How to adjust the temperature in the refrigerator Iceberg: instructions for all models

Refrigerators of the brand Iceberg (or Iceberg in Latin transliteration) are popular due to the combination of affordable price, reliability and adaptability to Russian operating conditions. However, even in simple models, setting the temperature regime raises questions: where are the regulators located, what values ​​are considered optimal, and why food freezes or, conversely, spoils faster than it should. This article will help you understand the nuances of adjustment for all lines Iceberg —from classic single-chamber to modern two-compressor systems No Frost.

It is important to understand that incorrectly set temperatures not only shorten the shelf life of products, but also increase energy consumption. 15–30%. And in models with mechanical control (for example, Iceberg BN 105 or ATR 140), errors in the settings can lead to ice formation on the back wall or overload of the compressor. We will look in detail at how to avoid these problems, which modes are suitable for different types of products, and what to do if the refrigerator does not maintain the set temperature.

Where is the temperature regulator in the Iceberg refrigerator

The location of the controls depends on the model and type of cooling system. In most refrigerators Iceberg the controls are located on the front panel or hidden inside the chamber - they are easy to miss if you don’t know where to look. Here are the main options:

• 🔄 Mechanical regulator (rotary disk or slider) - most often located inside the refrigerator compartment on the right wall, less often - on the top panel outside. Example: models Iceberg BN 108, ATR 125.
• 📱 Electronic panel —in modern models (for example, Iceberg NRF 186 or NRF 220) the control is displayed on the display on the door. The temperature is adjusted using the “+”/“–” buttons or touch keys.
• ❄️ Separate regulators for the freezer —in two-chamber refrigerators (for example, Iceberg ATR 185) there can be two independent thermostats: one for the refrigerator compartment, the other for the freezer.

In models with a system No Frost (for example, Iceberg NRF 205) the regulator is often combined with the mode button Super Freeze (quick freezing). If you cannot find the controls, check the instructions for your specific model - sometimes they are hidden under a decorative panel or behind the egg tray.

Optimal temperature conditions for the refrigerator and freezer

Manufacturer Iceberg recommends maintaining a temperature in the refrigerator compartment from +2°C to +5°C, and in the freezer - from –18°C to –24°C. However, these values can be adjusted depending on:

• 🥦 Type of stored products —meat and fish require lower temperatures (+1...+3°C), and fruits and vegetables are better preserved at +4…+6°C.
• 🌡️ Room temperatures - if the kitchen is hotter than +30°C, the refrigerator will have to be set 1-2 notches colder.
• 🏠 Door opening frequencies - in families with children or with active use of the temperature should be reduced by 1 degree.

For convenience, we have compiled recommendations in the table:

⚠️ Attention: If your model Iceberg does not have a digital display, focus on the conventional divisions regulator As a rule, middle position (3–4 divisions out of 5–7) corresponds to +4°C in the refrigerator compartment. To accurately measure the temperature, use a thermometer for refrigerators (costs 100–200 rubles).

How to adjust the temperature in an Iceberg refrigerator with mechanical control

Mechanical regulators are found in most budget models Iceberg, such as BN 105, ATR 140 or ATR 160. They are a rotary disk with divisions from 1 to 5 (less often up to 7), where 1 - the warmest setting, and 5 - the coldest. Here are step-by-step instructions:

1. Find the regulator - usually it is located on the right wall inside the refrigerator compartment, less often - on the top panel outside.

2. Rotate the dial clockwise to increase coldor counterclockwise to decrease. One division changes the temperature by approximately 2–3°C.

3. For standard mode, set the regulator to 3–4 (this corresponds to +4°C).

4. Wait 6-8 hours for the temperature to stabilize, then check it thermometer.

In two-chamber models (for example, Iceberg ATR 185) there may be two separate regulators: one for the refrigerator compartment, the other for the freezer. The freezer usually has divisions from MIN (-12°C) to MAX (–24°C).

Find the disk inside the refrigerator compartment (usually on the right)

Set to 3-4 division for +4°C

Wait 6–8 hours for stabilization

Check the temperature with a thermometer

Adjust if necessary-->

⚠️ Attention: In models with drip defrosting system (for example, Iceberg ATR 125) do not set the regulator to maximum (5–7) for more than 24 hours. This will lead to icing of the rear wall and overload of the compressor.

Electronic control: setting the temperature to display

Refrigerators Iceberg with electronic control (series NRF, NF) are equipped with a display and buttons or a touch panel. For example, in the model Iceberg NRF 186 the temperature is adjusted as follows:

1. Press the button Fridge (refrigerator) or Freezer (freezer) to select zones.

2. Use the “+”/“–” buttons or touch arrows to set the desired value. Range for refrigerator: +2°C to +8°C, for freezer: –16°C to -24°C.

3. Press OK or wait 5 seconds - the settings will be saved automatically.

4. Some models (for example, NRF 220) have a button Super Cool (fast cooling) - it temporarily lowers the temperature to +2°C for 6 hours.

If the display shows an error (for example E1 or H1), this may indicate a problem with the temperature sensor. In this case:

• 🔌 Unplug the refrigerator for 10 minutes, then turn it on again.
• 📞 If the error persists, contact the service center - the thermostat may need to be replaced.

Frequent errors when adjusting the temperature and their consequences

Even experienced users sometimes make mistakes that lead to food spoilage or breakdowns. Here are the most common ones:

• ❄️ Too low a temperature (below +2°C) - leads to freezing of vegetables, milk, and in the freezer - to excessive energy consumption. In models with No Frost this accelerates fan wear.
• 🔥 Temperature is too high (above +6°C) is dangerous for meat, fish and dairy products. In the freezer at –12°C instead of –18°C, the shelf life of food is reduced by 2 times.
• 🚪 Frequent opening of the door - if the refrigerator is in the aisle or next to the stove, the compressor works non-stop, trying to compensate for the heat. This leads to overheating and breakdown.
• 🌡️ Ignoring the external temperature —in the summer heat (+30°C and above), the refrigerator should be set 1-2 notches colder than in winter.

B Iceberg models with one compressor (for example, ATR 140) adjusting the freezer temperature automatically changes the mode in the refrigerator compartment. If you set -24°C in the freezer, the refrigerator compartment can cool down to +1...+2°C, which will lead to freezing of food.

⚠️ Attention: If, after changing the settings, the refrigerator does not cool or, on the contrary, works without stopping, check:

• The tightness of the door closure (perhaps the seal or dishes are in the way).
• The presence of ice on the back wall (in models without No Frost this indicates a malfunction of the thermostat).
• Arrangement of products - do not overload the shelves and do not place hot dishes.

How to check if they are correct Is the Iceberg refrigerator working

To make sure that the refrigerator maintains the set temperature, follow these steps:

1. Place the thermometer in a glass of water and place it on the middle shelf of the refrigerator compartment. In the freezer, the thermometer can be placed between the foods.

2. Close the door and do not open it for 8-12 hours (it is better to check at night).

3. Compare the readings with the specified settings. Permissible deviation: ±1°C for the refrigerator compartment and ±2°C for the freezer.

4. If the temperature differs greatly, adjust the regulator and repeat the measurement.

In models with electronic control (for example, Iceberg NRF 186), you can use the built-in self-diagnosis function:

1. Press the button Super Cool for 5 seconds.
2. The display will show the current temperature in both chambers (for example, F5 — +5°C in the refrigerator, M18 — –18°C in freezer).

What to do if the Iceberg refrigerator does not keep the temperature?

If, after adjustment, the temperature continues to “float” or the compressor works without stopping, the reasons may be the following:

1. Thermostat malfunction —requires replacement (part cost: 800–1500 rubles).
2. Freon leakage —determined by the lack of cold when the compressor is running.
3. Capillary blockage tubes —typical for older models (more than 10 years of operation).
4. Problems with the electronic board —relevant for refrigerators with a display (NRF series).

In these cases, self-repair is not recommended - contact an authorized service center Iceberg.

Tips for saving energy without losing cooling quality

The refrigerator Iceberg consumes from 200 to 400 kWh per year, depending on the model. To reduce your electricity costs without damaging your products, follow these recommendations:

• 🌙 Night mode —if your model has a function Eco or Sleep, activate it during sleep. This will reduce consumption by 10–15%.
• 🍲 Cooling hot dishes —do not put pots or pans in the refrigerator immediately after cooking. Wait until they cool down to room temperature.
• 🧊 Defrosting —in models without No Frost (for example Iceberg ATR 160) frost more than 5 mm thick increases energy consumption by 20%. Defrost the refrigerator every 3-6 months.
• 🔌 Location —do not place the refrigerator next to the stove, radiator, or in direct sunlight. The optimal distance from the wall is 5–10 cm for ventilation.

In two-compressor models (for example, Iceberg NRF 220), you can turn off the freezer if it is not in use. To do this:

1. Press the button Freezer and hold it for 3 seconds.
2. The display will show the message OFF —the freezer will stop cooling, but the refrigerator will work as usual.

Features of adjustment in Iceberg refrigerators with No Frost

Models with a system No Frost (for example Iceberg NRF 186, NRF 205) automatically maintain the temperature and do not require defrosting. However, they have their own nuances:

• 🌀 Fan — provides air circulation, but can create noise (up to 45 dB). If the refrigerator becomes louder, check whether food packaging is blocking the air flow.
• 🌬️ Dry air —due to constant circulation, food may dry out. Store them in containers or wrap them in cling film.
• ⚡ Energy consumption - systems No Frost consume 10–15% more electricity than drip counterparts.

In refrigerators Iceberg s No Frost the temperature is regulated separately for each chamber. For example, in the model NRF 220:

• Refrigerator compartment: +2°C…+8°C (recommended +4°C).
• Freezer compartment: –16°C…–24°C (optimally –18°C).

If ice forms in the freezer despite the system No Frostthis may indicate:

• Clogged drain hole (clean with a cotton swab).
• Faulty evaporator heater (requires repair).
• Frequent opening of the door in conditions of high humidity.

⚠️ Attention: In refrigerators Iceberg s No Frost you cannot use sharp objects to remove ice - this will damage the evaporator. To clean, use a plastic scraper or a soft sponge.

FAQ: Frequently asked questions about adjusting the temperature in the Iceberg

How to reset the temperature settings to factory settings in an Iceberg refrigerator with an electronic control?

In most models (for example, NRF 186, NRF 205), the reset is performed as follows:

1. Unplug the refrigerator for 1 minute.
2. Turn it back on and immediately hold down the buttons Fridge and Freezer for 5 seconds.
3. The display will show rSt (reset), after which the settings will return to the factory settings (+5°C in the refrigerator, -18°C in the freezer).

If this the method does not work, please refer to the instructions for your model.

Why does the freezer work in the Iceberg ATR 140 refrigerator, but the refrigerator compartment does not?

This problem is typical for single-compressor models. Possible reasons:

• Clogged capillary tube - requires cleaning or replacement.
• Malfunction of the refrigeration chamber thermostat (replacement cost: 1000–1500 rubles).
• Refrigerant leak in the refrigeration chamber circuit.

For diagnostics, turn off the refrigerator for 12 hours, then turn it on again. If the refrigerator compartment does not start to cool, call a technician.

Is it possible to turn off the freezer in a two-chamber Iceberg refrigerator?

Yes, in most two-compressor models (for example, Iceberg NRF 220) the freezer can be turned off:

1. Press and hold the button Freezer 3–5 seconds.
2. The indicator will appear on the display OFF.
3. The refrigerator compartment will continue to operate as normal.

In single-compressor models (for example, ATR 185) it is impossible to turn off the freezer without consequences for the refrigerator compartment.

What temperature should be in the Iceberg refrigerator for storing medicines?

For most medications (insulin, vaccines, some antibiotics) a temperature is required +2°C…+8°C. In the refrigerator Iceberg to do this:

1. Set the regulator to 2-3 divisions (if mechanical) or +4°C (if electronic).
2. Place the medications on the top shelf (the coldest place).
3. Use a thermometer for control - deviations of more than ±1°C are unacceptable.

Do not store medicines in the door - the temperature there is less stable.

What to do if, after adjustment, the temperature in the Iceberg refrigerator does not change?

If changing the settings does not have an effect, check:

• The tightness of the door closure - perhaps the seal or dishes are in the way.
• The operation of the fan (in models with No Frost) - if it does not spin, repair is required.
• The presence of ice on the back wall - in models without No Frost This indicates a malfunction of the thermostat.

If the problem persists, call a technician - the compressor or electronic unit may be faulty.