Modern brand refrigerators Atlant are distinguished by well-thought-out ergonomics of the internal space, however, independent installation or reinstallation of interior elements can cause difficulties for an inexperienced user. Often the need to move glass shelves or install additional tiers arises after general cleaning, replacing damaged parts, or purchasing a new model that requires adaptation to the dimensions of the dishes. Improper fixation can lead to the fall of heavy products, so it is critical to follow the installation technology provided by the manufacturer.
Unlike old Soviet units, where shelves were often simply inserted into grooves, the equipment Atlant uses various fastening systems, depending on the series and model of the device. Understanding how stops and guides work will allow you to avoid breaking fragile glass or deforming plastic elements. In this material, we will analyze in detail all the nuances of installation that will help you safely organize the internal space.
Types of fastening systems in different models
Before starting any manipulations, you must clearly identify the type of fastening system installed in your refrigerator. Engineers Atlant use several solutions to securely hold glass, and each of them has its own installation features. Confusion in the types of fasteners is the most common cause of defects during installation.
The most common option is a system with plastic stops, which are inserted into the perforations on the side walls of the chamber. Such limiters can be removable or non-removable, integrated into the housing design. In more budget or older models, there are simple metal or plastic guides along which the shelf is pushed all the way.
Models with a system Multi-Air Flow or similar air circulation technologies, where the shelves have special cutouts for the passage of flows, deserve special attention. It is important here not to confuse the top and bottom during installation, since the geometry of the glass is often asymmetrical. If you see a sticker with markings on the end of the glass, it should look up or out, depending on the specific series Atlant.
Preparation for installation and safety measures
The glass used in refrigerators Atlantis tempered and has high strength, but it extremely sensitive to pinpoint impacts on the end. Before handling the shelf, make sure your palms are dry and clean to prevent slipping. Any grease stains or moisture can cause a heavy structure to slip out of your hands at the most inopportune moment.
⚠️ Attention: Never try to install a glass shelf alone if it is large in size or weight. The risk of dropping glass on your feet or breaking it on the bottom of the refrigerator compartment is too great. Engage an assistant to fix the body or move the shelf.
It is also important to check the condition of the stops and seats themselves. If you are installing a shelf in place of a broken previous one, make sure that there are no splinters or cracks left in the grooves on the walls of the chamber. Deformed plastic may not withstand the load, so if defects are detected, it is better to order new components from official dealers Atlant.
☑️ Check before installation
Installing the shelf on plastic stops
This type of fastening is standard for most modern models Atlant. The installation process here requires care, but is technically simple. First, you need to install the limiters themselves in the holes on the side walls of the refrigerator at the required height.
Plastic clips have a characteristic shape that allows them to snap into the perforations. When installing, they need to be inserted at a slight angle, and then pressed until they click. Make sure that the stops on the left and right sides are at the same level, otherwise the shelf will be skewed, which can lead to it sliding or cracking of the glass over time.
After fixing the stops, grasp the glass shelf with both hands by the side edges. Carefully place it on top of the installed supports. The shelf should fit snugly against the stoppers around its entire perimeter. If the model has a back stop or a special groove for fixing it from sliding out, make sure that the glass fits into it.
Installation of shelves on pull-out guides
In some models Atlant, especially in series with a large refrigerator volume, metal or reinforced plastic guides are used. Such designs allow you to pull out the shelf for easy access to products stored in the depths. Installation here requires precise fit into the grooves.
First, check whether the guides themselves are installed on the walls. They are often a permanent part of the structure or are secured with screws, which requires the use of tools. If the guides are removable, insert them into the corresponding holes until they stop. Make sure that the sliding mechanism operates smoothly and does not jam.
The glass shelf for such a system usually has special holes or recesses on the sides. It must be installed strictly horizontally, lowered onto the guides. It is important not to use excessive force: if the shelf does not fit, check the correct orientation and alignment of the fasteners. After installation, try to smoothly slide the shelf out and in to make sure it is securely fixed.
| System type | Support material | Installation complexity | Risk of displacement |
|---|---|---|---|
| Plastic limiters | ABS plastic | Low | Medium (when skewed) |
| Metal guides | Steel/Aluminium | Medium | Low |
| Fixed sides | Plastic body | Minimum | Absent |
| Combined system | Metal and plastic | High | Low |
Height adjustment and rearrangement of tiers
One of the main advantages refrigerators Atlant is the possibility of flexible configuration of the internal space. You can change the height between the shelves to accommodate tall pots, bottles or cakes. To do this, it is enough to move the limiters to another row of holes.
Perforation on the internal walls of the refrigerator is usually made in the form of rows of holes located at different distances from each other. This allows you to vary the installation step. When rearranging, be sure to remove the glass shelf completely, change the height of the stops, and only then return the glass to its new location. An attempt to move the stops under load is prohibited.
Why does the shelf wobble after rearrangement?
If after rearrangement you notice play, check whether the plastic stops are completely latched. Often they do not fully fit into the groove due to dust or food debris that has gotten there. The reason may also be wear and tear of the plastic: over time, the latches wear out and hold less well. In this case, it is better to replace the limiters.
Remember that the maximum load on one shelf in refrigerators Atlant usually does not exceed 30-40 kg, but it is better not to test the structure for strength. Distribute the weight of food evenly. If you store heavy supplies, it is preferable to use the lower tiers, where the load on the structure is minimal and the center of gravity is closer to the bottom.
Features of installing glass inserts in boxes
Special attention is required to installing glass lids on plastic boxes for vegetables and fruits, which are also present in refrigerators Atlant. These elements are often confused with the main shelves, but they have their own mounting specifics. The glass here serves not only to separate zones, but also to maintain humidity in the vegetable compartment.
The glass insert usually rests on special protrusions inside the plastic box or on the front and back walls of the chamber if the box is removed completely. When installing, make sure that the glass rests on rubber or plastic shock absorbers, if provided by the design. This will prevent rattling when the compressor operates.
⚠️ Attention: It is strictly forbidden to use glass shelves from other models or manufacturers, even if they are visually suitable in size. Differences in glass thickness or tempering form may result in sudden failure of the material due to temperature changes.
Use warm water and mild detergents to clean removed glass elements. Do not use abrasive sponges, which may leave micro-scratches that weaken the glass structure. After washing, be sure to wipe the surface dry before installing it back in the refrigerator to avoid the formation of an ice crust.
Common installation errors
Even carefully reading the instructions does not always guarantee success the first time, especially if the user is in a hurry. One of the most common mistakes is trying to stuff a shelf into the refrigerator without removing the protective transport film. Although this seems obvious, in their haste, many people forget to remove the tape from the ends, which prevents a tight fit.
Another common problem is ignoring the level. If the refrigerator Atlant is not level and you install the shelves by eye, they may move out spontaneously when you open the door. Always check that the unit itself is level before installing the internal components. Adjusting the refrigerator legs will solve the tilt problem.
Also, users often forget about thermal expansion. Glass and plastic have different expansion coefficients. You should not try to “push” the shelf close to the back wall if the design provides a gap for air circulation. Violation of this rule can lead to fogging of food or even cracking of the glass when the material expands.
Is it possible to use a shelf from another Atlant refrigerator?
Using a shelf from another model is possible only if not only the overall dimensions are the same, but also the type of fastening system, the thickness of the glass and the location of the air cutouts. However, the manufacturer does not guarantee the safety of such operation. It is better to purchase an original spare part that corresponds to the specific serial number of your device.
What to do if the plastic limiter is broken?
Operating a shelf without one of the limiters is dangerous. You can temporarily use double-sided tape to secure it, but this is only a temporary solution. You must order a new set of limiters from a service center or spare parts store, indicating the model of the refrigerator. Universal limiters may not fit the profile.
Why does the shelf rattle when the refrigerator is running?
Rattling is most often caused by the glass not fitting tightly into the grooves or the lack of damper gaskets. Check that the contact points are clean. If the shelf is installed on the guides, the grease may have dried out or the fastening screw may have become loose. In some cases, placing a thin strip of food-grade silicone under the edge of the shelf helps.
How to clean the ends of the glass if they are dirty?
The ends of tempered glass are the most vulnerable spot. To clean them, use a soft toothbrush and soapy water. Rinse thoroughly and dry. Do not use sharp objects (knives, screwdrivers) to remove stuck dirt in the grooves so as not to damage the protective layer or structure of the glass.