooling).
• 5 is the lowest temperature (maximum cooling).

To change settings:

1. Find the regulator inside the refrigerator compartment (usually on the top panel or on the right).
2. Turn the knob clockwise to to decrease the temperature, counterclockwise to increase.
3. Wait 6–8 hours for the temperature to stabilize.
4. Check the result with a thermometer (put it in a glass of water on the middle shelf).

In two-chamber models (for example, Indesit BI 16) it may be two separate regulators - for the refrigerator and freezer compartments. The freezer compartment is usually adjusted in the same way, but with a range from 1 (warmer) to 4–5 (colder).

⚠️ Attention: If after changing the settings the refrigerator Indesit does not cool or, conversely, too much freezes, check the sealing rubber on the door. Its damage is one of the most common causes of temperature failures.

4. Setting the temperature in electronically controlled refrigerators

Electronic control panels are installed in modern models Indesit (series EWD, BIAA, DF). Here the temperature is changed using buttons or a sensor, and the current values are displayed on the display. Let's consider the process using the example of a popular model Indesit DF 4180 W:

1. Press the button Menu (or Set in some models). data-i="154">Use the buttons
2. Using buttons +/– or arrows to select the section Temperature (can be designated as Fridge Temp for the refrigerator compartment and Freezer Temp for the freezer).
3. Set the desired value (steps are usually 1°C).
4. Confirm the selection with the button OK or wait for automatic saving (depending on the model).
5. Exit the menu by pressing Menu or Exit.

In some models (for example, Indesit EWT 81051) the temperature can be changed directly using the Fridge and Freezer buttons without entering the menu. The display will show the current and new values.

What to do if the buttons do not respond?

If the electronic panel does not respond to presses, try unplugging the refrigerator for 10-15 minutes, then turn it on again. If the problem persists, the control module may be faulty - diagnostics by a service center will be required.

For models with a system No Frost (for example, Indesit ITF 118) after a temperature change, forced ventilation may start - this is normal. Do not be alarmed by the noise of the fans for 10–15 minutes.

5. Features of the settings in Indesit refrigerators with the No Frost system

Refrigerators Indesit with technology No Frost (for example, Indesit DF 5200 S, Indesit ITF 118) require a more careful approach to setting the temperature. In them, cooling is carried out due to the circulation of cold air, so it is important:

• 🌀 Do not block the ventilation openings with food.
• 📉 Avoid sudden changes in temperature (for example, from -18°C to -24°C at a time).
• 🔄 Regularly defrost the freezer compartment (despite No Frost, ice can accumulate on the evaporator).

In models with Full No Frost (cooling of both chambers without frost), the temperature in the refrigerator compartment is regulated in the range +1°C…+7°C, and in the freezer - -16°C…-26°C. Optimal values for such refrigerators:

• Refrigerator compartment: +3…+4°C (for uniform cooling of all shelves).
• Freezer compartment: -18°C (enough for most products).

If in yours refrigerator Indesit has a function Holiday (for example, in Indesit BIWM 24), its activation automatically sets the temperature in the refrigerator compartment at +12…+15°C - this saves energy when you leave for a long time, but leave the refrigerator on.

6. Common mistakes when setting the temperature

Even experienced users sometimes make mistakes that lead to food damage or breakdowns. Here are the most common of them:

• ❄️ Too low a temperature in the freezer (below -24°C) - increases the load on the compressor and energy consumption without real benefit.
• 🔥 The temperature in the refrigerator compartment is too high (above +5°C) - reduces the shelf life of perishable foods.
• 🔄 Frequent settings changes —the compressor does not have time to adapt, which leads to its wear.
• 🚪 Prolonged opening of doors —the temperature rises by 3–5°C in 1–2 minutes, and recovery takes up to hours.
• 🍲 Storing hot foods - upsets the thermal balance and forces the refrigerator to work at its limit.

Another typical problem is ignoring climate class. For example, if a refrigerator of class N (designed for +16...+32°C) is installed in an unheated room in winter, it may not turn on or, conversely, work without stopping. In this case, installation winter kit will help (for example, for models Indesit ST).

⚠️ Attention: If, after changing the temperature, the refrigerator Indesit makes uncharacteristic sounds (knocking, grinding, constant hum), immediately return the previous settings and check:

• Is the refrigerator level (misalignment can cause vibration of the compressor).
• Is the back wall touching the furniture or the wall (the distance must be at least 5 cm).
• Are there any strangers objects near the ventilation grilles (for models with No Frost).

7. How to reset the temperature settings to factory settings

If you experimented with the modes and want to return the standard settings, perform a reset. The method depends on the model:

• 🔄 Mechanical control: turn the knob to position 3 (middle scale) - this is the factory setting for most models Indesit.
• 📟 Electronic control:
  1. Press the button Menu (or Set) for 5-10 seconds.
  2. In some models (for example, Indesit EWT 81051), you need to go to Settings → Reset.
  3. Confirm the reset (if required).

After the reset, the temperature in the refrigerator compartment will be set to +4°C, in the freezer - to -18°C. If the reset did not help (the settings have not changed), check:

• If the mode is activated Super Freeze or Holiday.
• If there are any errors on the display (for example, F05, F11 —they can block the temperature change).
• Is the temperature sensor working (if it breaks, the refrigerator can ignore commands).

8. Additional functions that affect temperature

Modern refrigerators Indesit are equipped with functions that indirectly or directly change the temperature. Let's consider the most useful of them:

Function	Description	When use
Super Cool	Quick cooling of the refrigerator compartment to +2°C	After loading a large number of products
Fast Freeze	Intensive freezing in the freezer (-24°C)	When adding new products to the freezer
Holiday	Increasing the temperature in the refrigerator compartment to +12°C	During long absence (vacation, business trip)
Eco	Energy saving mode (temperature increases by 1–2°C)	At night or at low temperatures load

To activate these modes:

1. On models with electronic control, press the corresponding button (for example, Super Cool).
2. On mechanical refrigerators, these functions are usually absent or are activated by a separate toggle switch.
3. The mode operates for a limited time (usually 2-6 hours), then automatically turns off.

Function Holiday is especially useful if you are leaving for 1-2 weeks. It prevents the formation of mold and unpleasant odors with minimal energy consumption. However, do not forget before leaving:

• 🧊 Remove all perishable foods.
• 🧽 Clean the refrigerator from crumbs and spilled liquids.
• 🔌 Leave the freezer door slightly open (if the refrigerator is empty) to avoid condensation.

FAQ: Frequently asked questions about setting the temperature in Indesit

Is it possible to set different temperatures on different shelves?

No, in refrigerators Indesit the temperature is regulated uniformly for the entire chamber. However, due to physical laws, the upper shelves are usually 1-2°C warmer than the lower ones. If you need different storage areas, place products accordingly:

• 🥩 Meat/fish - bottom shelf (coldest place).
• 🥛 Dairy products - middle shelf.
• 🍎 Fruits/vegetables - drawers at the bottom.

Why did the refrigerator become louder after changing the temperature work?

This is normal: when the temperature drops, the compressor turns on for a longer time, and in models with No Frost the fan is activated. The noise should decrease after 1-2 hours, when the mode stabilizes. If the hum does not last longer than a day, check:

• Is the freezer compartment overloaded (food may be blocked). air circulation).
• Is there vibration due to an uneven floor?
• Is the fan working properly (in models with No Frost).

What temperature should be in the freshness zone (if any)?

Freshness zone (or "zero chamber") in refrigerators Indesit (for example, Indesit BIWM 24) maintains a temperature of about 0…+1°C. This mode is ideal for:

• 🥩 Fresh meat (stored up to 3 days without freezing).
• 🐟 Fish and seafood.
• 🧀 Soft cheeses.
• 🥬 Greens and berries.

In most models, the temperature in the freshness zone is not regulated separately - it depends on the general mode of the refrigeration chamber.

What to do if the temperature is refrigerator does not correspond to the installed one?

If you have set it to +4°C, and the thermometer shows +8°C (or vice versa), check:

1. The door is closed tightly - the sealing rubber should fit without gaps.
2. Is the chamber overloaded with products (especially in freezer).
3. The serviceability of the temperature sensor (in electronic models).
4. Is the mode activated Eco or Holiday.

If the problem persists, malfunctions are possible:

• 🔧 Freon leak (refill required).
• 🔌 Failure of the thermostat or control module.
• ❄️ Clogged capillary tubes.

In these cases, repairs are needed at a service center.

Is it possible to turn off the Indesit refrigerator at night to save money?

No, you should not do this. The compressor's on/off cycles are designed for continuous operation. When disconnected:

• 🌡️ The temperature will rise to room temperature in 2-3 hours.
• 💧 Condensation forms, which can lead to corrosion.
• 🦠 Bacteria develop (especially if there is food left in the refrigerator).

To save energy, it is better:

• 🔄 Use the mode Eco (if available).
• 🧊 Do not open the door unless necessary.
• 🌙 Do not load warm items at night products.