How to wash a Beko refrigerator: complete instructions from preparation to drying

Refrigerator Beko is a reliable assistant in the kitchen, but even the most modern equipment requires regular maintenance. Washing the internal surfaces and external casing not only maintains hygiene, but also extends the life of the unit. However, improper cleaning can damage the seal, create an unpleasant odor, or even cause compressor failure. In this article, we will analyze how to safely wash a Beko refrigerator taking into account the features of its design, what products to use for different materials (plastic, glass, stainless steel), and give advice on eliminating persistent stains.

Features of refrigerators Beko - in their system No Frost (in most modern models) and the specific location of the drainage hole. This means that when washing, you cannot pour water into the evaporator tray, and the rubber seals require delicate handling. We will describe in detail each stage - from turning off the power to final drying - and also tell you the mistakes that even experienced housewives make. how to avoid common mistakes, which even experienced housewives admit.

Preparing the Beko refrigerator for washing: what needs to be done before cleaning

The first step is proper preparation. You can’t just take a rag and start rubbing the walls: this can cause a short circuit or damage the electronics. Here's what you need to do in advance:

• 🔌 Turn off the power. Unplug the plug from the socket or turn off the circuit breaker on the panel. In models with a display (for example Beko GNE114620X), after switching off, residual voltage may remain - wait until the screen turns off completely.
• ❄️ Defrost the refrigeratorif there is ice in it. In models with No Frost defrosting takes 2–4 hours, in drip systems - up to 8 hours. Do not use a hairdryer or hot water to speed up the process!
• 📦 Take out all the products. Place them in a cooler bag or bowl of ice. If it’s winter outside, you can take it out to the balcony (at a temperature no higher than +5°C).
• 🧊 Remove the removable elements: shelves, containers, grates. They are washed separately in warm water. Glass shelves Beko (for example, in the model Beko CNK335120) can be washed in the dishwasher at temperatures up to 50°C.

Pay attention to drainage hole —it is located on the back wall of the refrigerator compartment. In models Beko it is often closed with a special plug. Do not try to clean it with sharp objects: use only a soft brush or cotton swab. If dirt has accumulated in the hole, this can lead to blockages and an unpleasant odor.

What products can be used to clean the Beko refrigerator

The choice of detergent depends on the material of the surfaces of your refrigerator. In models Beko there are:

• 🟨 Plastic (chamber walls, door shelves) - sensitive to abrasives and aggressive chemicals.
• 🥛 Glass (shelves, some door models) - resistant to most products, but may fade from chlorine.
• ⚪ Stainless steel (external body of premium models, for example, Beko RCSG518M50S) - requires special polishes.

Safe options for internal cleaning:

Never use chlorine products (such as "White"), abrasive powders or metal brushes to clean the Beko refrigerator - this will damage the antibacterial coating and sealing rubber bands. For the outer stainless steel case, special polishes are suitable (for example, Electrolux Stainless Steel Cleaner), which prevent the appearance of stains and fingerprints.

Step-by-step instructions: how to wash the inside of a Beko refrigerator

Start from the top shelves and gradually go down. So dirt and drops of detergent will not flow onto already washed surfaces. Here is a detailed one. algorithm:

1. Wipe the ceiling of the chamber with a soft sponge soaked in a soapy solution. In models Beko condensation often accumulates here, which can become a source of mold.
2. Clean the walls with vertical movements. grease and crumbs accumulate there. For hard-to-reach places, use cotton swabs.
3. Rinse. shelves and containers separately in the sink. Glass shelves can be soaked in warm water and soda for 15 minutes if there are dried stains on them.
4. Treat the seal. rubber band. Wipe it with a solution of vinegar (1:1 with water) - this will prevent the appearance of black mold. In models Beko the seal is often removable: if it is deformed, it can be removed and soaked in warm water.
5. Clean the drainage hole. Use a special brush (included with some models) or a cotton swab soaked in alcohol.
6. Wash the condensate tray (located at the back of the refrigerator In models with No Frost it is hidden behind). panel - carefully remove it following the instructions.

Turn off the power and defrost|Remove all products and removable elements|Wipe the ceiling and walls|Wash the shelves and containers separately|Clean the seal and drainage|Dry all surfaces-->

To clean the back wall of the refrigerator compartment in models with a drip system (Beko CS 310120 S), use a soft cloth soaked in a soda solution. Do not press on the wall - refrigerants pass behind it. If there is ice on the back wall of the freezer compartment (No Frost), do not break it off with a knife: wait for complete defrosting or use a plastic scraper.

How to wash the outside of a Beko refrigerator: nuances for different coatings

External care is no less important than internal. Dust on the radiator (rear grille) worsens heat transfer and makes the compressor work harder, which increases energy consumption. And fingerprints on glossy surfaces spoil the appearance. Let's look at how to properly care for different types of external coatings:

• 🔳 Glossy surface (models Beko GNE V331X): Use a microfiber cloth and alcohol-free glass cleaner. Movements should be vertical - this way there will be fewer streaks.
• 🔄 Stainless steel (series Beko ProSmart Inverter): wipe along the “fibers” of the metal with a special napkin. To remove greasy stains, a vinegar solution (1:3 with water) is suitable.
• 🖼️ Plastic case (budget models): can be washed with soapy water, but avoid products with acetone - they can cause yellowing.
• 🌀 Radiator grille (rear): clean with a vacuum cleaner with a narrow nozzle or a soft brush. Do not use water - this may lead to corrosion.

Pay special attention door handle. In models with a hidden handle (Beko BCD 125), dirt accumulates in the grooves - clean them with a cotton swab dipped in alcohol. Antibacterial wipes can be used for disinfection. Don't forget about top panel of the refrigerator —dust and grease from kitchen fumes often accumulate there.

How to remove scratches on a glossy case?

Small scratches (up to 0.5 mm deep) can be masked with a special pencil for plastic (for example Edding 8500>). For deep damage, use car polishing paste (apply in a circular motion with a microfiber cloth).

Cleaning the freezer: features for Beko models with No Frost

The freezer requires a special approach, especially if your Beko equipped with a system No Frost. Unlike drip models, you can’t just wipe the walls - you need to take into account several nuances:

1. Do not use hot water to speed up defrosting. Sudden temperature changes can damage plastic parts. In models Beko with the function Fast Freezing (quick freezing), after washing you will need to activate this mode again.
2. Clean the ventilation holes with a soft brush. In systems No Frost they are located on the back wall and can become clogged with dust, which impairs air circulation.
3. Check the condition of the ice maker (if your model has one, for example Beko RCSG520M50S). Wipe it with a solution of citric acid (1 teaspoon per glass of water) to remove scale.
4. Do not forget about the freezer seal. It is often wider than the refrigerator compartment and requires more thorough cleaning. In models Beko the freezer seal sometimes has a magnetic insert - do not pull on it when washing.

If unpleasant odorappears in the freezer, the cause may be be:

• 🍖 Products with a strong aroma (fish, onions, garlic) - store them in airtight containers.
• 🧊 Stale water in the drainage system - clean the hole and rinse the pan.
• 🦠 Bacteria on the walls - treat the surfaces with a solution of soda with the addition of 2-3 drops of tea tree essential oil.

How to properly dry a Beko refrigerator after washing

Improper drying can negate all cleaning efforts. Damp surfaces are an ideal environment for bacteria to grow and mold to grow. Models Beko have several “traps” for moisture that you need to pay attention to:

• 💧 Sealing rubber bands — dry them with a hairdryer at minimum power (keep at a distance of 20 cm) or blot with paper towels.
• 🔽 Drain hole —after cleaning, dry it with a cotton swab to avoid clogging.
• 🧊 Rear wall of the freezer —in systems No Frost condensation may remain here. Wipe it with a dry cloth.
• 📦 Plastic containers — air dry them or wipe them with paper napkins. Moisture underneath can become a source of unpleasant odor.

The optimal drying time is 1-2 hours at room temperature. You can speed up the process by leaving the doors open and pointing a fan at the refrigerator (but not at full power, so as not to deform the plastic). In models with the function Air Flow (for example, Beko RCSK 310M20 S), you can turn on the air circulation for 10-15 minutes to remove residual moisture.

⚠️ Attention: Do not turn on the refrigerator immediately after washing if there is moisture left on the walls. In models Beko with electronic control, this can lead to a short circuit in the control unit. Wait for it to dry completely (check the back wall of the refrigerator by touch).

Common mistakes when washing a Beko refrigerator and how to avoid them

Even experienced users sometimes make mistakes that can lead to damage or shorten the life of the refrigerator. Here are the most common of them and ways to prevent them:

Another typical mistake is incorrect assembly after washing. For example, if a glass shelf is not inserted tightly into the grooves, it may crack when the door is closed. In models Beko with a system DoorCool+ (uniform distribution of cold air across the door), it is important to install all elements correctly, otherwise circulation will be disrupted.

⚠️ Attention: If after washing the refrigerator Beko began to work louder or an uncharacteristic noise appears (for example, gurgling), check whether water has entered the drainage system. In this case, turn off the unit and let it stand turned off for 12–24 hours to dry completely.

FAQ: Answers to frequently asked questions about washing a Beko refrigerator

Is it possible to wash a Beko refrigerator steam generator?

Use of a steam generator is possible, but with caution. On electronically controlled models (eg Beko RCSKG 520M50S), steam may damage the display or touch buttons. If you do decide to use steam, keep the nozzle at a distance of 30 cm from surfaces and avoid directing the stream at:

• 🔌 Electronic control panel;
• 🔄 Ventilation holes No Frost;
• 🧲 Sealing rubber bands (hot steam can damage them deform).

After steam treatment, be sure to wipe all surfaces with a dry cloth.

How often should you wash the Beko refrigerator?

The recommended frequency of washing depends on the intensity of use:

• 📅 once a month - if the refrigerator is 70% loaded with food and more;
• 📅 once every 3 months —with moderate use (load up to 50%);
• 📅 1 time every 6 months —if the refrigerator is rarely used (for example, in the country).

It is enough to wash the freezer 1-2 times a year, if it is not overloaded with food. The exception is models with an ice maker: they need to be cleaned every 2 months.

How to wash yellow stains on the plastic of a Beko refrigerator?

Yellow stains on plastic parts (especially in older models) appear due to oxidation or exposure to fat. You can remove them in the following ways:

1. Hydrogen peroxide 3% - apply to the stain for 10 minutes, then wipe with a damp sponge.
2. Toothpaste (white, without granules) - apply to the stain, rub with a soft brush, rinse.
3. Special bleaches for plastic (for example, Retrobright), but they require caution - test on an inconspicuous area.

If stains are not removed, the plastic may have faded over time. In this case, only replacing the part will help (at the service center Beko).

Do you need to wash the new Beko refrigerator before first use?

Yes, required. At the factory and during transportation, the following may remain on the surfaces:

• 🏭 Technical oils (from equipment);
• 🚛 Dust and dirt (from packaging and transportation);
• 🦠 Bacteria (if the refrigerator was stored in a warehouse in non-sterile conditions).

For the first wash, just wipe all surfaces inside and outside with a damp cloth with a soapy solution, then dry. Do not use aggressive products - they can damage the factory antibacterial coating.

How to remove the smell of plastic in a new Beko refrigerator?

The smell of new plastic (the so-called “factories smell”) is a normal phenomenon that disappears after 1-2 weeks. To speed up the process:

1. Wash all removable elements (shelves, containers) in a soda solution (1 tbsp per 1 liter of water).
2. Wipe the internal surfaces with a rag soaked in water and vinegar (1:3).
3. Place an open pack of soda inside the refrigerator, activated carbon or citrus peels for 2-3 days.
4. Turn the refrigerator on Super Cool (if available) for 12 hours - intense air circulation will help remove the smell.

Do not use fragrances with strong fragrances - they can be absorbed into the plastic and mixed with factory smell.