Correct organization of the internal space of the refrigerator Atlant directly affects the shelf life of products and the efficiency of the compressor. Many users encounter difficulties when reinstalling glass shelves, especially after general cleaning or defrosting the chamber. Installation errors can lead to the glass not fitting tightly, wobbly, or even cracking under the weight of the contents.
In two-chamber models of the Belarusian brand, the fastening system has its own characteristics that must be taken into account. The design of the guides is designed for certain loads and types of containers. Understanding the principle of operation fasteners and grooves will help avoid damage and ensure a stable position of cans and pans.
Before installation, you should carefully inspect the inner chamber for chips or ice residues. Even slight frost on the bottom of the groove can cause the glass surface to warp. This is especially true for systems No Frostwhere air circulation requires free space around the shelves.
⚠️ Attention: Before installation, make sure that the refrigerator is unplugged if you are doing wet cleaning. Water getting on electrical contacts when installing wet shelves is unacceptable.
Modern models Atlant are often equipped with height-adjustable guides. This allows you to adapt the internal space to accommodate larger products. However, the adjustment mechanism requires careful handling so as not to break the plastic holders.
Types of fastenings and design features of Atlant models
Refrigerators Atlant of the two-chamber type are available in various modifications, and the shelf fastening systems in them may differ. The main emphasis is on reliability and ease of operation. Most often, there are models with metal or plastic guides mounted in the back wall and side panels.
It is important to distinguish between the types of supports, since the installation method depends on this. Older models often use simple metal rods that are inserted into holes. New series are equipped with more complex ones plastic stopsthat prevent accidental glass falling out when opening the door.
- 🔹 Metal pins are a classic option that requires precise placement into the holes on the back wall.
- 🔹 Plastic rails - provide a smoother ride and have built-in stops for fixing the position.
- 🔹 Combined system - the front part rests on the door ledges or special slides, and the back on the guide walls.
The glass used in these refrigerators is tempered and can withstand significant weight. However, its edges are vulnerable to pinpoint impacts. When installing, you need to ensure that the corners of the glass do not touch metal elements with force.
⚠️ Attention: The design of the guides may vary depending on the year of manufacture of the model. Always check the device data sheet if the standard installation method does not work.
Some premium models Atlant have a "Flexi Zone" system that allows you to fold part of the shelf. The folding mechanism requires special care during initial installation. Incorrect assembly of the hinges will result in the shelf not being fixed in a horizontal position.
Preparation for installation: cleaning and checking elements
Before installing the shelves, you must carefully prepare the work space. Food debris, crumbs, or sticky spots on the bottom of the grooves can cause the glass to lie unevenly. This will create a risk of liquid spills and unpleasant odors inside the camera.
Use a soft cloth and neutral detergent to clean the interior surfaces. Abrasive pads can scratch the plastic, making it difficult for shelves to slide in the future or causing stress cracks to form. Pay special attention to the corners of the camera.
- 🧼 Wipe all guides and pin holes with a damp cloth.
- ❄️ Make sure there is no ice or debris in the drainage holes under the shelves.
- 🔍 Check the integrity of the plastic stops for missing chips.
If you install the shelves after defrosting, make sure the chamber is completely dry. Moisture between the glass and the support can create a suction effect or, conversely, sliding, which is unsafe. Dry surfaces provide better hold.
Check the shelves themselves for defects. Even a microcrack at the end of tempered glass under load can lead to destruction of the entire structure. If the glass is chipped, its use is prohibited.
⚠️ Attention: Do not use hot water to defrost or wash glass shelves if they are cold. A sharp temperature change can cause thermal shock and destruction of the material.
Step-by-step instructions: installing glass shelves in the refrigerator compartment
The process of installing shelves in the refrigerator compartment of a two-chamber Atlanta requires a sequence of actions. First, the rear supports are installed, then the shelf is carefully lowered onto the front clamps. Failure to follow this procedure may result in pinched fingers or damage to the glass.
Grip the shelf by the short sides with both hands. Align the rear edge with the corresponding guides on the back of the camera. Slowly lower the glass until it rests on the supports. Make sure it fits tightly and does not wobble.
☑️ Installation checklist
Next you need to fix the front part. Depending on the model, the front edge is either inserted into special grooves on the body or rests on plastic protrusions. Some models require light pressure on the front edge until a characteristic click is heard.
If your model is equipped with a system fall limiters, make sure that they are raised into position after installing the glass. This will prevent heavy bottles from sliding off when the refrigerator door is suddenly opened.
For models with height-adjustable shelves, the process is similar, but requires preliminary installation of the support pins at the desired level. The pins should fit into the holes tightly, without play. If the pin is loose, select an adjacent hole or replace the element.
⚠️ Attention: When installing heavy weights, distribute them evenly over the entire surface of the shelf. Concentrating the weight in one corner can cause the glass to warp or break.
Installation of shelves and drawers in the freezer
The freezer compartment of a two-chamber refrigerator Atlant has its own characteristics. Here the shelves are often made of metal mesh or durable plastic; glass is less often used. The design is designed to operate at extremely low temperatures.
Installation of grid shelves in the freezer is usually done by inserting them into the side guides. Orientation is important: the front bead often has a bulge or handle that should face outward. By mixing up the sides, you can block access to the lower drawers.
- 🧊 Metal grilles are installed on plastic slides of the side walls.
- 📦 Plastic shelves-lids for drawers have special hooks for fixing.
- ❄️ The back wall of the freezer often has projections for additional support.
If a system is installed in the freezer, the shelves have special holes or gaps for the circulation of cold air. It is impossible to block these holes with foreign objects or incorrectly installed shelves - this will disrupt the temperature regime. No Frost, the shelves have special holes or gaps for cold air circulation. These openings cannot be blocked with foreign objects or incorrectly installed shelves - this will disrupt the temperature regime.
Lids of freezer drawers Atlantakh often serve as additional shelves. They are installed on the ends of the boxes. It is important that the lid lies flat on the drawer guides, otherwise it will not close hermetically, and the food will begin to freeze.
Why do the shelves in the freezer sweat?
If, after installing the shelf in the freezer, frost or ice forms on it, check the density door fit and seal integrity. Also, the reason may be a violation of air circulation due to incorrect position of the shelf.
Height adjustment and rearrangement of levels
One of the main advantages of two-chamber refrigerators Atlant is the ability to change the height of the shelves. This allows you to place tall pans, bottles or cakes inside. To rearrange it, you need to dismantle the shelf and change the position of the supports.
There are a number of holes on the side walls of the chamber. Remove the support pins (if they are removable) or move the plastic brackets to the desired level. In models with metal guide rails, the height is adjusted by rearranging the rails themselves or using additional grooves.
| Installation level | Recommended purpose | Load features |
|---|---|---|
| Upper level | Ready meals, drinks | Minimum load, protection from drops |
| Medium level | Dairy products, sausages | Medium load, easy access |
| Lower level | Heavy pots, watermelons | Maximum load capacity |
| Door shelf | Sauces, eggs, small packages | Dynamic load when opening |
When rearranging, make sure that the shelf does not block the ventilation holes if they are located on the rear wall. In systems Full No Frost this is critical for uniform cooling of the entire volume.
If you install a shelf on the lowest level above the vegetable drawers, make sure that it does not interfere with their extension. The gap between the shelf and the drawer should be sufficient for free air circulation.
⚠️ Attention: Do not try to force the shelf into place if it does not fit into the grooves. Check installation level and any obstructions. Excessive force will lead to breakage of the plastic.
Elimination: distortions, swaying and squeaks
After installation, users often notice that the shelf wobbles or makes sounds when the door is closed. This indicates improper installation or wear of the fastening elements. Ignoring the problem may result in food falling.
If the shelf is wobbly, check that all supports are firmly attached to the glass. Often one of the sides may not fully fit into the groove. Remove the shelf and reinstall it, paying attention to symmetry. In models with adjustable support legs on the glass itself, check their height.
- 🔊 Creaking when opening the door is eliminated by lubricating the rubbing plastic parts.
- 📉 Sagging glass indicates exceeding the permissible load or defective.
- 🔨 Knock when closing doors means that the shelf protrudes beyond the dimensions of the case.
In old refrigerators Atlant plastic becomes brittle over time. If you notice cracks in the plastic stoppers, they need to be replaced. Operation with damaged fasteners is dangerous.
Sometimes the cause of instability is the refrigerator body itself. If the unit is not level, the shelves may warp. Adjust the legs of the refrigerator using a building level before installing the shelves.
Frequently asked questions (FAQ)
Can Atlant glass shelves be washed in dishwasher?
Most glass refrigerator shelves Atlant are made of tempered glass, which theoretically can withstand high temperatures. However, manufacturers do not recommend washing them in the dishwasher due to harsh detergents that can damage the plastic edging or protective coating. It is better to wash by hand with warm water.
What is the maximum weight that one shelf can support?
A standard glass shelf in two-chamber refrigerators Atlant is designed for a uniform load of up to 30-40 kg. However, it is recommended not to exceed a weight of 20-25 kg to maintain a safety margin, especially if the shelf is installed at the maximum height or has defects.
What to do if a shelf breaks, where to buy a new one?
You need to find out the exact model of your refrigerator (indicated on the nameplate inside the chamber). Original spare parts can be ordered at authorized service centers Atlant or specialized spare parts stores. It is not recommended to buy universal shelves “by eye” due to the risk of mismatching sizes and fastenings.
Why does the shelf freeze to the wall of the refrigerator?
This can happen when there is high humidity in the chamber or a malfunction of the condensate drainage system. Freezing is also possible if the shelf is installed close to the back wall in models with direct freezing. Regular defrosting and checking the drainage hole will help solve the problem.
Is it possible to operate the refrigerator without one of the shelves?
Technically, the refrigerator will work without the shelves, but this will violate temperature zoning. Cold air will circulate chaotically, which can lead to freezing of food at the lower levels or insufficient cooling of the upper ones. In addition, the absence of shelves increases the volume of air that needs to be cooled, increasing energy consumption.